Student Alumni
List of student alumni on this page is sorted in reverse chronology and according to the program in which they were graduated.
Ph. D.
2021-till date
2021
| Kundan Kumar Verma (ERP) | Suryasarathi Bose, Subodh Kumar & Ramesh Sundram (Orgn) | Tufting of carbon fibre/epoxy composites laminates for improved damage tolerance |
| Fiyanshu Kaka | Abhik N Choudhury & Praveen C Ramamurthy | Numerical and Experimental Investigation of ProcessStructure- Property Relationship in Organic Photovoltaics |
| Ashutosh Jangade | Subodh Kumar | Evolution of plasma electrolytic coatings formed on AM50 Mg alloy utilizing various alkaline electrolyteswith and without glycerol additive and its corrosion behaviour |
| Levie Mweene | Praveen C Ramamurthy & Subramanian S | Polymer-based investigations into the surface chemistry of some sulphide minerals and beneficiation of a low grade siliceous copper ore |
| Tanyaradzwa Sympathy Muzata | Suryasarathi Bose | Understanding the demixing behavior and structure-property correlation in graphene oxide containing LCST blends |
| Esakkiraja N | Aloke Paul & Vikram Jayaram | Pseudo-binary and Pseudo-ternary diffusion couple methods for understanding the growth of interdiffusion zone between bond coat and superalloys |
| Mousumi Beto Mukherjee | Ashok Raichur | Application of Mesoporous Silica nanoparticles as a nano-carrier for the treatment of HCV and HIV infections |
| Arnab De | Rajeev Ranjan | Lanthanide Photoluminescence: A Tool for Analyzing Local Heterogeneity in Ferroelectrics and Scope for High Performance Optical Thermometry |
| Gobinda Das Adhikary | Rajeev Ranjan | Role of in-phase octahedral tilt influencing structure and properties in Na0.i5Bi0.5Tio3 – based piezoceramics |
| Sweety Arora | Chandan Srivastava | Electrochemical Behavior of Metallic Coatings Containing Carbonaceous Additives |
| Shrutee L | Govind S Gupta | Experimental study of the multiphase flow in the presence of raceway in the packed beds |
| Sonawane Dipali Shivaji | Praveen Kumar | Mechanical Reliability of Metal-Si Systems at different Length scales under Thermal Cyclic Loading |
| Yudhajit Bhattacharjee | Suryasarathi Bose | Polyvinylidene fluoride (PVDF) based Nanocomposites with Multi-layered Architecture Containing Core-shell Nanomaterials for Electromagnetic Interference Shielding |
2020-2011
2020
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Alaparti H V Pavan (ERP) | Ashok M Raichur & Kulvir Singh (Org) | High Temperature Mechanical Behavior of Ni-based Alloys for Advanced Ultra Supercritical Power Plant Applications |
| Rekha M Y | Chandan Srivastava | Microstructure and Corrosion Properties of Electrodeposited Metallic Coatings Containing Graphene Oxide and Graphene |
| Saurabh Mohan Das | Chattopadhyay K & Aloke Paul | Improvement of high temperature oxidation resistance of ‘W’ of free y’-strenthened Co-based superalloys through alloying addition |
| Manu S Mohan | Dipankar Banerjee & Vikram Jayaram | Microstructure and Shape Memory Behavior of Quaternary Ni (50-x)-(Pt/Pd)x-Ti(50-y)-(Hf/Zr)y Alloys |
| Abhishek Chaturvedi | Ramamurty U (Retd), Ashok M Raichur & Asokan S, IAP | Nnao-mechanical, optical and structural property correlations in binary, ternary and quaternary tellurium- based chalcogenide glasses |
| Anuja J | Ramamurty U (Retd), Praveen Kumar & Narasimhan R, ME | Numerical simulations on the indentation behavior of shape memory alloys |
| Devi Lal | Vikram Jayaram & Praveen Kumar | Effect of Sintering on Microstructure and Mechanical Properties of Air Plasma Sprayed 7 wt.% Y203 Stabilized ZrO2 |
| Krishna Kamlesh Verma | Subodh Kumar & Satyam Suwas | Development of a wrought Mg‒7Sn‒3Zn alloy with improved strength and ductility |
| Syed Idrees Afzal Jalali | Vikram Jayaram & Praveen Kumar | Bending-Creep, High Throughput Testing, Size Effects in Creep |
| Bhalchandra Bhadak | Abhik N Choudhury | Phase-field modelling-of equilibrium shapes of precipitate and growth instabilities in the presence of coherency stresses |
| Srijan Acharya | Kaushik Chatterjee & Satyam Suwas | Development of a low modulus Ti-Nb-Ta-O alloy for orthopedic applications |
2019
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Biswaranjan Dash | Karthikeyan S | Strain hardening in extruded pure magnesium |
| Punit Kumar | Ashok M. Raichur | Microstructure and mechanical properties of a 3D printed titanium alloy |
| Shalini Roy Konru | Dipankar Banerjee & Abinandanan T. A | Modelling chemistry and structure of concentrated alloys at the atomic scale |
| Narayan Bastole | Rajeev Ranjan | Novel phenomena associated with giant tetragonality in the ferroelectric BiFeO3-PbTiO3 system |
| Naveen Kumar | Abinandanan T.A | Co-continuous microstructures through spinodal decomposition in ternary systems: A phase field study |
| Nalla Somaiah | Praveen Kumar | Mass Transport in Cu-Interlayer-Si Systems under various Thermo-Electro- Mechanical Excursions |
| Swati Biswas (ERP) | Dipankar Banerjee, Karthikeyan S & Ramachandra S(Orgn) | Mechanical Behavior of a Directionally Solidified Nickel-based Superalloy Su 247LC DS at Elevated Temperature |
| Prince Raj | Govind S Gupta | Optimizations of parameters in SiC production via Acheson process – A hot model study |
| Prafull Pandey | Chattopadhyay K & Chandan Srivastava | On the development of low mass density γ’- strengthened Co-based Superalloys |
| Prajakta Prathamkumar Katti | Subodh Kumar & Suryasarathi Bose | Structure-Property correlation in epoxy composites containing carbonaceous nanoparticles |
| Nitish Bibhanshu | Satyam Suwas | Thermo-Mechanical Processing Of Third Generation Γ – Titanium Aluminides |
2018
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Agrawal Priyanka Kantibhai | Dipankar Banerjee | Dynamic Strain Aging and Creep in near-a Ti Alloy, IMI834 |
| Varun Arvind Baheti | Aloke Paul & Praveen Kumar | Diffusion-controlled growth of phases in metal-tin systems related to microelectronics packaging |
| Arka Lahiri | Abhinandanan T. A | Theoretical and numerical study of microstructure formation in multi-component alloys |
| Dipak Kumar Khatua | Rajeev Ranjan | Insights into the influence of electric fled on the Structural evolution and its correlation with the Properties in the lead-based BiScO3-PbTiO3 and the lead-free Na0.5Bi0.5TiO3 based piezoceramics |
| Y. Raghupathy | Chandan Srivastava | Nano surface modification for anti-corrosive and anti-Biofouling applications |
| Aparajita Pramanik | Karthikeyan S | Effect of copper on strength of super 304H austenitic stainless steel |
| Udayagiri Sai Babu | Karthikeyan S | Atomistic simulation of grain boundary effects on cascade damage in vanadium |
| Venkata Vamsi Koruprolu | Karthikeyan S | Planar fault energies in L2 compounds |
| Kaustubh Venkatraman | Vikram Jayaram | Testing methodologies for probing site specific fatigue response of graded coatings |
| Senthilkumar S. (ERP) | Vikram Jayaram | Studies on internal reforming solid oxide fuel cell |
| Sumit Bahl | Kaushik Chatterjee & Satyam Suwas | Nanoscale surface engineering of metallic biomaterials for enhancement of mechanical and biological responses |
| Gopakumar P. (ERP) | Vikram Jayaram &Krish Sridhar (Orgn | Influence of surface topography and tribosystem on reciprocating friction in sparsely lubricated contacts |
| Rajib Kalsar | Satyam Suwas | Evolution of microstructure and texture in manganese steels |
| Sai Rama Krishna Meka | Kaushik Chatterjee | Engineering bioactive polymer/ceramic composite nanofibrous scaffolds for bone tissue regeneration |
| Deepak Sharma | Praveen Kumar | Synergistic effect of electromagnetic forces on the failure of pre-cracked thin metallic conductors |
| Sabyasachi Saha (ERP) | Dipankar Banerjee & Dr. K. Muraleedharan (Org | TEM characterization of microstructural evolution of GaN growth by MOCVD on c-sapphire |
| Hariprasad | Atul H. Chokshi | Synthesis, microstructural stability and high temperature deformation of alumina-carbon nanotube composites |
| Sambit Bapari | Atul H. Chokshi | The role of polymer phase on rigidity percolation of ABS-spherical nickel microparticles composites |
| Raut Devaraj Krishna | Ramamurty U. | Studies on fracture in ductile bulk metallic glasses |
| Arul Varaman | Praveen C. Ramamurthy | Organic – inorganic hybrid photovoltaics: interface engineering, fabrication and characterization |
| More Abhishek Mukund (QIP | Satyam Suwas | Effect of processing on texture and microstructure in aluminium – lithium alloys and its consequences on mechanical properties |
| Abishek Sharma | Kamanio Chattopadhyay, Dipankar Banerjee & Abinandanan T. A | An evaluation of mechanical behaviour of some new high temperature alloys |
| Rani Rohini | Suryasarathi Bose | Electromagnetic interference shielding materials derived from epoxy based nanocomposites |
| Goutam Prasanna Kar | Surayasarathi Bose | Structure-property correlation in binary immiscible polymer blends compatibilized by mutually miscible homopolymer and carbonaceous nanoparticles |
| Mulualem Abebe Mekonnen | Rajeev Ranjan | Structure-property correlation studies on Ca-modified Ba(Ti, Zr/Sn)O3 ceramics |
| Vinila N. V | Praveen C. Ramamurthy | Architecting conjugated molecules for band gap engineering and photostability |
| Chandra Shekhar P | Subodh Kumar & Satyam Suwas | Development of wrough Mg-Li based alloys with improved strength and ductility |
2017
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Suman Sarkar | Kamanio Chattopadhyay & Chandan Srivastava | Development of new high strength alloy in Cu-Fe-Si system through rapid solidification |
| Atanu Chaudhuri | Satyam Suwas | Hot deformation behaviour of some refractory metals and alloys |
| Joshi Chaitanya Amol | Abhinandanan T. A | Destabilisation and failure of cylindrical nanopores: A phase field study |
| Maya Kini K | Atul H. Chokshi | Interfacial processes in densification of cubic zirconia |
| Mithipati Siva Bhaskar | Abhinandanan T. A | Precipitate growth and coarsening in ternary alloys |
| Piyush Vijay Jagtap | Praveen Kumar | Whisker growth from electrodeposited Sn coatings |
| Himalay Basumatary (ERP) | Rajeev Ranjan & J. Arout Chelvane (DMRL) | Structure, microstructure and magnetic properties of Fe-Ga and R-Fe based magnetostrictive thin films |
| Allwin Ebinesar J. S | Subramanian S. | Bioremediation of zinc using pseudomonas species: mechanistic studies and biosensing applications |
| Adrash K. Hegde | Vikram Jayaram | Dry sliding wear of saffil short fibre-reinforced AZ91D Mg-alloy composite |
| V. Ezhilselvi | Subramanian S. | Development of corrosion protective coating systems for AZ31B magnesium alloy |
| Pawar Shital Patangrao | Suryasarathi Bose | EMI shielding materials derived from Pc/SAN blends containing engineered nanoparticles |
| Suryawanshi Jyoti Balaji | Ramamurty U. | Mechanical and corrosion properties of selective laser melted alloys |
| Sumanth G. | Vikram Jayaram | Effect of humidity and temperature on wear of TiN and TiAIN coatings |
| Megha Sahu | Ashok M. Raichur | Nanostructured toughening agents for tetrafunctional epoxy composites |
2016
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Lalitha K. V. | Rajeev Ranjan | Correlation between structure, microstructure and enhanced piezoresponse around the morohotropic phase boundary of bismuth scandate-lead titanate piezoceramic |
| Sreeranjini P. | Ashok M. Raichur | Hyaluronic acid based biodegradable polyelectrolyte nanocapsules and modified protein nanoparticles for targeted delivery anticancer agents |
| Ajay Kumar Kalyani | Rajeev Ranjan | Electric field driven structural transformations in BaTiO3 and lead zirconate titanate (PZT) based piezoceramics |
| Badari Narayana Rao | Rajeev Ranjan | Influence of electric field on the global and local structure in ferroelectric ceramic Na1/2Bi1/2TiO3 and its solid solutions with BaTiO3 and K1/2Bi1/2TiO3 |
| N. Venkatesh | Chandan Srivastava | Nanoparticles for bio-imaging, magnetic resonance imaging and fluorescence imaging |
| Divyasree C. Prabhakaran | Subramanian S. | Bioremediation of chromium: mechanisms and biosensing applications |
| Surendra Kumar M. | Kamanio Chattopadhyay & Subodh Kumar | In improvement of high temperature strength of Al and Co alloy by L12 type coherent precipitates |
| Dhanalakshmi P. | Kamanio Chattopadhyay & Chandan Srivastava | Synthesis and phase transformation studies of Al45Mn55 ferromagnetic Heusler alloy |
| P. Padaikathan (SR) | Kamanio Chattopadhyay | Development of high temperature aluminium alloys through microstructure control |
| R. Veerababu (ERP) | Karthikeyan S. & R. Balamurali | Microstructural studies on high Cr-Mo secondary hardening ultra-high strength steels |
| Kothai V. | Rajeev Ranjan | On the factors influencing the stability of phases in the multiferroic system BiFeO3-PbTiO3 |
| Ashwini N. Mallya | Praveen C. Ramamurthy | Design and fabrication of conjugated molecule based resistive sensor for environmental monitoring detecting targeted analytes |
| Saravanan S | Praveen C. Ramamurthy | Moisture barrier polymer nanocomposites for organic device encapsulation |
| Shanoob B. | Dipankar Banerjee | Effect of thermomechanical processing on microstructure and microtexture evolution in titanium alloys |
| Amit Sharma | Satyam Suwas | Evolution of crystallographic texture and microstructure in sputter deposited NiMnGa thin films and their influence on magnetic properties |
| Krishna Yaddanapudi G. R. | Dipankar Banerjee | Effect of process parameters on the growth of N-polar GaN on sapphire by MOCVD |
| Priti Xavier | Suryasarathi Bose | Mapping the transient morphologies and demixing behavior of polystyrene/poly(vinyl methyl ether) blend in the presence of multiwall carbon nanotubes |
| Vimalnath S. | Subramanian S. | Bioremediation of lead from aqueous solutions using pseudomonas species-mechanisms & biosensor |
| Sangeeta Santra | Aloke Paul | Diffusion-controlled growth of A15-based Nb3Sn |
| K. S. Vinay (M. Sc.) | Dipankar Banerjee | Micro structural evolution of directionally solidified Ni-Al-Re/Ru alloys |
| Sowmya M. V. | Subramanian S. | Studies on bioremediation of Cr (VI) using indigenous bacterials strains isolated from chromite mine |
| Arun D. | Praveen C. Ramamurthy | Interface engineering and evaluation of device performance in organic photovoltaics |
| Khadija Kanwal Khanum | Praveen C. Ramamurthy | Morphological architecturing of electroactive materials inorganic electronics |
| Sachin Kumar B. | Kaushik Chatterjee | Engineering bioactive and multifunctional graphene polymer composites for bone tissue regeneration |
| Saurabh Dixit | Kamanio Chattopadhyay & Satish V. Kailas | Study of development of aluminum based metal matrix composites using friction stir processing |
| Gunjal Vilas Vishnu | Kamanio Chattopadhyay & Dipankar Banerjee | Microstructural, mechanical and oxidation behavior of Ni-Al-Zr intermetallic eutectic alloys |
| George Rapheal | Subodh Kumar | Corrosion and wear behavior of plasma electrolytic oxidation and laser surface alloy coatings |
2015
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Chandra Sekhar Tiwary | Kamanio Chattopadhyay | Microstructural, Mechanical and Oxidation behavior of Ni-Al-Zr Ternary Alloy |
| R. Lakshmi Narayan | Ramamurty U. | Fracture and deformation in bulk metallic glasses and composites |
| Dulal Chandra Jana (ERP) | Kamanio Chattopadhyay & G. Sundarajan (ARC) | Dense and porous Silicon Carbide Ceramics Processed through Aqueous gelcasting and Studies of Densification kinetics |
| Soumya S. Bhat | Ramamurty U.& Umesh V. Waghmare | First-Principles Studies of Point Defects and phase transformations in materials |
| Midhun Ben Thomas | Ashok M. Raichur& V. Nagaraja (MC) | Therapeutic Applications of Biodegradable Chitosan Based Polyelectrolyte Nanocapsules |
| Rama Krushna Sabat | Satyam Suwas | Evolution of microstructure and texture during severe plastic deformation of a Magnesium-Cerium alloy |
| Rajesh Korla | Chokshi A. H. | Grain Boundary Sliding in Bicrystals: Experiments and Atomistic Simulations |
| R. Rajasegaran | Ashok M. Raichur | Biodegradable Polyelectrolyte Multilayered Nanocapsules as Carrier for Liver Targeted Gene Delivery in ice and Magnetic Field Enhanced Anticancer Drug Delivery against Drug Resistant Cancers |
| Sukla Mondol | Kamanio Chattopahdyay & Subodh Kumar | Improving high temperature strength of 2219 Al alloy by minor alloying additions |
| Olu Emmanuel Femi | Kamanio Chattopahdyay & Ravishankar N. | Microstructure Design and Interfacial Effects on Thermoelectric Properties of Bl-Sb-Te System |
2014
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Praveena M. | Vikram Jayaram | Design, Fabrication and Application of In situ Total Internal Reflection (TIR) Raman Tribometer For the Chemical analysis of Tribological Systems |
| Ranjith K. | Praveen C. Ramamurthy | Design and Synthesis of Band GAP Engineered Conjugated Molecules for Organic electronics |
| Govind | Ramamurty U. & D. Sivakumar (VSSC) | Effect of Li Addition on the Plasticity of AZ31 Mg-alloy |
| Rohini Garg | Rajeev Ranjan | Structural, ferroelectric, piezoelectric and phase transition studies of lead free Na0.5BiO.5TiO3 based ceramics |
| Shyam Kanta Sinha | Kamanio Chattopadhyay, Chandan Srivastava & S. Sampath (IPC) | Synthesis and TransformatinofAUCu Intermetallic Nanoparticles |
| Satyajit Gupta | Praveen C. Ramamurthy & M. Giridhar (CH) | Development of Hybrid Organic/Inorganic composites as a Barrier Material for organic Electronics |
| Manish Patel | Vikram Jayaram & V. V. Bhanu Prasad (DMRL) | Densification, Oxidation, Mechanical and Thermal Behaviour of Zirconium Diboride (ZrB2) and Zirconium Diboride-Silicon Carbide (ZrB2-SiC) Composites |
| Hindol Bandyopadhyay | Karthikeyan S. | Effect of Processing and test variables on the deformation characteristics of tantalum |
| Soupitak Pal | Vikram Jayaram | Microstructural Developments and Mechanical Properties of Electroless Ni-B Coating |
| Nagamani Jaya B. | Vikram Jayaram | Micro-scale fracture testing of graded (Pt,Ni)Al bond coats |
| Rajendra Kurapati | Ashok M. Raichur | Investigation of Graphene Oxide based Multilayered Capsules Films for Drug Delivery and Antimicrobial Applications |
| Sudha J. | Subodh Kumar | Effect of heat treatment and modification on flow and fracture behavior of a newly developed Al-Si based cast alloy |
| Pradipta Ghosh | Chokshi A. H. | Length Scale effects in deformation of polycrystalline nickel |
| Soumitra Roy | Aloke Paul | Interdiffusion study in group IVB, VB and VIB refractory metal-silicon systems |
| Gaurav Singh | Ramamurty U. | Some Mechanical Properties of Ti-6Al-4V-B alloys |
| Krishna R. | Ashok M. Raichur | Design & Fabrication of Bio-responsive Drug Carriers Based on Protamine & Chondroitin Sulphate Biopolymers |
| R. K. Sidharada Devarapalli | Kamanio Chattopadhyay | Synthesis and Characterization of Intermetallic Coatings by Laser Cladding and Novel Ball Milling Approach |
| Shailesh Kumar | Kamanio Chattopadhyay & Pradip Dutta (ME) | Experimental and Numerical Investigation on Friction Welding of Thixocast A356 Aluminium alloy |
| Tomoghna Chakrabarti | Vikram Jayaram | Study on Reactive Hot Pressing of Zirconium Carbide |
| Kirtiman Deo Malviya | Kamanio Chattopadhyay | Synthesis and study of microstructure evolution in nanoparticles of immiscible alloys by laser ablation under liquid medium |
| Alex Joseph | Subramanian S. & Praveen C. Ramamurthy | Synthesis and Characterization of Functionalized Electroactive Polymers for Metal ion Sensing |
| Madhavan R. | Satyam Suwas | Role of stacking fault energy on texture evolution in micro and nano-crystalline Nickel-Cobalt alloys |
2013
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Prasath Babu R. | Karthikeyan S. | Microstructural stability of fully lamellar and duplex γ TiAl alloys during creep |
| Nisha Verma | Vikram Jayaram | Mechanism and modeling of contact damage in ZrN-Zr and TiAlN-TiN multilayer hard coatings |
| Dibyendu Chakravarty (ERP) | Chokshi A. H.& Sundarajan A. (ARCI) | Densification Mechanisms for Spark Plasma Sintering in Alumina and alumina Based systems |
| Mithun Palit (ERP) | Kamanio Chattopadhyay & S. Pandian (DMRL) | An investigation on the effect of structural and Microstructure Attributes on magnetostriction of Tb-Dy-Fe and Fe-Ga alloys |
| Md. Zafir Alam (ERP) | Vikram Jayaram, Dipak K. Das (DRDO) & Samir V. (DRDO) | Tensile behavior Of free-standing Pt-Aluminide (PtAl) bond coats |
| Vyasa Vikasa Shastry | Ramamurty U. | Some processing and mechanical behaviour related issues in Ti-Ni based shape memory alloys |
| Chandan Mondal | Kamanio Chattopadhyay | Evolution of Texture and its Correlation with Microstructure and Mechanical Property Anisotropy in AA7010 Aluminum Alloy |
| Swathi S. K. | Praveen C. Ramamurthy | Thiophene Derivative Photovoltaics: Device Frabrication, Optimization and Study of Charge Transport Characteristics |
2012
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Anandhakumar S. | Ashok M. Raichur | Intelligent Microcontainers: Fabrication, Characterization and Tunable Release Properties for Drug Delivery |
| Shibayan Roy | Satyam Suwas | Role of boron on the evolution of micro-structure and texture in Ti-6AL-4V-O.1B alloy |
| Anil Chandra A. R. | Surappa M. K. & Ashok M. Raichur | Microstructure and mechanical Properties of Consolidated Mgnesium Chips |
| Sivaprahasam D. (ERP) | Kamanio Chattopadhyay & Sundararajan R. (Orgn) | Studies on synthesizing Fe and Fe-Cu nanopowders by invitational gas condensation process and their consolidation characteristics |
| Vasanthakumar B. | Subramanian S. | Studies on the isolation and characterisation of bioreagents for the flotation of sphalerite from galena-sphalerite system |
| Chander Shekhar | Jacob K. T. | Studies on Thermodynamics and Phase Equilibria of Selected Oxide Systems |
| Sanjay Kashyap | Kamanio Chattopadhyay | Stuides on bulk and multilayer composites of Nb-Si alloys |
| Ashish Jain (ERP) | Govind S. Gupta & Anthonysamy S. (IGCAR) | Characterization of elemental boron synthesized by electrolytic method |
| Suresh K. S. | Satyam Suwas | Evolution of Texture and Microstructure in Some NiTi Based Alloys and Their Impact on Shape Memory Behavior |
2011
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ramesh Narayanan P. (ERP) | Vikram Jayaram | A Study of Crystallographic Texture, Residual Stresses and Mechanical Property Anisotropy in aluminium Alloys for Space Applications |
| Sudarashan | Surappa M. K. & Chokshi A. H. | Magnesium Matrix-Nano Ceramic Composites by In situ Pyrolysis of Organic Precursors in a Liquid Melt |
| R. Krishnan (ERP) | Vikram Jayaram | Investigations on the properties of TiN, NbN thin films and multilayers by Reactive pulsed laser deposition |
| K. Eswara Prasad | Ramamurty U. | Plastic deformation during indentation of crystalline and amorphous materials |
| Rajdip Mukherjee | Abinandanan T. A. | Phase Field Modelling of Polycrystalline Materials with Surface |
| Soma Prasad | Aloke Paul | Interdiffusion Studies in Metal –Silicon Systems |
| Divya V. D. | Aloke Paul & Ramamurty U. | Diffusion studies on systems related to Nickel based syperalloys |
2010-2001
2010
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Santonu Ghosh | Chokshi A. H. | Grain boundary processes in high temperature densification and deformation of nanocrystalline Zirconia |
| Chirantan Ghosh | Aloke Paul | A Physico-chemical Approach in Binary Solid –State Interdiffusion |
| Indrani Sen | Ramamurty U. | Mechanical Behavior of B-Modified Ti-6A1-4V Alloys |
| M. J. N. V. Prasad | Chokshi A. H. | Microstructural Evolution and Superplasticity in Electrodeposited Nano-Nickel and Alloys |
| Nilesh Prakash Gurao | Satyam Suwas | Some critical issues pertaining to deformation texture in close-packed metals and alloys: The effect of grain size, strain rate and second phase |
| Somjeet Biswas | Satyam Suwas | Evolution of Texture and Microstructure during processing of Pure Magnesium and the Magnesium alloy AM30 |
| Arindam Paul | Vikram Jayaram | The Processing, Consolidation the Deformation Behavior of Bulk Amorphous Al2O3-Y2O3 Ceramics |
2009
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Gopinath Kakkoprath (ERP) | Ramamurty U. | Tensile and Low Cycle Fatigue Behavior of a Ni-Base Superalloy |
| L. Rangaraj (ERP) | Vikram Jayaram | Reactive hot pressing of ZrB2-based ultra high temperature ceramic composites |
| Ashok Kumar Mondal | Subodh Kumar | Creep, Wear and Corrosion Behaviour of Novel Magnesium Alloys and Composites |
| Bhaskar Prasad Saha | Vikram Jayaram | Processomg of Zirconia based honeycombs and Evaluation of thermo mechanical properties |
2008
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Pradeep Lancy Menezes | Kishore & Satish V. Kailash (ME) | Role of surface texture on friction and transfer layer formation: a study using pin-on-plate sliding tester |
| Radhakrishna Paniker M. R. | Chokshi A. H. | Superplastic deformation behaviour of AZ31 Magnesium alloy |
| Murli P. | Ramamurty U. | Multi-scale approaches for Understanding Deformation and Fracture Mechanisms in Amorphous alloys |
| Udaya Bhat K. | Kamanio Chattopadhyay | Studies on Dissimilar Metal Welding |
| Tripti Biswas | Ranganathan S. | Studies of glass formation in Al-La-Ni and Mg-TM-RE alloys with a structure mapping approach |
| Saswata Bhattacharya | Abinandanan T. A. | Evolution of Multivariant Microstructures with Anisotropic Misfit A Phase Field Study |
| Aditi Dutta | Ramamurty U. & Umesh V. Waghmare (JNCASR) | First Principles Study of Structure and Stacking Fault during a summer monsoon |
| Rejin Raghavan | Ramamurty U. | Effect of Free-Volume on the Fracture and Fatigue of Amorphous Alloys |
2007
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Vikrant Singh | Govind S. Gupta | Modeling of liquid flow in a packed bed under influence of gas flow |
| Subhradeep Chatterjee | Kamanio Chattopadhyay and Abinandanan T. A. | Microstructure development during laser and electron beam welding of Ti/Ni dissimilar joints |
| Partha Patra | Natarajan K. A. | Microbially-induced mineral flocculation and flotation with proteins and polysaccharides isolated from Paenibacillus Polymyxa |
| Debdutt Patro | Vikram Jayaram | Kinetics of pressureless infiltration of Al-Mg alloys into Al2O3 preforms: A non-uniform capillary model |
| Evvie Chockalingam | Subramanian S. | Studies on acid production potential of some sulphide minerals and bioremediation of acid mine drainage |
| Chandraprabha M. N. | Natarajan K. A. and Jayant M. Modak (CH) | Surface studies on sulphide minerals and Acidithiobacillus bacteria with respect to biobeneficiation and bioremediation |
2006
| Student | Advisor(s) | Thesis title |
|---|---|---|
| M. Jeyakumar | Subodh Kumar and Govind S. Gupta | Optimization of Process Parameters for Spray Deposition and Analyses of Spray Deposits for 7075 Al Alloy |
| Sarmistha Bakshi | Subodh Kumar | Processing, Characterization and Mechanical Properties of Functionally Graded Materials |
| Sabita Sarkar | Govind S. Gupta | A Cold Model Study of Raceway Hysteresis |
| Krishanu Biswas | Kamanio Chattopadhyay and P. K. Das (IPC) | Rapid Solidification Behaviour of Fe-Ge Intermetallics |
| S. P. Vijayalakshmi | Ashok M. Raichur and M. Giridhar (CH) | Degradation of Water Soluble Polymers |
| Gururajan M. P. | Abinandanan T. A. | Microstructural Evolution in Elastically Inhomogeneous Systems |
| Victoria Bhattacharya | Kamanio Chattopadhyay | Synthesis and Phase Transformation Behavior of Nano Alloys Embedded in Al |
2005
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Kay Thi Lwin | Jacob K. T. | Structure, Thermodynamics and Phase Relations in Selected Oxide Systems |
| Sibasis Acharya | Hajra J. P. and Subramanian S. | Thermodynamics and Phase Equilibria in the Systems Involving Electronic Materials |
| Subrata Pal | Lahiri A. K. | Mathematical Model of COREX Melter Gasifier |
| N. R. Sathya Swaroop | Chokshi A. H. | Determination of Lattice and Grain Boundary Diffusivities of Cations using Secondary Ion Mass Spectrometry and their Application to High Temperature Deformation in a 3 mol% Yttria Stabilized Tetragonal Zirconia |
| Madakashira Phaniraj Prabhakar | Lahiri A. K. | Modeling Constitutive Behavior of Steels and Simulation of Hot Strip Mill |
| Joysurya Basu | Ranganathan S. | Glass Forming Ability and Stability: Bulk Zr-based and Marginal Al-based Glasses |
| A. C. Niranjanappa | Dwarakadasa E. S., Subodh Kumar & Dr. K. Ramchand (Orgn) | Damage Characterization Studies on the Environmentally Degraded (Short-Term Aged) Polymer Matrix Composite Materials Subjected to Single and Repeated Low-Velocity Impacts |
| Kavitha R. | Vikram Jayaram | Development and Study of Oxide Films by Combustion Flame Pyrolysis |
| Ranjit Bauri | Surappa M. K. | Processing and characterization of Al-Li-SiCp composites |
| Saravanan L. | Subramanian S. | Surface Chemical Studies on Oxide and Carbide Suspensions in the Presence of Polymeric Additives |
| Kottada Ravi Sankar | Chokshi A. H. | Creep and grain boundary sliding in a Mg-0.7%Al alloy |
2004
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Rajashekhar Shabadi | Dwarakadasa E. S. & Subodh Kumar | Portevin Le-Chaterlier Effect and Formability Studies in Aluminium Alloys |
| Brahmandam Sudhir | Chokshi A. H. | Sintering and Rheology of Alumina Particulate Reinforced Alumino-Silicate Glass Composites |
| Amitava Mukherjee | Ashok M. Raichur | Solubilization of Cu, Co and Ni from Indian Ocean Nodules using a Marine Isolate |
| Ramanarayan H. | Abinandanan T. A. | Grain Boundary Effects on Spinodal Decomposition |
| Sanjit Bhowmick | Vikram Jayaram & Biswas S. K. (ME) | The Nature of Contact-Induced Deformation and Fracture in TiN Films on Steel |
2003
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Lakshmi Narayan Satapathy | Chokshi A. H. and Chandrasekhar B. K. (Orgn) | Role of Second Phase in the Microstructural Development and Creep Deformation in Alumina based Composites |
| M. Ravi | Dwarakadasa E. S. and B. C. Pai (Orgn) | Re-examination of the Formation of Porosity during solidification of Aluminium Alloys |
| Anuradha T. V. | Ranganathan S. | Synthesis and Characterization of Nanostructured Materials: TiO2, TiN & BaTiO3 |
2002
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Viji Varghese | Kamanio Chattopadhyay | A study of the role of mechanical energy on the kinetics of reactions and transformations in the solid state |
| Balasubrahmanyam V. V. (QIP) | Prasad Y. V. R. K. & Chokshi A. H. | Hot deformation mechanisms and microstructural characterization in (a+b) and b titanium alloys ( Ti-5.5Al-1Fe, Ti-10V-2Fe-3Al, Ti-10V-4.5Fe-1.5Al and Ti-6.8Mo-4.5Fe-1.5Al |
| D. Santhiya | Natarajan K. A. and Subramanian S. | Investigation into the surface chemistry of galera, sphalerite and sulphur minerals using Thiobacillus thiooxidans and Bacillus polymyxa |
| Avadhani G. S. (SR) | Prasad Y. V. R. K. and Chokshi A. H. | Hot deformation mechanisms and microstructural evolution during upset forging of g-Fe, Fe, Fe-5Ni, Fe-5Co & Fe-5Mo alloys and maraging steel |
| Bijoysri Khan (ERP) | Kishore & Viswanath B. | Buffer strips in carbon-epoxy system and their influence on the mechanical behaviour and macroscopic features in dry and wet state |
| Satyabodh M. Kulkarni (QIP) | Kishore | Processing, microstructural and mechanical behaviroal aspects of Fly ash-epoxy composites |
| Gandham Phani Kumar | Kamanio Chattopadhyay and P. Dutta (ME) | Experimental and Computational Studies of Laser Processing of Dissimilar Metals |
| Abha Kumari | Natarajan K. A. | Electrochemical and Microbilogical Processing of Ocean Manganese Nodules to Recover Valuable Metals |
2001
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Shankar P. | Ranganathan S. and Baldev Raj (IGCAR) | Thermal aging effects in nuclear grade 316LN austenitic stainless steels |
| Prajina Bhattacharya | Kamanio Chattopadhyay | Synthesis, morphology and phase transformation of the metallic embedded nanoparticles and multilayers |
| Anandh Subramaniam | Ranganathan S. | Metastable phases in Mg-based alloys |
| Kirity Bhusan Khan | Surappa M. K. & Ganguly C. (BARC) | Processing and characterization of B4C particle reinforced Al-5% Mg alloy matrix composites |
| V. S. Srinivasan | Sastry D. H. & Bhanu Sankara Rao K. (IGCAR) | Strain controlled low cycle fatigue and creep-fatigue interaction behaviour of a type 316L(N) stainless steel |
| R. Venkatesan | Dwarakadasa E. S. and Ravindran M. (NIOI) | Studies on corrosion of some structural materials in deep sea environment |
| Sandip Bysakh | Kamanio Chattopadhyay & Das P. K. (IPC) | Pulsed laser ablation deposition of intermetallic thin films: A study of evolution of metastable phases and ultrafine microstructures |
| Ashutosh Suresh Gandhi | Vikram Jayaram | The processing of bulk metastable amorphous and nanocrystalline ZrO2-Al2O3 ceramics by pressure consolidation of amrophous powders |
| Divakar R. | Ranganathan S. & Raghunathan V. S. (IGCAR) | Interfaces in quasicrystalline and nanocrystalline materials: quasicrystalline, Al-Cu-Fe and Al-Pd-Mn alloys and nanocrystalline titanium, palladium and thorium dioxide |
2000-1991
2000
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Srinivasa Rao B. | Vikram Jayaram | Pressureless infiltration of Al-Mg based alloys into Al2O3 preforms |
| Sankarasubramanian R. | Abinandanan T. A. | Symmetry breaking transitions in equilibrium shapes of coherent precipitates |
1999
| Student | Advisor(s) | Thesis title |
|---|---|---|
| S. Prakash Narayan | Vikram Jayaram & Kunal Basu (RRL, Bhopal) | The effect of strain rate and temperature on the development of magnetic properties in nanocrystalline Nd-Fe-B alloy |
| Rajendra Kumar Rath | Subramanian S. | Polysaccharide-based investigations into the surface chemistry of some sulphide and hydrophobic minerals and processing of a complex sulphide ore |
| Kinkar Laha (ER) | Sastry D. H. & S. L. Mannan (IGCAR) | Tensile and creep behaviour of similar and dissimilar weld joints of Cr-Mo steels |
| M. Divakar | J. P. Hajra & Jacob K. T. | Thermodynamics of surfaces and adsorption in dilute iron based systems |
| Dheepa Srinivasan | Kamanio Chattopadhyay | Phase evolution, thermal stability and hardness of melt spun nanocrystalline Al-Zr based alloys |
| S. Sundararajan | Dwarakadasa E. S. & R. Mahadevan (IPL) | Study of the properties and particle or matrix interface in Al-12Si-10%SiCp composite |
1998
| Student | Advisor(s) | Thesis title |
|---|---|---|
| N. Nagendra | Vikram Jayaram | Processing, microstructure and fracture characteristics of high volume fraction (Al2O3/Al-AlN) matrix composites |
| P. K. Sagar (ER) | Prasad Y. V. R. K. & Dipankar Banerjee | High temperature deformation processing of a 2/O titanium aluminide alloys using processing maps |
| T. Seshacharyulu | Prasad Y. V. R. K. | Influence of oxygen content, crystallographic texture and preform microstructure on the processing maps for hot working of titanium and Ti-6Al-4V. |
| N. B. R. Mohan Rao (QIP) | Surappa M. K. | Studies on precipitation, recrystallization and deformation behaviour of ceramic particle reinforced Al-10% Mg alloy composites |
| R. Jayaganthan | Hajra J. P. | Experimental investigations and thermodynamic modelling of selected III-V semiconductor alloys |
| N. Ravi Shankar | Kamanio Chattopadhyay | Mechanisms of phase formation and magnetic properties of nano-crystalline materials |
| G. Chandra Mohan (QIP) | Dwarakadasa E. S. | Extrusion processing of Al-Li alloy (1441) |
| Namita Deo | Natarajan K. A. | Studies on biobeneficiation and bioremediation using Bacillus polymyxa with reference to iron ore and bauxite processing |
| R.S. Sundar | Sastry D. H. | Processing and creep studies on Fe3Al based alloys |
| Yu Fuxiao (FN) | Dwarakadasa E. S. & Ranganathan S. | Development of liquid phase co-spray forming and its application to Al-Si-Pb alloys |
| Azharul Haq (ER) | Dwarakadasa E. S. & S. Banerjee (BARC) | Near threshold fatigue crack growth and fracture toughness studies in zirconium, Zr-15% Ti and zircaloy-2 |
| Tania Bhatia | Kamanio Chattopadhyay & Vikram Jayaram | Phase evolution in MgO-MgAl2O4 under non-equilibrium processing conditions |
1997
| Student | Advisor(s) | Thesis title | |
|---|---|---|---|
| K. V. Sudhakar | Dwarakadasa E. S. | Crack growth, fracture and fracture toughness behaviour of a dual phase martensite steel | |
| K. S. N. Murthy | Dwarakadasa E. S. | Influence of metal cations (Cu2+Al3+ and Li+) on the aqueous corrosion of an Al-Li alloy | |
| Dinesh Srivastava | Ranganathan S. & Srikumar Banerjee (BARC) | Phase transformations in zirconium based alloys | |
| Sukanya Mukhopadhyay | Jacob K. T. & A. K. Shukla (SSCU) | Studies on phase relations, thermodynamics and electrochemistry of | some ceramic oxide systems |
| N. N. Viswanathan | Lahiri A. K. & M. N. Srinivasan (ME) | Modelling of Cupola – Design and operation for minimum fuel rate and emission levels |
1996
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Bhaskar Majumdar | Kamanio Chattopadhyay & Hajra J. P. | Thermodynamics and microstructural development in immiscible systems processed through different routes |
| Dharmendra Gupta | Lahiri A. K. | Water model study of fluid flow and slag enetrainment in a continuous slab casting mold |
| S. Manjini | Ranganathan S. & G. N. K. Iyengar | Studies on high Tc YBa2Cu3O6+x: stability, silver addition and thin films |
| K. M. Satyalakshmi | Mallya R. M. & M. S. Hegde (SSCU) | Studies on superconducting, metallic and ferroelectric oxide thin films and their heterostructures grown by pulsed laser |
| Rajan Ambat | Dwarakadasa E. S. | Aqueous corrosion and high temperature oxidation studies of aluminium-lithium alloys |
| A. K. Srivastava | Ranganathan S. | Studies on rapidly solidified Al-Mn-Cr-Si and Al-Fe-V-Si alloy : Processing – Microstructure correlation |
| N. V. Ravi Kumar | Dwarakadasa E. S. | Characterization of indigeneous Al-Zn-Mg.SiCp metal matrix composites |
| T. R. G. Kutty | Sastry D. H. & Ganguly C. (BARC) | Microstructure, hot hardness and indentation creep of Al-U & Al-U-Zr alloys |
| Bhaskar Dutta | Surappa M. K. | Studies on particle distribution and matrix microstructure evolution during processing of Al-Cu-SiCp composites |
1995
| Student | Advisor(s) | Thesis title |
|---|---|---|
| D. K. Bhattacharya | Dwarakadasa E. S. & Placid Rodriguez (IGCAR) | Characterization of microstructures in steels by magnetic and ultrasonic techniques |
| T. V. L. Narasimha Rao | Sastry D. H. & M. V. Bhat | Aqueous corrosion and a fracture mechanics study of stress corrosion cracking in magnesium alloys (Mg-Li-Al; Mg-Li-Al-X and Mg-Zn-Mn) |
| T. Chandrasekaran | Kishore | Kinetics of size reduction and associated wear of grinding media – study using a ball mill |
| D. N. Drakshayani | Mallya R. M. | Reactivity of Solids : Effect of dopants on the low temperature hydrogen reduction of ferric oxides and metastable spinels |
| O. Sivakesavam | Prasad Y. V. R. K., P. Rama Rao & G. G. Saha (DMRL) | Effect of processing history and initial microstructure on the hot working behaviour of magnesium, Mg-Zn-Mn, Mg-Li-Al and Mg-Li-Al-Zr Alloys : Characterisation with processing maps. |
| K. Padmanabhan | Kishore | Failure analysis of glass, carbon or kevlar fibre reinforced epoxy based composites in static loading conditions. |
| K. Asokkumar | K. S. Raman and M. N. Chandrasekharaiah (WRI) | Studies on induction pressure welded steel joints |
| R. Nagarajan | Kamanio Chattopadhyay and Ranganathan S. | Metastable and nanostructured titanium-nickel and titanium- nickel-aluminium alloys |
1994
| Student | Advisor(s) | Thesis title |
|---|---|---|
| N. Srinivasan | Prasad Y. V. R. K. | Influence of impurities and alloying additions on the processing maps for hot working of nickel and nickel-base superalloys Ni, Ni-C, Ni-C-S, Ni-20Cr, IN 600, IN 718, Nimonic-75, 80A and 90 |
| Alok Singh | Ranganathan S. | Decagonal quasicrystals and related phases in aluminium- transition metal alloys : Al-Mn-Fe, Ni, Cu, Zn |
| Ramasis Goswami | Kamanio Chattopadhyay | Microstructures, solidification, melting and transport properties of nanodispersoids in immiscible alloy systems |
| Tom Mathews | Jacob K. T. & Hajra J. P. | Phase equilibria and thermodynamic studies on selected ceramic oxide systems |
| S. Murali | K. S. Raman & K. S. S. Murthy (ME) | Influence of trace additions on the microstructure, mechanical properties and age hardening characteristics of Al-7Si-0.3 Mg cast alloy with iron impurity |
1993
| Student | Advisor(s) | Thesis title |
|---|---|---|
| D. Padmavardhani | Prasad Y. V. R. K. | Influence of the constitutive behaviour of a and ß phases on the mechanisms of hot working in a – b brasses and nickel silvers: A study using processing maps |
| J. K. Chakravartty | Prasad Y. V. R. K., M. K. Asundi and S. Banerjee (BARC) | Optimization of hot workability and control of microstructure in zirconium alloys using processing maps : Zirconium, Zircalloy-2, Zr-2.5Nb and Zr-2.5 Nb-0.5 Cu |
1992
| Student | Advisor(s) | Thesis title |
|---|---|---|
| K. Raviprasad | Kamanio Chattopadhyay | Microstrucutral evolution during ordering and magnetic properties of rapidly solidified Fe-Si alloys |
| M. Valsan | Sastry D. H. & S.L. Mannan (IGCAR) | Some aspects of deformation and fracture in low cycle fatigue of a nimonic PE 16 superalloy |
| N. Ravichandran | Prasad Y. V. R. K. | Effect of impurities and hard particles on the characteristics of dynamic recrystallization during hot working of aluminium and copper –A study using processing maps |
| B. S. Murty | Ranganathan S. & M. Mohan Rao | Study of amorphous phase formation by mechanical alloying in Ti based systems |
1991
| Student | Advisor(s) | Thesis title |
|---|---|---|
| R. Seshadri | Mallya R. M. & R. V. Krishnan (NAL) | Centrifugal splat quenching and secondary atomization of titanium alloys (Ti-6Ai-4V & Ti-6.5Al-3.3Mo-1.6Zr-0.3S) |
1990-1981
1990
| Student | Advisor(s) | Thesis title |
|---|---|---|
| N. K. Mukhopadhyay | Ranganathan S. and Kamanio Chattopadhyay | Some aspects of synthesis, structure and stability of quasicrystals |
| R. L. Saha | Jacob K. T. and P. Rama Rao (DMRL) | Casting technology for titanium and titanium alloys characterisation of metal mould reactions in zircon sand and investment moulds and evaluation of a hypo-eutectic cast Ti-Si alloy |
| V. Sampath | Dwarakadasa E. S. | Electroslag refining and structure property correlation studies of the aluminium alloy IS:7670 |
| S. Srikanth | Jacob K. T. | Thermodynamics of alloys: Theory, experiment and application |
| D. Sundararaman | Ranganathan S. & V. S. Raghunathan (IGCAR) | Phase tranformation in Ti-N and Ti-Fe-N alloys and superconductivity |
| M. K. Yelloji Rao | Natarajan K. A. | Electrochemical aspects of interactions among ball materials and minerals with reference to grinding and flotation of complex copper lead-zinc sulphides |
| Baldev Raj | Ranganathan S., P. Rodriguez (IGCAR) & A.K.Rao (AE) | Acoustic emission for characterising, deformation and fracture during tensile testing in austenitic stainless steels |
| G. M. Kale | Jacob K. T. & G. N. K. Iyengar | Thermodynamic studies on selected ceramic oxide systems |
| V. Thiruvenkataswamy | Ranganathan S. & Kamanio Chattopadhyay | Non equilibirum solidification of pure metals (Al, Cu, Ni), bismuth, eutectic Al-Ge and Al-Cu and peritectic Al-Cr alloys |
| T. A. Bhaskaran | Ranganathan S. & R. V. Krishnan (NAL) | Microstructural studies of rapidly solidified titanium eutectoid alloys |
1989
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Gouthama | Kishore | Electron microscopic study of precipitation in an Al-Ge alloy analysis using near-CSL/DSC lattice model |
| K. Rajendra Udupa | G. N. K. Iyengar & Sastry D. H. | Effect of electroslag re fining on composition, structure and mechanical properties of En 24 and MDN 250 steels |
| A. Rajadurai | Dwarakadasa E. S. | Effect of 1 wt% Al/Si addition on the phase transformation, tensile and fracture behaviour of Cu- 9Ni-6Sn spinodal alloy |
1988
| Student | Advisor(s) | Thesis title |
|---|---|---|
| M. N. Raghavendra Rao | Prasad Y. V. R. K., Kishore, B. Dattaguru (AE) & R. Peravali (ADE) | Non-destructive evalluation of crack like defects and delaminations in GFRP composites application of acousto-ultrasonics and acoustic emission techniques |
| Asok Kumar Ray | Dwarakadasa E. S. & K. S. Raman | Studies of fatigue crack growth and fracture toughness in LA55 HSLA steel butt welds |
| N. Thangaraj | Ranganathan S. & E. S. Raja Gopal (Phy) | Electron microscopy of quasicrystalline phases in aluminium-manganese and aluminium-palladium alloys |
| S. Ranganathan | Hajra J. P. | Themodynamic studies on Cr-Mn, Cr-Mn-O and Cr-Mn-Co systems using an isopiestic technique |
| R. Akila | Jacob K. T. & A. K. Shukla (SSCU) | Solid state galvanic sensors – Some studies on concepts and materials |
| K. S. Ravichandran | Dwarakadasa E. S. and Kishore | Microstructural aspects of near threshold fatigue crack growth and crack closure in HSLA steel and Ti-6Al-4V alloy |
1987
| Student | Advisor(s) | Thesis title |
|---|---|---|
| I. Sambasiva Rao | Prasad Y. V. R. K. & Dwarakadasa E. S. | Constitutive flow behaviour and processing maps for magnesium and magnesium -1.5 zirconium |
| T. Asokan | G. N. K. Iyengar & G. R. Nagabhushana (HVE) | Developmental studies on ZnO based composites for surge arrester applications |
| V. S. Raja | Ranganathan S. & Kishore | Thermal and chemical stabilities of three Fe-Ni base metallic glasses |
1986
| Student | Advisor(s) | Thesis title |
|---|---|---|
| S. Ramesh Babu | Lahiri A. K. & M. Mohan Rao | Studies on drop formation at conical and capillary tips |
| T. S. Sampath Kumar | Mallya R. M. & M. S. Hegde (SSCU) | Electron spectroscopic studies of surface segregation and oxidation of Cu and Ni based alloys and low temperaturepreparation and characterisation of intermetallics based on the system Fe-W-Mo |
1985
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Saradindukumar Ray | Sastry D. H. & P. Rodriguez (IGCAR) | Some aspects of the deformation characteristics of austenitic stainless steel 316 and high purity aluminium in tension, creep and stress relaxation |
| E. S. Bhagiradha Rao | Mallya R. M., Sastry D. H. & V. S. Arunachalam (DMRL) | Studies on mechanical alloying of Ni-20Cr-2ThO2 |
1984
| Student | Advisor(s) | Thesis title |
|---|---|---|
| R. K. Dayal | Prasad Y. V. R. K., M. V. Bhat & J. B. Gnanamurthy (IGCAR) | Effect of texture, grainsize and carbide precipitation on the crevice corrosion behaviour of austenitic stainless steels in acqueous medium: Metallurgical, chemical and electrochemical aspects |
| J. M. Juneja | K.P. Abraham & G. N. K. Iyengar | Themodynamic investigations on some alloy systems of interest in metallothermic reductions by vapour pressure: Measurements and thermogravimetry |
| R. Sundaresan | K. I. Vasu, Mallya R. M. & A. C. Raghuram (NAL) | Kinetics sintering in beta titanium systems: A model for enhanced diffusional mass flow by transformation induced dislocations during isothermal sintering of titanium and Ti-6Al-4V alloy |
| Prabhakar Sastri | Lahiri A. K. | Central atoms: Models for silicate and aluminate melts |
1983
| Student | Advisor(s) | Thesis title |
|---|---|---|
| A. M. Sriram Murthy | Prasad Y. V. R. K. & S. N. Tewari (DMRL) | Influence of microstructure on the deformation and fracture behaviour of a nickel-33% molydbenum-5.7% aluminium in situ composite |
| Ram Chandra Prasad | K. I. Vasu & Dwarakadasa E. S. | A fracture mechanics study of corrosion fatigue: Influence of microstructure on crack propagation rates in heat treated 7075Al clad aluminium alloy |
| M. Venkatraman | Hajra J. P. | Thermodynamics of Ni-Mn and Ni-Mn-Co alloys |
| P. C. Angelo | M. Mohan Rao & D. P. Lahiri (DMRL) | Ternary diffusion studies in iron-cobalt-vanadium alloys |
1982
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Sardari Lal Mannan | Prasad Y. V. R. K., K. I. Vasu & P. Rodriguez (IGCAR) | Influence of grain size on the flow and fracture in AISI Type 316 stainless steel at elevated temperature. |
| G. S. Murthy | Sastry D. H. | Impression creep and the mechanism of high temperature deformation in zinc and cadmium |
| P. K. Biswas | Dwarakadasa E. S. & P. K. Rohatgi | Influence of internal chills on the structure and properties of aluminium alloy castings |
| A. W. S. Kurny | Mallya R. M. & M. Mohan Rao | Studies on ion nitriding |
1981
| Student | Advisor(s) | Thesis title |
|---|---|---|
| M. V. Bhat | K. I. Vasu | Stress-corrosion characteristics of Al-5%Zn and Al-5%Cu alloys and effect of Ti addition |
| Srinivas D. Sastry | Prasad Y. V. R. K., K. P. Abraham & P.K. Rohatgi | Influence of microstructure on strengthening and fracture mechanisms in electroslag refined Fe-12Cr-6Al ferritic stainless steel |
| Anand Jagu Katkar | K. I. Vasu | Corrosion behaviour of nickel silver and cupro-nickel in sea water |
| G. Sambasiva Rao | Prasad Y. V. R. K. | Influence of texture on the grain boundary strengthening and fracture in hot rolled Mg and Mg alloys |
1980-1971
1980
| Student | Advisor(s) | Thesis title |
|---|---|---|
| H. V. Sudhaker Nayak | Prasad Y. V. R. K. & K. I. Vasu | Texture-dependent stress corrosion failure of commercial titanium and Ti-6Al-4V alloy sheets in methanol bromine solution |
| J. Subrahmanyam | K. P. Abraham & Lahiri A. K. | Chemical vapour deposition of titanium carbide from titanium tetrachloride-toluene-hydrogen gas mixtures |
| Mohan G. Hebsur | Prasad Y. V. R. K. & K. P. Abraham | Effect of electroslag refining on hot workability, fracture toughness and fatigue crack propagation in EN24 and EN52 steels |
1979
| Student | Advisor(s) | Thesis title |
|---|---|---|
| D. Banerjee | K. I. Vasu | Phase equilibria and transformations : A microstructural characteri-sation of some Ti-Al-Mo alloys containing the g – phase |
| N. Jayaraman | M. Mohan Rao | Studies on maraging and reversion to austenite in Fe-12Ni-4Mn maraging steel |
| A. H. Yegneswaran | K. S. Raman | Effect of crystallographic texture and grain size on the mechanical properties of warm worked Cd, Cd-1.5Zn and Cd-1Ag alloys |
| S. Ilangovan | K. I. Vasu | Galvanic cementation winning of copper from chalcopyrite leached with ferric chloride solution |
| Deonath | P. K. Rohatgi | Preparation and properties of cast aluminium alloy-mica particle composite |
| N. K. Jain | Prasad Y. V. R. K. & K. P. Abraham | Hot working and deformation mechanism in electroslag refined materials (En 36A steel and RR 58 aluminium alloy) |
1977
| Student | Advisor(s) | Thesis title |
|---|---|---|
| A. K. Bhutani | K. P. Abraham | Studies on electroslag remelting |
| Ch. Virupaksha Shastry | Sastry D. H. & K. I. Vasu | Deformation characteristics of BCC metals |
| E. Elaya Perumal | K. I. Vasu & J. Balachandra | Stress corrosion cracking of Zr & zircaloy 2 in Ch3OH-(HCL, I2) solutions |
| S. Raghavan | G. N. K. Iyengar & K. P. Abraham | Thermodynamic investigations on binary metal oxide solutions by the solid electrolyte techniques |
| C. R. Vijayasimha | K. I. Vasu & V. G. Kubair (CH) | Heat transfer of liquid metals |
1976
| Student | Advisor(s) | Thesis title |
|---|---|---|
| T. Hanumantha Rao | K. I. Vasu | Oxide-dispersed copper nickel composites and kinetics |
| Uppala Ratnam | K. P. Abraham & Hajra J. P. | Studies on electroslag melting of quality steels and nickel base alloys |
| Placid Rodriguez | K. I. Vasu & M. K. Asundi (BARC) | Low temperature deformation in hard HCP metals |
| N. S. Srinivasan | Lahiri A. K. | Studies on the reduction of iron oxides by carbon |
| V. S. Raghunathan | K. I. Vasu & B. B. Sharma | Diffusion in transition metals alloys |
1975
| Student | Advisor(s) | Thesis title |
|---|---|---|
| T. C. Kasiviswanathan | K. I. Vasu | Corrosion and related electrochemical studies on zirconium (in nitrate melts, nitrate fluoride melts and aqueous nitrate solutions) |
| H. Ravindranath Shetty | Prasad Y. V. R. K. & K. I. Vasu | Superplasticity and stress corrosion cracking behaviour of zinc- aluminium and copper-aluminium alloys (effect of mechanical, metallurgical and environmental factors) |
| V. Sivan | G. N. K. Iyengar | Kinetic studies on gas solid reactions of metallurgical interest |
1974
| Student | Advisor(s) | Thesis title |
|---|---|---|
| V. V. V. N. S. Ramakrishna Rao | K. P. Abraham | Kinetic aspects of gas/solid reactions of metallurgical interest |
| Tarasankar Deb Roy | K. P. Abraham | Kinetic investigations on gas-solid reactions |
| Kishore | K. I. Vasu | On the nature of clustering and strengthening in a quenched and aged aluminium 2% germanium alloy-resistometric, microscopic and low temperature deformation studies. |
| R. Chandrashekar | K. I. Vasu | Stress corrosion of aluminium 8% magnesium alloy (effect of nature of stress, heat treatment and trace additions of B and Be) |
1972
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Y. M. Faruq Marikar | K. I. Vasu | Electrometallurgy of the iron group metals and alloys: Studies in the fluoborate bath |
| Krishna Kant Prasad | K. P. Abraham | Thermodynamic properties of some binary metal oxide systems |
| K. Narasimha Murthy | K. I. Vasu | Resistometric studies of precipitation kinetics in aluminium-silver alloys (Al-0.2 to 0.3 Ag alloys, and Al-0.64Ag alloy with Nb, Si, Ge, Ti, Gd, Sn or Pb) |
1971
| Student | Advisor(s) | Thesis title |
|---|---|---|
| K. S. Raman | K. I. Vasu | Resistometric studies of solute vacancy interactions and clustering kinetics in an FCC matrix (Al-Zn alloy with Ag, Co, Dy, Li, Nb, Pt, Sn, Y or Yb) |
| E. S. Dwarakadasa | K. I. Vasu | Resistometric studies of clustering and solute vacancy interactions in some aluminium alloys |
| D. H. Sastry | K. I. Vasu | Thermally activated deformation in CPH metals and the effect of crystal structure on the mechanism of low temperature creep in metals |
| Y. V. R. K. Prasad | K. I. Vasu | Effect of stacking fault energy, quenched-in defects and solute atoms on the low temperature deformation mechanism in FCC metals |
| S. Seetharaman | K. P. Abraham | Thermodynamic properties of some binary metal oxide solid solutions |
M. Tech.
2021- till date
2021
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Vinci Mojamdar M.Tech Research | Govind S Gupta | A study of gas flow in stationary and moving beds with lateral gas inlet |
2020-2011
2020
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Aditya Kumar | Praveen Kumar | Creep And Failure Of Ni-Based Alloy (In617) And T22 Steels (Pristine And Exposed) In Bending |
| Shamitha Sri M | Satyam Suwas | Tensile And Dwell Fatigue Behaviour Of Titanum Alloys |
| Apurba Roy | Kamanio Chattopadhyay & Rajeev Ranjan | Understanding the challenges in design and application of Co-Ni based superalloys - Discontinuous precipitation and Oxidation. |
| B.S.K. Gargeya | Abinandanan T.A | Phase Field Study of Spinodal Decomposition in Ternary Alloy Systems: Effects of Interfacial Energy, Mobility and Anisotropy |
| Mohammed Kamran Bhat | Atul H. Chokshi | Mechanical properties of pulsed electrodeposited nanocrystalline Ni-Mo alloys |
| Ajaj Rijal M.Tech Research | Praveen Kumar | Effect of High-Pressure Torsion and Natural Ageing on Hardness, Electrical Resistivity and Fatigue Properties of Commercially Pure Cu |
| Goutam Kumar Majhi M.Tech Research | Atul H. Chokshi | Processing, strength and conductivity could drawn Cu-Nb microcomposite wires |
2019
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Dinesh Singh M.Tech Research | Praveen Kumar | Application of Bending Tests for Evaluating Creep Behaviour of 12% Cr ferrite Steel used in Steam Turbine Blades |
| Shreehard Sahu | Vikram Jayaram | Experimental investigation of creep behaviour of IN617 under Flexural Load |
| Shubham Jain | Praveen Kumar | Effect of Electric Current and External Magnetic Field on Pre-Cracked Thin Metallic Foils |
| Nagur Shahidsha | Kaushik Chatterjee | Design and Characterization of Additively Manufactured Ti-6Al-4V Bone Plate |
| Ravi Kumar Singh | Abhick N Choudhury | OpenFOAM for Solving Material Science Problems |
| Abhilash Agnihotri | Ravi R & Praveen Kumar | Effect of electric current on whiskering in tin |
| Kayyam Sai Pranay Teja | G.S. Avadhani & Satyam Suwas | Development of high strength, wear and corrosion resistant steel for high speed rails and elastic clip |
| Somasish Bhowmick | Dipankar Banerjee | Modelling Grain Boundary nucleation |
| Arnab Chatterjee | Aloke Paul | Martensitic transformation of Platinum-Palladium modified β-Nickel Aluminide bond coat |
| Yadvendra | Abinandanan T.A | Quantitative phase-field modeling of coarsening in binary alloys for finite volume fraction |
| Chinmay Nitin Dahale | A.H. Chokshi | High temperature deformation behavior of titania doped alumina |
| Cherukupally Venkat Nikhil Kumar | Subho Dasgupta | Performance Comparison of ion-gel gated oxide FETs with competing printed electronics technologies |
| Saurabh Kumar | Suryasarathi Bose | Polymeric membranes anchored with polycations based antibacterial agents for water remediation |
| Sonu | Chandan Srivastava | Metal Graphene Composite Coatings- Morphology and Electrochemical Behavior |
| Samarjeet Kumar Singh | Rajeev Ranjan | Investigation of Structure-properties correlation in lead-free(1x)Na0.5Bi0.5TiO3-(x)Bi(Mg0.5Ti0.5)O3 |
2018
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Faizan Hijazi | Praveen Kumar | Bending Creep: Experimental Investigation of Creep in Beams Under Flexure |
| Priyanjali Markam | Chokshi A. H. | Creep Behaviour In Concentrated Solid Solution of Ni-Co Alloy |
| Sanket Kurli | Vikram Jayaram | Creep Studies Of Lead By Indentation |
| Manaswini Chinara | Dipankar Banerjee | Structure, Plasticity and Strength 0f Ti-5553 Alloy |
| Chandan Kumar | Abinandanan T. A. | Phase Field Study Of Precipitate Coarsening In Ternary Alloys |
| Vaskuri Chandra Sekhara Theja | Satyam Suwas & Avadhani G. S. | Mechanical Behavior 0f Medium Mn-Twip Steels for Automotive Applications |
| Pramod Kumar Singh | Satyam Suwas | The Effect Of Alloying Addition On The Microstructure and Mechanical Properties Of Ferritic-Pearlitic Steels And The Study Of Hot Deformation Behavior |
| Yogesh Kumar Bhandari | Subramanian S. | Beneficiation Of Chromite Ore By Flotation Studies |
| Natasha Prasad | Avadhani G. S. | Deformation And Recrystallization Behaviour Of High Entropy Alloy. |
| Kola Immanuel Raju | Kaushik Chatterjee | Characterisation Of 3d Printed 316l Stainless Steel For Biomedical Applications |
| Chavan Prasad M | Chandan Srivastava | Towards The Synthesis Of Graphene Foams By Powder Metallurgical Route |
| Jagadeshvaran P. L. | Suryasarathi Bose | Effects Of Graphene Oxide On Miscibility And Morphology Evolution Of Polymer Blends With Weak Dynamic Asymmetry |
| Sandeep Kumar Mondal | Subho Dasgupta | Effect Of Crystallite Size And Spatial Homogeneity On Channel Length Sensitivity Of Printed Oxide Thin Film Transistors |
| Sunil Kumar Behera | Subho Dasgupta | Inkjet Printed Amorphous Indium-Zinc-Oxide/Silver Hybrid Channel Thin Film Transistors |
| Daidi Surya Teja | Karthikeyan S. | High Strain Rate Plasticity And Damage Model Parameters For A Cast Austenitic Stainless Steel |
| Om Puri Gosain | Kamanio Chattopadhyay | Optimization Of Chromium And Titanium Content In Tungsten-Free Γ’- Strengthened Cobalt Based Superalloys For Thermo-Physico-Mechanical And Oxidation Properties |
| Shasanka Sekhar Behera | Suryasarathi Bose | Hybrid Grapheme Oxide Membranes Interlocked With Grapheme Oxide Quantum Dots For Effective Water Remediation |
2017
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ajaya Pratap Jena | Abhik N. Choudhury | Influence Of Interface Diffusion On Pearlite Growth: A Phase-Field Study |
| Ankita Dashrath Maske | Kamanio Chattopadhyay | Inkjet Printing Of Germanium Film Via Nanoparticle Ink Formations |
| Ankush Raina | Govind S. Gupta | Experimental Study Of Three Phase Flow In A Moving Bed With Lateral Gas Injection |
| Anshu Shankar Prasad | Aloke Paul | Effect Of Ti Addition On Tungsten Free Γ- Γ’ Co Based Superalloys |
| Priyanshi Agrawal | Chokshi A. H. | Mechanical Properties Of Electrodeposited Nanocrystalline Ni |
| Himanshu Singh | Satyam Suwas | Severe Plastic Deformation Of Al-Li-Cu Alloys By Accumulative Roll Bonding Arb |
| Mangesh Vyankat Pantawane | Ravi R. | Study On Effect Of Chromium Addition On Tungsten-Free Cobalt Based Superalloy |
| Gollapalli Prince | Surappa M. K. | Microstructure, Mechanical, And Damping Properties Of Magnesium AlloyAz91/Sicp/Fly Ash Hybrid Composite |
| Mridul Pant | Surappa M. K. | Wear Studies On Az91-3%Sicp-3%Fly Ash Magnesium Hybrid Composites |
| Anuj Dash | Chandan Srivastava | Heat Treatment And Hot Deformation Behaviour Of Nano Precipitate Strengthened Steels |
| Sarbajit Manna | Rajeev Ranjan | Photoluminescence Behavior Study Of Bismuth Ferrite-Lead Titanate Rare Earth Eu3+Er3+ Doped System With Particle Size Reduction |
| Bhavya Tulasi Aleti | Kaushik Chatterjee | Surface Nanocrystallization Of Cp- Titanium By Smat To Enhance The Corrosion- Fatigue Resistance And Biological Response For Orthopedic Applications |
| Mir Ishfaq | Subramanian S. | Bioleaching Of Chalcopyrite Ore By Using Acidithiobacillus Ferrooxidans |
| Pakhare Akshay Shailendra | Vijay Sethuraman | Electrochemical Hysteresis In Sno2 Electrode For Lithium Ion Batteries |
| Basavaraj P. Kalinganavar | Avadhani G. S. | The Effect Of Alloying Additions And Heat-Treatment On The Mechanical Properties Of Nano-Pearlitic Steel And Optimization Of Hot Workability By Developing A Processing Map |
| Shubham Netam | Chandan Srivastava | Morphology ,Microstructure And Electrochemical Corrosion Behaviour Of Zn And Zn-Graphene Oxide Nanocomposite Coatings Electrodeposited On Mild Steel |
| Sneha Pandurang Patil | Suryasarathi Bose | Development Of Efficient Emi Shielding Material Using Pvdf, Alloyed Nanoparticles And Carbon Nanotubes |
| Harish Kumar S. | Ashok M. Raichur | Improving The Mechanical And Thermal Properties Of Epoxy Nanocomposites Using Graphene Oxide Go |
| Soudip Basu | Praveen Kumar | A Critical Examination Of Mechanical And Actuation Behavior Of Carbon Nanotube And Reduced Graphene Oxide Foams Under electric Fields |
| Saurabh Kesarwani | Karthikeyan S. | Constitutive Equations For Plasticity And Fracture Inductile Metals Under High Strain Rates |
| Soham Chattopadhyay | Rajeev Ranjan | Ab-Initio Investigation Of Van Der Waals Heterostructures Of Polar Sc2co2 Mxene With Mose2 And Wse2 Transition Metal Dichalcogenides |
| Rathod Hemant Janardhan | Ramamurty U. | Mechanical And Tribological Properties Of Selective Laser Melted Alloy |
| Abhijeet Nayak | Abinandanan T. A. | Effect Of Finite Precipitate Volume Fraction On The Coarsening Behavior : A Phase Field Study |
| Ayyaluru Tulasi Shashidhar Reddy | Praveen C. Ramamurthy | Silicon Hybrid Molecular Electronic Devices Based on Porphyrin |
2016
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Pramod Kumar Sharma | Abinandanan T. A. | A Phase-Field Model For Simulating Pitting Corrosion |
| Supriyo Chakraborty | Abhik N. Chowdhury | Phase Field Study Of The Electric Current Induced Void Evolution And Grain-Boundary Grooving |
| Indrani Biswas | Karthikeyan S. | Design And Experimental Validation Of A Novel Ultra High Strength Steel For Landing Gear Applications |
| Bawane Kaustubh Krishna | Dipankar Banerjee | Microstructural Evolution And Tensile Properties Of Direct Metal Laser Sintered Dmls Cocrmo And Direct Metal Laser Deposited DmldFsx-414 Cobalt Based Superalloys |
| Patil Chaitali Shridhar | Kamanio Chattopadhyay | Study Of Precipitation Hardened Niobium-Silicon – Aluminium Alloys |
| Rakesh R. Kamath | Chokshi A. H. | Size-Effect Study On Mechanical Behaviour Of Niobium Micro-Wires |
| Antareep Sharma | Kaushik Chatterjee | Preparation And Characterization Of A Multifunctional Bioactive Surface On Titanium For Orthopedic Applications |
| Anwesha Kanjilal | Praveen Kumar | Mechanical Reliability Of Pb-Free Solders And Solder Joints |
| Rahul G. R. | Vikram Jayaram | Dependence Of Crack Velocity On Stress Intensity Factor In Pmma Using Single Edge Notched Clamped Beams |
| Prachi Pragnya | Vijay Sethuraman | Study Of Aluminium As A Potential Negative Electrode For Lithium Ion Batteries |
| Urvashi Bothra | Praveen C. Ramamurthy | Fabrication Of Organic Solar Cells On Flexible Glass |
| Abhishek Agarwal | Rajeev Ranjan | Effect Of Poling On Photoluminescence, Structural And Electrical Properties Of Erbium Doped Na0.5bi0.5tio3 And 0.94na0.5bi0.5tio3-0.06batio3 |
| Bachu Saiphaneendra | Chandan Srivastava | Synthesis And Characterization Of Graphene – Nanoparticle Composites For Environmental And Catalytic Applications |
| Subhash Kumar | Satyam Suwas | Study Of Texture And Microstructure Evolution During High Temperature – High Strain Rate Deformation Of hcp Materials |
| Awadh Kishor Gupta | Satyam Suwas & Avadhani G. S. | Effect Of Alloying Addition On Interlamellar Spacing In Pearlitic Grade Steel |
2015
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Akash Ashis Bhattacharjee | Abhik N. Choudhury | Phase Field Modelling Of Mode Iii Dynamic Fracture |
| Arunima Banerjee | Dipankar Banerjee | Deformation And Analysis Of Slip In Ti-6al-2sn-4zr-2mo-0.1si And Ti-6al-2sn-4zr-6mo |
| Manoj Kumar Yadav | Chokshi A. H. | High Temperature Deformation Behavior Of Lutetium Doped Alumina |
| Nikki Ramesh Kamble | Avadhani G. S. & Satyam Suwas | Hot Deformation Processing Of Magnesium Alloys, Am30 And Am50 |
| Pund Tushar Shivaji | Satyam Suwas | Processing-Microstructure-Property Correlation In Low Density Steels, Aisi 1040 Steel And Pearlitic Steel |
| Pushpendra Singh | Subodh Kumar | Development Of Wrought Mg-Sn-Zn Alloys With Improved Strength And Ductility |
| Rishi Ramdas Shivhare | Praveen C. Ramamurthy | Comparative Analysis Of Ageing Induced Performance Degradation Between P-I-N And N-I-P Structured Organic Solar Cells |
| Rohit Berlia | Chandan Srivastava | Synthesis And Characterization Of Isolated Nano-Solids And Nano –Structured Coatings |
| Sawant Amitkumar Shripati | Kamanio Chattopadhyay | Effect Of Alloying Additions On Newly Developed Tungsten Free Cobalt Based Superalloy |
| Shankha Nag | Ramamurty U. | Micromechanics And Deformation Behaviour Of Amorphous Systems |
| Shobhit Pratap Singh | Praveen Kumar | Creep Behavior Of Lif Single Crystal And Cu-Bi Alloy |
| Subodh Nath Patel | Vikram Jayaram | Controlled Growth Of Thick And Porous Anodic Zro2 Coatings At Low Temperature |
| Surya Vanamali | Ashok M. Raichur | Arginine Functionalized Mesoporous Silica Nanoparticles As Intravenous Delivery System To Target Intracellular Salmonella Infection |
| Urbi Pal | Aloke Paul | Effect Of Al And Cr On The Interdiffusion Between Β-Fe, NiCral Bond Coats And P91 Steel & Ni-Based Cmsx-4 Superalloy |
| Abhijeet Nandkishor Kalaskar | Rajeev Ranjan | Effect Of Poling On Dielectric Properties And Photoluminescence Spectrum Of Europium Doped Na0.5bi0.5tio3 And 0.94na0.5bi0.5tio3-0.06batio3 |
2014
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Abhishek Goswami | Chokshi A. H. | Structural And Mechanical Studies On Sea Shells |
| Amardeep Kumar Burnwal | Subodh Kumar | A Processing Route To Improve The Strength And Ductility Of 2219scmg Aluminium Alloy |
| Anupam Mishra | Kaushik Chatterjee | Polycaprolactone/Organoclay Nanocomposites: Mechanical |
| Binay Kumar Deb Barman | Praveen Kumar | Mechanical Behaviour Of Bi-Cu Alloy: A Two-Phase Material Suited For Thermal Surge And Energy Storage Applications |
| Chandan Kumar | Kamanio Chattopadhyay | Synthesis And Phase Transformation Behavior Of Materials At Nano Scale |
| Gangineni Pavan Kumar | Praveen C. Ramamurthy | Current Soaking Studies Of Organic Electronic Devices |
| Kadambi Sourabh Bhagwan | Ramamurty U. | Indentation Studies On Tilted Copper Samples And Ni-Ti Shape Memory Alloys |
| Kashiwar Ankush Arun | Dipankar Banerjee | 3d Microstructural Characterization In Some Alloys Using Serial Sectioning Techniques |
| Muhammad Arif | Govind S. Gupta | Mathematical Modelling Of Iron Ore Sintering Process |
| Mahander Pratap Singh | Chandan Srivastava | Electrodeposition And Characterization Of Nanowires: Ag, Ag-Co, Ag-Fe, Ag-Co-Ni, Ag-Ni-Fe And Ag-Nio Nanowires |
| Pattabhi Ramaiah Kola | Suryasarathi Bose | Emi Shielding In Pc/San Blends With Mwnts And Dopamine Decorated Fe3o4 Nanoparticles |
| Pusuluri Srimannarayana | Karthikeyan S. | Phase Field Modelling Of Suzuki Strengthening In Pseudo-Binary Ni3Al,Ti System |
| Shyamal Nayak | Subramanian S. | Studies On The Recovery Of Uranium, Niobium And Rare Earth Elements From A Lean Grade Ore |
| Subrata Panda | Avadhani G. S. & Satyam Suwas | Microstructure, Texture And Mechanical Properties In Metastable Beta Titanium Alloy Ti-5553 |
| Sudipta Pramanik | Satyam Suwas | Development Of Low Density Steels And Their Processing-Texture-Property Relationship |
| Sukriti Manna | Abinandanan T. A. | Stress Effects On Composition Profile Of Ordered Precipitates: A Phase Field Study |
| Tanaji Paul | Aloke Paul | Interdiffusion Studies In Ni-Zr And Mcraly – Cmsx4 Systems |
| Senthil Kumar Nadar | Ashok M. Raichur | Control Of Size, Shape And Crystallographic Phase Of Calcium Carbonate Particles |
2013
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Agepati Srinivasa | Chokshi A. H. | Mechanical Behavior Of Nickel Microwires |
| Vishal N. Soni | Karthikeyan S. | Effect Of Texture On High Strain Rate Deformation Of Ti 6al-4v |
| Avishek Kumar | Praveen C. Ramamurthy | Structure Property Relationship Of Polymers For Organic Electronics |
| Md. Dilkash Azam | Kaushik Chatterjee | -Caprolactone-Graphene BasedPoly Nanocomposite For Bone Tissue Engineering |
| Poshit Nagmandali | Satyam Suwas | Orientation, Intrinsic Stresses And Dielectric Properties Of Yttria Stabilized Zirconia And Barium Strontium Titanate |
| Arnab Mukherjee | Abinandanan T. A. | Phase Separation In Polymer Blends With Fillers : A Phase Field Study |
| Sandeep Vura | Rajeev Ranjan | Structure And Magnetic Characterization Of 1-X Bifeo3- X Srtio3 Bulk And Thin Film Ceramics |
| Rajesh Kumar Rai | Chandan Srivastava | Synthesis And Characterization Of Ag-Ni Nanowires |
| Manvendra Kumar Singh | Subodh Kumar | Tensile Properties And Corrosion Behaviour Of Mg-Li-Zn Alloys |
| Tarang Mungole | Praveen Kumar | A Mechanistic View Behind Development Of Microstructure And Mechanical behaviour During High Pressure Torsion On Cast Al-7 % Si Alloys |
| Sarfaraj Islam | Ravi R. & Aloke Paul | The Phase Evolution In AuCu/Sn System By Solid State Reactive Diffusion And Diffusion Studies In CuNi/Sn |
| Sahithya Kandalam | Avadhani G. S. & Satyam Suwas | Processing- Microstructure- Property Correlation In We43 Alloy |
| Bhingardive Viraj Vishnu | Subramanian S. & Narayana B. V. | Studies On The Recovery Of Uranium, Niobium And Ree From A Lean Grade Ore. |
| Madhawan Chandra Wanshi | Kamanio Chattopadhyay | Development Of Al-Cu-V-Zr Alloy For High Temperature Applications |
| Suraj Kumar Das | Vikram Jayaram | Electrolytic Oxidation Of Zirconium To Produce Thick Porous Zirconia Film |
| Rajesh Kumar Prusty | Ramamurty U. | Nanoindentation Of Ni-Gyroids |
2012
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Bhaskar Sravan Vadlamani | Rajeev Ranjan | Structural, Dielectric And Ferroelectric Studies In 1-XBiMg0.5ti0.5O3-XPbzro3 Systems |
| Harini R. | Subramanian S. | Remediation Of Arsenic Form Aqueous Solutions |
| Prince Raj | Govind S. Gupta | Optimisation Of Temperature For The Production Of Silicon Carbide Via Carbothermal Route |
| Prafull Pandey | Kamanio Chattopadhyay | Effects Of Minute Additions Of Ternary Elements Ni, Cu And Fe On The Morphology And Solidification Behavior Of The Sn-Zn Eutectic Alloy |
| Deepak Kumar Mishra | Praveen C. Ramamurthy | Fabrication Of Metal Electrodes For Organic Electronic Devices |
| Nachiketa Ray | Stayam Suwas | Response To Shock Wave Deformation In Aa5086 Aluminium Alloy |
| Kamal Nayan Goswami | Dipankar Banerjee | A First Principles Study Of The Effect Of Composition On Lattice Parameters In Ni-Base Superalloys |
| Subham Mridha | Karthikeyan S. | A First Principles Study Of The Effect Of Alloying On Slip In Magnesium |
| Nilesh Hansraj Warthi | Chokshi A. H. | Strength In Nickel Microwaves |
| Santosh Kumar | Narayana B. V. & Subramanian S. | Studies On The Dissolution Of Uranium From A Syenite Ore |
| Brij Mohan Mundotiya | Chandan Srivastava | Phases And Morphologies In Electodeposited Ag-Ni Film And Nano- Sized Particles |
| Krishna Kumar | Ashok M. Raichur | Synthesis Of Stable Nano Zero Valent Iron Nzvi Particles And Application For Environmental Remediation |
| Prakash Sarkar | Ashok M. Raichur | Preparation And Mechanical Properties Of Nanoparticle Embedded Polymer Films |
| Varun Arvind Baheti | Aloke Paul & Ravi R. | Interdiffusion Stuidesin Binary Co-Ta System And Ternary CoNi-Ta, CoNi-Nb And Fe Ni-Nb Systems |
| Zita Zachariah | Ramamurty U. | Effect Of State Of Stress On Deformation Mechanisms In The Magnesium Alloy Am30 |
| Bibhudutta Mishra | Aloke Paul | Interdiffusion Study Of Systems Relevant To Microelectronic Industry |
| Shekhar Tapase | Satyam Suwas & Avadhani G. S. | Processing – Texture Relationship In Magnesium Alloy We 43 |
| Priyadarshi Behera | Subodh Kumar | Development Of Mg-Li Based Alloys With Improved Strength And Ductility |
| Kumar Navin | Vikram Jayaram | Fabrication And Characterization Of Zirconia Nanotubes On Zirconium Substrage For Thermal Barrier Coating Application Eb-Pvd By Chemical Route |
| Supriyo Ghosh | Abinandanan T. A. | Effect Of Particles On Spinodal Decomposition: A Phase Filed Study |
| Vinay Patel | Abinandanan T. A. | Computational Thermodynamics Of Point Defects In L12-Ordered Intermetallic Material g’-Ni3al |
2011
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Debashish Das | Chokshi A. H. | Electrodeposited Nano And Electropolished Micro Nickel Wires: Synthesis And Mechanical Properties |
| Shikhar | Chokshi A. H. | High Temperature Deformation Study Of Ultra Fine Grained Nickel |
| Joshi Sri Raghunath | Karthikeyan S. | Factors Affecting Extension Twinning In Magnesium Alloys |
| Pikee Priya | Karthikeyan S. | A First Principles Study Of Al3sc1-Xzrxtype Precipitates In Al Alloys |
| Dharm Jeet Gavel | Subramanian S. | Effect Of Particle Size On Flotation |
| Sajal Hatwal | Satyam Suwas | Effect Of Severe Plastic Deformation On Microstructure, Texture And Mechanical Properties Of Pearlitic Steel |
| Aviral Madhup | Rajeev Ranjan | Processing – Texture – Property Relationship In Some Wrought Mg-Alloys Processed By The Principle Of Accumulative Roll Bonding |
| Arka Lahiri | Abinandanan T. A. | Spinodal Decomposition In Epitaxially Grown Thin Films |
| Joshi Chairanya Amol | Abinandanan T. A. | Phase Field Modeling Of Discontinuous Spinodal Decomposition |
| Shamiparna Das | Rajeev Ranjan | Search For High Curie Temperature Piezoelectric Solid Solution |
| Manjesh Kumar Singh | Vikram Jayaram | Simulation And Validation Of Roll-Separating Force And Limiting Reduction In Cold Rolling |
| Haider Ali | Vikram Jayarm | Nickel – Kaolin Composite Coatings For Self-Lubrication |
| Abir Bhattacharya | Ramamurty U. | Strain Rate Sensitivity Of A Bulk Metallic Glass In Different Structural States And At Different Temperatures |
| Prince Shaival Singh | Ramamurty U. | Effect Of Processing Routes, Strain Rate And Temperature On Mechanical Properties Of Bulk Metallic Glass Composites |
| Jai Prakash | Kamanio Chattopadhyay | Study Of Sliding Friction Induced Subsurface Deformation Of Crystalline Al And Quasicrystalline Al65cu15co20 Material |
| Kundan Kumar | Kamanio Chattopadhyay | Study Of Microstructures And Oxidation Behaviour Of Ni-14a1-10zr Ternary Alloy |
| Manu S. Mohan | Subodh Kumar | Development Of Mg-Si Based Cast Alloys With Improved Strength |
| Sambit Bapari | Subodh Kumar | Optimization Of Processing Routes For 2219scmg Developed For High Temperature Applications |
| Avik Mondal | Aloke Paul | Interdiffusion Study In Fe-Pt System |
| Mishra Sumeet Ravishankar | Praveen C. Ramamurthy | Organic Device Architecturing By Electrospinning Of Conducting Polymers |
| Monalisa Bai | Praveen C. Ramamurthy | Structural Characterization Of Electroactive Organic Crystals For Photovoltaic Application |
| Sanghita Mridha | Dipankar Banerjee | Characterization Of Cast Ni Based Superalloy |
| Sajid Hussain M. D. | Dipankar Banerjee | Globularization Of A Near Α Titanium Alloy |
2010-2001
2010
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Aravinda Raja A. | Abinandanan T. A. | Grain Growth in a System With Anisotropic Grain Boundary Mobility: A Monte Carlo Study |
| Ashwin N. K. Jayaraman | Ramamurty U. | Orientation Dependence of Mechanical Properties in Ferromagnetic Shape Memory Alloy NiMnGa |
| Hariprasad G. | Chokshi A. H. | A study of the indentation mechanical response of abalone nacre and the effect of the organic phase on its deformation across different length scales |
| Sangeeta Santra | Aloke Paul | Studies on Growth Mechanism of Nb3Sn Superconductors |
| Agrawal Priyanka Kantibhai | Karthikeyan S. | Effect of Boron Addition on Microstructure and Mechanical Properties of Cast Ti-6Al-4V alloy |
| Proloy Nandi | Kamanio Chattopadhyay | Effect of Ni addition to rapidly solidified Al-Sc binary alloy - A study of Microstructural evolution and Mechanical Properties |
| G. Praveen | Subodh Kumar | Effect of Addition of Sc and mg to 2219 Al alloy |
| Pankaj Kumar | Satyam Suwas | Processing-Microstructure-Texture relationship in Interstitial Free I F steel, Pearlitic steel and Twin Induced Plasticity TWIP steel |
| K. Mageshwari | Abinandanan T. A. | Phase Field Study of Solute Drag Effects on Grain Growth |
| G. Kannan | Satyam Suwas | Processing – Microstructure – Property Relationship in Mg/SiCp and AZ91/SiCp Composites |
| Anindya Roy | Vikram Jayaram | Oxidation Behaviour of ZrCx-ZrB2-SiC Ultra High Temperature Ceramics |
| Nondo Doka | Govind S. Gupta | Determination of Temperature and Time for the Processing of Boron Carbide Through Carbothermal Route |
| P. Arun Dinesh | Satyam Suwas | Accumulative Roll Bonding of Similar and Dissimilar A1/Zn/Mg |
| Appala Raju Kaki | Rajeev Ranjan | Structure and Phase Transition of 1-x BiFeO3-xPbTiO3 and 1-xBiFeO3-xPbTi 1-yZryO3 |
| Deepa J. | Subramanian S. | Bioremediation of Copper and Zinc |
| Rama Krishnan R. | Praveen C. Ramamurthy | Simulating Polymers For Best Encapsulant Materials |
| Bidhan Chandra Mondal | Subodh Kumar | Effect of Plasma Electrolytic Oxidation Coatings and laser Surface Alloying on Microstructure and Wear of MRI 230D Magnesium Alloy |
| Agnish Ghosh | Subramanian S. | Studies on Bioremediation of Chromium |
2009
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Appa Rao Chintha | Abinandanan T. A. | Grain Growth with Different Types of Grain Boundaries A : Monte Carlo Study |
| Ambresha B. | Ashok M. Raichur | Studies on Colloidal Stability of Hematite in the Presence of Biosurfactant |
| Ashutosh Jangde | Surappa M. K. | Synthesis and Recrystallization Study of AA5182/Al2O3 nanocomposite |
| K. Ajay Kumar | Rajeev Ranjan | Synthesis and Characterization of BiA103x-PbTiO31-x and Pb1-xPrxTiO |
| K. Boopathy | Ramamurty U. | Fatigue Crack Growth Behavior in BMG Matrix Composites and Effect of Ion Implantation on Mechanical Behavior of as Cast BMG |
| Ganesh Kumar K | Subramanian S. | Electro co – deposition of nickel – nano Al2o3 composite coatings on aluminum and study of their wear properties |
| Kundanati Lakshminath | Subodh Kumar | Characterization of Plasma Electrolytic Oxidation coatings on AM50 magnesium alloy based on phosphate electrolyte |
| Nachiappan Chidambaram | Vikram Jayaram | Effect of non-stoichiometry on the densification behavior of reactively processed ZrC and its composite |
| Maya Kini K. | Chokshi A. H. | High temperature deformation behaviour of titania doped 3 mol% yattria stabilized tetragonal zirconia |
| Subhasis Sinha | Satyam Suwas | Grain Boundary Engineering of Modified Super – 304H Austenitic Steel |
| Somasurendra Kumar Balam | Aloke Paul | Interdiffusion studies in Co-Nb and Fe-Nb systems |
| Vetrivendan E. | Kamanio Chattopadhyay | Microstructure and Mechanical properties correlation study of rapidly solidified Zn-Al-Cu and Al-Cu-Si ternary eutectic alloys |
| Vamsi K. V. | Karthikeyan S. | Stability of Ni3Al,Ti in Ordered Structures |
2008
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Adepalli Kiran Kumar | Aloke Paul | Study on interdiffusion and growth of Nb3Sn superconductor with A15 structure |
| Ayan Bhowmik | Satyam Suwas | Severe Plastic Deformation in Interstitial-free Steels |
| Badri Narayanan | Abinandanan T. A. | Microstructural Evolution in Alloy Thin Films |
| Chandrahas R. R. | Subramanian S. | Synthesis of Aluminum Wollastonite Composite Through Electro Slag Refining Process |
| Mithipati Siva Bhaskar | Surappa M. K. | Recovery and Recrystallization Behaviour of AA356/SiCp Composites |
| Modhura Biswas | Ashok M. Raichur | Colloidal Stability of Nano Zirconia in the presence of Dispersants |
| Mrityunjoy Hazra | Subodh Kumar | Corrosion and Wear Studies of ACM 810 alloy and Interrupted Creep Behavior of Heat-Resistant Mg-Alloys ACM 810, ACM 720 and AZ 91D |
| Naveen Kumar | Govind S. Gupta | Optimization of Boron Carbide manufacturing Process by a Carbothermal Route |
| Ram Prabhu T. | Ramamurty U. | i Mechanical properties of P/M processed low alloy steel, ii To develop process and characterization low density cenosphere filled steel Cellular steel |
| Srinivas V. | Chokshi A. H. | A Study on Strength Dependence of Individual Phases on the Onset of Superplasticity in Al-Cu Eutectic Alloy |
| Sumanth G. | Vikram Jayaram | Contact Deformation in TiN/Al, TiN Multilayer films on Stainless Steel Substrate |
| Udayagiri Sai Babu | Karthikeyan S. | Effect of Boron addition on Microstructure and Mechanical Properties of CastTi-6Al-4V Alloy |
| Vijay Pal Shivran | Kamanio Chattopadhyay | Synthesis, Characterization and Mechanical Testing of AlGaIn30CoCuNiAg.540SnPbSbBi20TiV10 High Entropy Alloy |
2007
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Appala Naidu G. | Abinandanan T. A. | Microstructure Evolution during Sintering: A Phase Field Study |
| Kaushik Das | Ramamurthy U. | Evaluation of Mechanical Properties of Li2B4O7-Bi2O3-Nb2O5 Glass-Ceramics by Instrumented Indentation |
| Krishna Reddy Jonnala | Satytam Suwas | Processing-Texture-Property Correlation in Materials Processed by Equal Channel Angular Extrusion ECAE |
| Manas Kumar Mondal | Govind S. Gupta | Computer Simulation of RH and REDA Processes Used for the Production of Ultra-Low-Carbon Steel |
| Manohar N. | Surappa M. K. | Grain Refinement and Process ing of Magnesium and Al-10% Mg Alloy Chips in Bulk Form by Conventional Deformation Processes |
| Niranjan Behera | Subramanian S. | Synthesis of Aluminum Titanium diboride composite through Electroslag Refining Process |
| Poorwa Bhagwat | Vikram Jayaram | Study of Fatigue of TiN Coating on Stainless Steel by Four Point Bending |
| Pradipta Ghosh | Chokshi A. H. | Room Temperature Mechanical Behavior of Electrodeposited Nickel and Nickel-Alumina composite |
| Praveen Kumar | Kamanio Chattopadhyay | Development of High Strength Ni-Ti-Ta Ternary Eutectic Alloys |
| Shishir Jain | Satyam Suwas & Ranganathan S. | Reconstruction of 3D Microstructures Using Serial Sectioning Techniques: Titanium Alloy and Steel |
| Sujoy Pal | Subodh Kumar | Creep and Wear Behaviour of AE42 Alloy and AE42 Alloy Based Composites |
| Vinay Jain | Karthikeyan S. | Atomistic Study of Factors Affecting Planar Fault Energies in Ni3Al |
2006
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Manoranjan Mishra | Surappa M. K. | Processing of bulk nanostructured materials in 6061-T6 and Al-5%Mg alloy |
| Ashwani Kumar | Jacob K. T. | Re-evaluation of thermodynamic properties of manganese oxides : MnO, Mn3O4, Mn2O3 and MnO2 |
| Nilesh Kumar | Abinandanan T. A. | A study of the Kirkendall effect by phase field method |
| Sugeetha V. | Vikram Jayaram | A study of contact indentation fatigue damage of TiN thin film on stainless steel substrate |
| Santosh Kumar | Subramanian S. | Synthesis of aluminium silicon carbide and aluminium boron carbide composites by electroslag refining process |
| Chukka Rami Naidu | Govind S. Gupta | Characterization of boron carbide produced by carbothermal route |
| Debdutta Roy | Ramamurty U. | Fatigue in Ni-Ti shape memory alloy wires |
| Pradeep Agarwal | Subodh Kumar | Impression creep study of newly developed magnesium alloys MRI 230D and MRI 153M |
| Kailash Chandra Jajam | Kishore | Studies on scanning electron microscopic features of impacted and post-impact compression-failed glass/epoxy composites |
| Lokesh Kumar Paliwal | Ranganathan S. & Satyam Suwas | Reconstruction of 3D microstructures using Montage based serial sectioning technique in A356 and A356 with 20% SiC |
| Suravarapu Prakasha Rao | Ashok M. Raichur | Dispersion studies of nano zirconia |
| Hari Srinivas Goripati | Vikram Jayaram | Deposition of 8mol% yttria stabilized zirconia by combustion flame pyrolysis and its thermal fatigue study |
| Ratnabhupala Reddy P | Kamanio Chattopadhyay | Studies on melting temperature depression for Sn-Ag-Cu and Sn-Zn solder alloys by mechanical alloying/milling |
| Rajesh K | Chokshi A. H. | Creep and grain boundary sliding studies on coarse grained AZ31 Mg alloy |
| Ramana Murthy Kolluri N. V. V. | Ramamurty U. | Strain hardening and fatigue in metal foams: The effect of constraint |
| Rama Krishna M. | Subodh Kumar | Fatigue crack propagation along microstructural gradient in AlZnMgCu alloy |
2005
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Amitesh Madeshia | Kamanio Chattopadhyay | Glassy phase embedded in crystalline matrix |
| Gaurav Singh | Abinandanan T. A. | A phase field model of thermal grooving of grain boundary |
| Pradeep Kumar Kraleti | Vikram Jayaram | Contact fatigue behaviour of TiN films by indentation technique |
| Yashvant Singh | Subramanian S. | Surface chemical studies on graphite suspension in aqueous media using different dispersants |
| Shakti Pravesh | Subramanian S. | Removal of iron from clay using chemical leaching and bioleaching techniques |
| Manish Gopal | Govind S. Gupta | Mathematical modeling of Acheson process |
| Lav Maheshwari | Ramamurty U. | Micromechanisms of deformation and fracture in Ti-B composites |
| Manish Patel | Ranganthan S. & Subodh Kumar | Correlation of microstructures and mechanical properties of sand-cast Mg97Zn2Y1 alloy and squeeze-cast AE42 alloy |
| Santosh Kumar Meghani | Vikram Jayaram | Synthesis of titanium oxide films by flame spray pyrolysis and their characterization |
| Yathapu Nithin | Surappa M. K. | Characterization of nano-size platelet/fiber reinforced polymer matrix composites |
| Vikas Kumar Sinha | Lahiri A. K. | Studies on bubble formed by liquid-liquid reaction |
| Amit Kiran | Kishore | Studies on the erosive behaviour of syntactic foam |
| Kanhaiya Kumar | Surappa M. K. | Processing of bulk nanocrystalline materials by conventional deformation processes |
2004
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Bhesetti Siva Suri Chandra Rao | Subodh Kumar | Creep and wear behaviour of AE42 alloy and AE42+20% saffil composite |
| Suresh Kumar M. | Kishore | Mechanical behaviour of polymeric systems with varying adhesively bonded area |
| Prasad M. J. N. V. | Chokshi A. H. | Work hardening and rate sensitivity of copper at room temperature as a function of grain size |
| Vijay Karthik S. | Vikram Jayaram | Preparation and characterization of lead zirconate titanate PZT films by flame spray pyrolysis |
| Kulbhashkar Singh | Surappa M. K. | Processing and characterization of magnesium alloy AZ91 – fly ash composite |
| Korimilli Eswara Prasad | Lahiri A. K. | Simulation of cooling rate in Al-Mg alloys and structure – property correlations |
| Tanay Ray | Thermodynamics and adsorption behaviour of the nano phases in the Bi-Sn system | |
| Prashant Kumar Kulshreshtha | Kishore | Hygrothermal and post-impact effects on mechanical properties of glass-reinforced epoxies |
| Prakash Kini M. | Vikram Jayaram | Processing of Al2O3 – ZrO2 – SiC nanocomposites by pressure aided densification of bulk amorphous compacts |
| Srikant G. | Ramamurty U. | Strain distribution underneath a Vickers indenter |
| Sushil Kumar Giri | Ramamurty U. | Fatigue in Ni-Ti-Fe shape memory alloys |
| P. Prakash | Ashok M. Raichur | Synthesis and characterization of nickel oxide nanoparticles through microemulsion technique |
| Abhijit Pramanik | Kamanio Chattopadhyay | Microstructural evolution in laser surface alloyed Al-Sn |
| M. Kodandaram | Abinandanan T. A. | Effect of anisotropy in interfacial energy on microstructural evolution during spinodal decomposition |
| Venugopala Rao E. | Chokshi A. H. | Hot deformation characteristics of extruded magnesium AM20 alloy |
| Rowthu Veera Babu | Subramanian S. | Processing of aluminium – titanium alloys and aluminium – based metal matrix composites by electroslag refining |
2003
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Swati Biswas | Surappa M. K. | Studies on driven systems : The case of Cu-Ag and Cu-Ag-Fe |
| B. Shyam Sundar | Chokshi A. H. | Hot working of as-cast dilute magnesium alloys Mg-2.2 Al-0.5Mn and Mg-2.3 Al-1.06 Zn-0.5Mn |
| Ashok Kumar Mondal | Hajra J. P. | Thermodynamics and phase equilibria in the selected quaternary III-V semiconductor alloys |
| Niraj Nayan | Ramamurty U. | Mechanical fatigue in Ni-Ti shape memory alloys |
| Shivajiv Sinha | Subodh Kumar | Effect of thickness, crack orientation and heat treatment on fracture toughness of 7010 aluminium alloy |
| Virendra Singh | Sastry D. H. | Effect of niobium and titanium on the creep behaviour of Fe3Al |
| M. C. Kumaran | Ramamurty U. | Energy absorption characteristics of aluminium foam during conical indentation |
| Bontha Kiran Kumar | Kishore | Dependence of impact properties on the bond area at the interface of neat epoxy slabs |
| Somnath Bhattacharyya | Govind S. Gupta | Measurement of liquid hold-up in presence of gas flow in a packed bed |
| Sanjay Agarwal | Lahiri A. K. | Effect of ball milling on reduction of iron ore using coal |
| Sandip P. Harimkar | Kishore | Response to impact in epoxy systems containing short fibers and/or oxide particle reinforcements |
| Naba Kishore Kalo | Vikram Jayaram | High-pressure low-temperature densification behaviour of amorphous Al2O3-20%ZrO2 |
| Bakshi Srinivasa Rao | Ranganathan S. | Crystallization kinetics, thermal stability and microstructural evolution of Fe-Co based metallic glasses |
| Prachi Galgalikar | Surappa M. K. | Investigation of serrated flow in Al-7Mg-20% SiCp composite |
| Nitin P. Wasekar | Subramanian S. | Effect of processing route on impact toughness and tensile strength of B2 FeAl intermetallics |
| Mrigandra Singhai | Ashok M. Raichur | Removal of Arsenic from synthetic waste water using fly ash and optimization of parameters using statistical analysis |
| Randhir Singh | Jacob K. T. | A study on mass/charge transport in mixed conducting solid oxide fuel cell |
2002
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Amitabh Kumar | Subramanian S. | Studies on production of FeAl by electroslag remelting process |
| Atish Kumar Ray | Kamanio Chattopadhyay | Studies on undercooling of copper-phosphorous binary alloy |
| Rashmi Ranjan Mohanty | Abinandanan T. A. | A diffuse interface model study of spinodal decomposition inside a particle |
| Subhash S. Mahajan | Kishore | Compression and short beam test on dry and water exposed surface treated ash particulate in epoxy composites |
| Ranjan Datta | Ranganathan S. | Synthesis, crystallisation and microstructural evolution of iron based metallic glasses |
| Arijit Maitra | Lahiri A. K. | Mathematical modeling of blast furnace hearth drainage |
| Sriramulu Y. | Subodh Kumar | Effect of thickness and width on fracture toughness of 7010-T6 aluminium alloy |
| Neelapu Ravi Kumar | Ramamurty U. | Mechanical characterisation on Mg/SiC composites |
| Sudheer Kumar Puvvula | Ramamurty U. | Projectile velocity dependent energy adsorption characteristics of a closed-cell aluminum foam |
2001
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Lakshya Kumar | Dwarakadasa E. S. | Failure Analysis of valve springs |
| Manas Ranjan Nayak | Lahiri A. K. | Studies on blast furnace hearth drainage and mixing characteristics inside a packed bed |
| Sthitadhi Das | Kishore | Effect of absorption in water and NaCl media on the compressive strength of jute fibre reinforced epoxy system |
| Pritish Bhattacharya | Abinandanan T. A. | A fourier spectral method of studying spinodal decomposition |
| Rajiv Ranjan Bhardwaj | Subodh Kumar | To study the effect of plate thickness and crack orientation on fracture toughness behaviour of 7010-T6 aluminum alloy |
| Suchismita Sanyal | Kamanio Chattopadhyay | Microstructural development in laser cladding and remelting of Al-Si-Bi on Al-Si substrate |
| Shivkumar Khaple | Subramanian S. | Life cycle assessment of lead in a secondary lead smelting plant |
| Kaushik Roy | Ranganathan S. | Synthesis, crystallisation and characterisation of Mg-TM-RE metastable alloys |
| Parveen Sood | Jacob K. T. | Thermodynamics of undoped rare earth manganates for CMR applications |
2000-1991
2000
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Panvekar Vivek M. | Ashok M. Raichur | Arsenic removal from drinking water using rare earth oxides by adsorption process |
| Patel Masrur Mubashar | Subodh Kumar | Investigation of serrated flow in Al-5% Zn-1%Mg alloy |
| Vikram Jayaram T. | K. S. Raman & Seshan S. | Production of near net shape castings – through plaster of paris moulds |
| Nachiketa Shukla | Ranganathan S. | Synthesis, crystallisation and mechanical properties of Mg-based amorphous alloys |
| M. Jyoti Basu | Ashok M. Raichur | Removal of fluoride from solution by adsorption |
| J. Srikanth | Natarajan K. A. | Studies on bioprocessing of titania using bacillus polymyxa |
| L. Satyavathi | Sastry D. H. | Studies on the creep behaviour of powder processed Fe-40 at. % Al alloys |
| Sabita Sarkar | Govind S. Gupta | Conjugate mass transfer around a spherical particle in unsteady state condition |
| Subhradeep Chatterjee | Abinandanan T. A. | A diffuse interface model simulation of grain boundary grooving |
| Suman Kumar Mitra | Kamanio Chattopadhyay | Investigation on the synthesis of bulk metallic glass in Zr-Ti-Cu-Ni-Al based alloy system |
| Krishanu Biswas | Kamanio Chattopadhyay | Development of quasicrystalline coating of Al-Cu-Fe system by laser cladding and detonation gum process |
| Sanjit Bhowmick | Chokshi A. H. | High temperature deformation of fine grained equal channel angular extrusion processed 2124 Al alloy |
| Anasua Maiti | Kishore | Effect of hygrothermal aging on the compressive strength and fractography of glass-epoxy composite |
| Debdutt Patro | Vikram Jayaram | Phase evolution studies in ZnO-Al2O3 as synthesised by spray pyrolysis and by citrate-gel routes |
| S. S. V. Ravikumar | Abinandanan T. A. | Modelling of nucleation |
| Rajendra Prasad Biswal | Subramanian S. & Lahiri A. K. | Novel studies on joining of aluminium and steel using the electroslag technique |
| Debajyoti Nayak | Kishore | Study of hygrothermal absorption and compression strength in glass-epoxy composite |
| Indrajit Charit | Chokshi A. H. | High temperature deformation characteristics of a low purity 3 mol% yttria Stabilized zirconia |
| Samaresh Changdar | Dwarakadasa E. S. | Influence of spray forming on the wear behaviour of hypereutictic Al-20%Si alloys |
| P. Rajani | Dwarakadasa E. S. | Effect of processing parameters on ring rolling of Ti-6Al-4V |
| Sandeep Kumar Vishwakarma | Govind S. Gupta | Transient modelling and computer simulation of multiple hearth roaster |
| H. Sanjay | M. V. Bhat | Studies on corrosion of nodular cast iron in aqueous sodium chloride solution |
| Sarmistha Samanta | Subodh Kumar | Manufacturing of functionally gradient material in an Al-5Zn-1Mg alloy specimen |
| Chandan Mondal | Surappa M. K. | Studies on microstructural evolution and recrystallization behavior of Al-10Mg/SiCp composite by EBSP technique |
| Ajitesh Narayan | K. S. Raman & Seshan S. | Studies on squeeze cast magnesium alloys |
| Nirmal Kumar | Lahiri A. K. | Partitioning of heat for gas solid reaction |
| Samrat Choudhury | Vikram Jayaram | High-pressure low-temperature densification behaviour of amorphous Al2O3-37.5 mole% Y2O3 |
| Partha Patra | Natarajan K. A. | Studies on bioprocessing of zirconia |
| Niroj Kumar Dash | Dwarakadasa E. S. | Development of protective surface coating produced by thermal spray and slurry coating processes |
| Chhail Kumar Behera | Jacob K. T. | Activities of spinel components in the pre-reduced chrome ore : Modelling and experiment |
| Sunil Kumar G. | Subramanian S. & Lahiri A. K. | Studies on development of plain carbon steel-alloy bimetallic joints by electroslag remelting process |
| Venkatasai Prasad K. | Sastry D. H. | Studies on peripheral grain growth in extruded 2014 Al alloy |
| Sachin P. Deshmukh | Ranganathan S. | Oxidation studies of MoSi2 composites |
| Yogeshwari Prasad Pandy | Lahiri A. K. | Simulation of fluidized bed in corex process |
| Pande Aniruddha Suresh | Surappa M. K. | Dry sliding wear study of Al-Si-SiCp composites against automobile brake pad |
1999
| Student | Advisor(s) | Thesis title |
|---|---|---|
| U. Rama Krishna | Surappa M. K. & Sastry D. H. | Tribological behaviour of Al-Si-SiCp composites/automobile brake pad system under dry sliding conditions |
| Amitava Mukherjee | Natarajan K. A. | Biooxidation studies on gold bearing pyrite-arsenopyrite concentrates |
| Pankaj Kumar Jain | Vikram Jayaram | Processing and characterization of SiCp reinforced Al-AlN matrix composites produced by directed melt nitridation |
| N. Sirish | Chokshi A. H. | High temperature deformation behaviour of 3 mol% yttria stabilized tetragonal zirconia |
| A. Krishna Kanth | Hajra J. P. | Thermodynamics of Mn-Mo alloy system using the isopiestic technique |
| Vasanth Kumar P. | Govind S. Gupta | Computer simulation of Acheson process |
| Suman Babu Adduri | Dwarakadasa E. S. | Dry sliding wear behaviour of Mg alloys |
| Narasimha Rao K. V. | Surappa M. K. | Investigation of serrated flow in Al-10%Mg alloy |
| Ravikumar A. V. | Dwarakadasa E. S. | Evaluation of wear and corrosion behaviour of magnesium based alloys and composites AZ91 + 10% SiCp |
| Shantanu V. Madge | Ranganathan S. | Mechanical alloying of Zr-based bulk metallic glass forming alloys |
| Anindya Poddar | Kamanio Chattopadhyay | Microstructural development of aluminium-silicon-bismuth alloy clad using laser beam |
| A. Srinivasulu | Kishore | Effect of moisture on the mechanical properties of glass or carbon fiber reinforced epoxy composites |
| S. Sundarsriram | Dwarakadasa E. S. | Effect of cryogenic treatment on tool steels |
| Subrata Pal | Lahiri A. K. | One-dimensional steady state multi phase mathematical model of melter gasifier |
| Tarun Kumar Kundu | Natarajan K. A. | Modelling for biooxidation of gold bearing pyrite-arsonopyrite concentrates in a continuous flow stirred tank bioreactor |
| Basab Bhattacharya | Ranganathan S. | Melt spinning of Al based glass forming alloys : A study |
| Saurabh Nigam | Subodh Kumar | Microstructural investigation of maraging steel MDN-350 |
| Sudhakar G. | Hajra J. P. | Thermodynamics of surfaces and adsorption in binary metallic systems |
1998
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Papayya Raju A. | Abinandanan T. A. | Precipitation in ternary systems : a Monte Carlo study |
| Ajay K. Ghode | Surappa M. K. | Wear studies on A356 and A356-SiCp hybrid composites under dry sliding condition |
| Ashish Garg | Ranganathan S. | Fabrication of Al based composites by liquid phase sintering and interface characterisation |
| Nikhil Gupta | Kishore | Fabrication and characterisation of syntactic foams and their sandwiches |
| Ravi sankar K. V. | Chokshi A. H. | High temperature deformation and cavitation in 300 ppm magnesia doped alumina |
| Pritha Choudhury | Natarajan K. A. | Bio-corrosion studies of titanium in presence of Bacillus Polymyxa and Thiobacillus ferrooxidans |
| Aloke Paul | Natarajan K. A. | Beneficiation of iron ore minerals |
| Phaniraj Prabhakar M. | Ranganathan S. | Mechanical alloying in Al-Cr and Al-Cr-Zr systems |
| Ratna Pal | Vikram Jayaram | Synthesis and characterisation of finely dispersed Pb in alumina |
| Pradhan S. K. | Dwarakadasa E. S. | UHMWPE-CSP Coconut shell powder composites, processing and characterisation |
| K. K. Prashanth | Kamanio Chattopadhyay | Laser surface cladding of copper on iron substrate |
| Sujata Hazra | Lahiri A. K. | Simulation of flow behaviour in reduction shaft of corex process |
1997
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Bikramjit Basu | Kamanio Chattopadhyay | Laser surface cladding of intermetallics on iron substrate |
| Jakkaraju Rajkumar | Ranganathan S. | High strength aluminium alloys : Novel strategies for their development |
| Usha D. | Prasad Y. V. R. K. | Design for triaxial compaction of powder and hot working of distaloy compact |
| Shashishekara Adiga | Abinandanan T. A. | Molecular dynamics simulation of vacancy migration under external forcing |
| Prashant Kumar Sharma | Natarajan K. A. | Biocorrosion studies of some structural materials in presence of Bacillus Polymyxa |
| Kasichainula Sridhar | Kamanio Chattopadhyay | Studies on thermo-electric power of Cu2Te synthesized by mechanical alloying and grinding |
| Gautam Mukherjee | Vikram Jayaram | Ball milling of spray pryolysed ZrO2-Al2O3 powders |
1996
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Mukesh Bharadwaj | Lahiri A. K. | Solid flow studies in blast furnace stack |
| Balasubramanya R. | Jacob K. T. & G. N. K. Iyengar | Thermodynamics of cation distribution in spinels : A phenomenological |
| Srinivasan Raghavan | Vikram Jayaram | A study on the processing and ‘levitation induction’ sintering of composite powders |
| Sanjay Kumar | Ranganathan S. | Synthesis and crystallisation studies of Al85Ni5Y9M M=Fe, Ti,Mg metallic glasses |
| Snehasish Chakraborty | Lahiri A. K. | Asymmetry and Oscillation of the fluid flow patterns in a continuous casting mould : A water model study |
| Manish Mandal | Jacob K. T. | Models for activity coefficient of the nonmetallic solute in binary liquid alloys |
1995
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Soumyajit Mandal | Chokshi A. H. | Grain growth kinetics of a superplastic Al-33% Cu alloy |
| Anand Subramanian | Ranganathan S. | Formation and crystallization of Al-Ni-Fe,Cu,Si metallic glasses |
| T. Seshacharyulu | Prasad Y. V. R. K. | Processing map for Ti-6Al-4V and simulation of metal forming processes |
| S. Ravindra Godbole | Lahiri A. K. | A mathematical model to simulate fluid flow in continuous slag casting mould |
| Basavarasu Ranganad | Abinandanan T. A. | Construction of phase diagram by monte carlo simulation technique |
| P. Markondeya Raj | Jacob K. T. | Assessment and evaluation of thermodynamic data |
| Tirthankar Dasgupta | Dwarakadasa E. S. | Dry sliding wear behaviour of Al-Si alloys |
| Ajay Chauhan | Vikram Jayaram | Phase evolution, segregation and grain coarsening behaviour in Al2O3-MgO as synthesized using spray pyrolysis |
| Vinay Kumar Singh | Kishore | Moisture effect on graphite containing glass/epoxy composites |
| Neil Savio D’Souza | Chokshi A. H. | Densification and grain growth in 8-Mole% Yttria stabilized cubic zirconia |
| Kanad Saha | Hajra J. P. | Evaluation of thermodynamic properties of Mn-Mo alloys by the isopiestic technique |
| Sanyasi Rao | Subramanian S. | Flotation studies on calcite and dolomite |
| B. Seshasail | Surappa M. K. | Synthesis of Al-TiCp composite by in-situ process and its characterization |
| Iraj Asadi Khoshooei | Dwarakadasa E. S. | Corrosion behaviour of Al-SiC composite materials |
1994
| Student | Advisor(s) | Thesis title |
|---|---|---|
| K. Saibaba | Dwarakadasa E. S. | Spray atomisation and deposition route for particulate reinforced metal matrix composites |
| P. Rajasekharam | Hajra J. P. | Thermodynamics of surfaces and adsorption in binary metallic systems |
| M. S. M. Saifullah | Ranganathan S. | Nanomodulated oxide superlattices by electrodeposition |
| Mohammed Ismail | Sastry D. H. | Studies on electrochemical corrosion of Mg-Zn-Mn and Mg-Li-Al alloys |
| P. Ravi Sankar Srinivas | Sastry D. H. | Creep behaviour of 10 vol. % SiCp – 6061 Al alloy composite |
| M. Murali Krishna | Kishore | Friction and wear studies of glass epoxy composite |
| Durvesh B. Ganveer | Lahiri A. K. | A mathematical model to simulate the flow of fluid in a continuous casting mould |
| Ashutosh Suresh Gandhi | Vikram Jayaram | Aerodynamic levitation and induction melting for solidification studies on a high temperature oxide system |
| Kiran Balaji Bemarkar | Hajra J. P. | Thermodynamics of Mn-Mo alloy |
| Srikanta Nandy | Kamanio Chattopadhyay | A comparative study of the influence of zirconium in non-equilibrium processed aluminium rich aluminium nickel-alloys |
| Prajina Bhattacharya | Kamanio Chattopadhyay | Synthesis and characterisation of SiO2 – Pb and Al2O3 – Pb nanocomposites prepared by sol-gel route |
| Udaya Bhat K. | Surappa M. K. | Laser surface treatment of aluminium alloy A356-SiCp composites |
| Prasad S. V. N. | G. N. K. Iyengar | Studies on the synthesis and A.C. conductivities of doped compounds of Bi2VO5.5 aurivillius phase |
| Ganesh Kumar R. | Dwarakadasa E. S. | Dry sliding wear behaviour of aluminium alloys |
| Ramprasad Nagaraja | Prasad Y. V. R. K. | Deformation processing of aluminium – 10% zinc alloy A study using processing maps |
| Subramanian K. R. V. | Ranganathan S. | Microstructural evolution in eutectic and hypoeutectic Al-Si alloys during rapid solidification |
| Soman Yogesh Sudhakar | Jacob K. T. | Activity coefficient of oxygen in binary liquid alloys |
| Sucheta N. Mannikar | Surappa M. K. | Solidification and microstructure studies in SiCp dispersed aluminium alloy composites |
| Mahesha Prasad S. | Lahiri A. K. | Statistical analysis of effect of parameters on defects in continuous casting |
1993
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Srinivasa Kumar Y. | Prasad Y. V. R. K. | Effect of aluminium content on the dynamic recrystallisation of aluminium bronze – A study using processing maps |
| Satish Babu P. M. | Jacob K. T. | Determination of cation distribution in CO3O4 through Sebeck coefficient measurements |
| Eunny Sridhar | Lahiri A. K. | Simulation of fluid flow in continuous casting strip tundish |
| Suryanarayana Murty S. V. | Prasad Y. V. R. K. | Application of dynamic materials modelling for the optimisation of hot workability and control of microstructure in ceramics – A first report |
| Sreenivas Rao K. V. | G. N. K. Iyengar | Ageing studies on ZnO based composites for surge arrestor applications |
| T. A. Narayana Suthan | Spray forming of composites atomization and particle injection | |
| Laxmidhar Besra | Kamanio Chattopadhyay | A comparative study on the microstructural development under different solidification processing conditions in a system showing submerged miscibility gap – The case of Zn-Sn binary alloys |
| Rampada Manna | Surappa M. K. | Studies on recrystallization of 2024 Al-SicP composites |
| Hari Venugopalan S. | Ranganathan S. | Crystallization studies of Ti-Cu metallic glasses |
| Srinivasa Rao P. | Effect of trace element additions on processing and thermal behaviour of aluminium lithium alloys | |
| Ravi Kumar Tolety | Vikram Jayaram | Optimisation of deposition conditions for DLC formation in HFCVD system |
1992
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Sivaraman M. V. S. | Vikram Jayaram | Design and fabrication of a HFCVD reactor for synthesis of diamond thin films |
| Tarasankar Mahata | Lahiri A. K. | Study of heat transfer coefficient at the solid-liquid interface inside a mould |
| Amit Bandyopadhyay | Dwarakadasa E. S. | Hydrogen degradation studies of medium strength aluminium alloys 8090, 2091, 2014 and 2024 |
| Saibal Basu | Surappa M. K. | Studies on metal matrix composites |
| Mukesh Kumar | Mallya R. M. | Thin layer ceramic processing I Studies in doctor blade tape casting II Arc plasma process for ceramic coatings |
| Ankur Goyal | Ranganathan S. | Formation and crystallization of Al-Y-Ni-Cu metallic glasses |
| Anirudha Vaidya | G. N. K. Iyengar | Studies on electro-thermal ageing of commercial ZnO varistors |
| Sunanda D. | Sastry D. H. | Superplasticity in intermetallics – A study in Ti-24 Al-15Nb alloy |
| Sivaram D. | Kishore | Studies on bond strength of adhesively bonded lap shear specimens |
| Shiv Brat Singh | Kamanio Chattopadhyay | Preparation, characterisation and hardness studies on nanodispersed Zn-10 wt% Bi alloy |
1991
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Bhaskar Dutta | Surappa M. K. | Fabrication of studies on precipitation hardening behaviour of 2024 Al – SiCp composites |
| C. M. Manjunatha | Lahiri A. K. | Mathematical modelling of solute redistribution during solidification in continuous casting |
| Savala Deva Dath | Kishore | Studies on wear of glass epoxy systems |
| Rama Murty U. | Dwarakadasa E. S. | The effect of heat treatment and Li depletion on mechanical properties and fracture of Al-Li alloys |
| L. Ananthanarayanan | Ranganathan S. | Recrystallization studies of Al-SiCp composites experiments and computer simulation |
| Niladri Dasgupta | Mallya R. M. | Tape casting for advanced ceramics : design of tape casting machines for ceramic substrates and high temperature superconductors |
| Vinod Rambhau Patil | Sastry D. H. | Effect of heat treatment conditions on impression creep behaviour of alloy MA-957 |
1990-1981
1990
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Atul Kumar | Dwarakadasa E. S. | Anisotropic tensile fracture behaviour of aluminium lithium alloy 8090 |
| Sarath Chandra | Kishore | Some studies on modifications of glass/novolac and glass/resol |
| T. Ramesh | Natarajan K. A. | Studies on bacterially induced corrosion |
| T. Vijay Bhaskar Reddy | Lahiri A. K. | Simulation of fluid flow on continuous casting mould |
| Sathya Kumar Y. V. | Prasad Y. V. R. K. | Mechanical processing of copper powder compacts |
| Isukapally Ramana | Ranganathan S. & G. N. K. Iyengar | Studies on high Tc superconductors Bi2Sr2Can-1CunOx c-Effect of Pb substitution |
1989
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Vijay Balakrishna | Kishore | Influence of alumina additions on the mechanical properties and fracture features of glass fibre-reinforced expoxy composites |
| Manjini S. | Ranganathan S. & G. N. K. Iyengar | Studies on high Tc YB2Cu3O7-d superconductors – Ag substitution and aging |
| Nihar Kanti Nanda | Natarajan K. A. | Wear of high chromium cast iron during grinding of Kudremukh iron ore |
| Gopala Krishna B. | Mallya R. M. | Design and construction of vibration ball mills for mechanical alloying and communication |
| M. Vasudevan | Surappa M. K. | Fabrication and evaluation of aluminium matrix composites reinforced with SiC particles |
| L. Venkata Rama Rao | Surappa M. K. | Preparation and processing of Al-2%, Li-3%, Mg-0.1% Be alloys |
1988
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Rajat Kumar Sengupta | Mallya R. M. | Mechanical alloying in the Cu-Fe system |
| Sukhendu Samajdar | Kishore | Some aspects of fracture in FRP compsotes with HTBN-toughened epoxy matrix |
| Sandur Ajith Kumar | Dwarakadasa E. S. | Ultrathin multilayer metal matrix laminates Cu/Al, Cu/Cr preparation and properties |
| K. Srinivasa Rao | Kishore | Dry sliding and grinding media wear studies on high chromium white cast iron |
| Narasimham T. V. L. | Prasad Y. V. R. K. | Processing map for copper powder compact |
| Murty B. S. | Ranganathan S. & Mohan Rao M. | Studies on solid state amorphization by mechanical alloying |
| Simon Paul | Prasad Y. V. R. K. | Design and stress analysis for extrusion die assembly and flow analysis for different die geometries |
| Kamles Mundra | Lahiri A. K. | Bicubic spline smoothing of noisy data in extrusion |
| Kurup Venugopal | Lahiri A. K. & Kamanio Chattopadhyay | Solidification of metals in a flowing melt – a model study |
1987
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Panigrahi P. K. | Dwarakadasa E. S. | Computerised handling and prediction of properties of steels |
| Abhijit Roy | Raman K. S. & Murthy K. S. S. | Effect of cadmium on ageing characteristics of aluminium-7 silicon-0.3 magnesium alloy |
| Venkataraman R. | Prasad Y. V. R. K. | Analytical techniques for strain rate sensitivity evaluation in generating processing maps |
| Srinivasulu G. | Mallya R. M. | Studies on fine silver powder : its preparation and characterisation |
| Sree Kumar K. | Kamanio Chattopadhyay | Studies on the early stages of hardening in aluminium-lithium alloys |
| Manoj Gupta | Ranganathan S. | Quasicrystals in aluminium-lithium-copper system |
| Murali T. R. | Kishore | Wear of die steels |
| Sankha Subhra Sengupta | Raman K. S. & Dwarakadasa E. S. | Study on low cycle fatigue behaviour of LA 55 HSLA steel and its weldments |
| Ravichandran N. | Dwarakadasa E. S. | Effect of 1% aluminium addition on the aging kinetics and mechanical properties of Cu-9Ni-6Sn spinodal alloy |
| Sudhakar Choudary P. | Sastry D. H. | Impression creep on austenitic stainless steel 316 type weldments |
1986
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Asish Kumar Sinha | Lahiri A. K. | Cold modelling of bottom blown processes |
| Ravichandran M. V. | Dwarakadasa E. S. | Toughness evaluation of aluminium -4% magnesium-alumina liquid-metallurgy particle composite |
| Arun Kumar Sharma | Kamanio Chattopadhyay | Studies on age hardening behaviour of lithium containing aluminium alloys |
| Rajesh Prasad | Ranganathan S. & Kamanio Chattopadhyay | Five-fold symmetry in reciprocal space |
| Ramesh Prasad G. K. | Sastry D. H. & Seshan S. | Studies on forging and welding characteristics of S.G. Iron |
1985
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Parameswaran P. | Dwarakadasa E. S. | Property improvement of IS 7670 aluminium alloy by ESR |
| Kannayiram G. | Kamanio Chattopadhyay | Undercooling of eutectic alloys |
| Kamalesh K. Patel | Murthy K. S. S. & Raman K. S. | Surface finish of gray cast iron castings |
| Narasimha Rao B. | Sastry D. H. & M. Mohan Rao | Effect of texture and grain size on the mechanical properties of warm worked cadmium – 2.5 Mg alloy |
| Sanjay Kumar Dhua | Kamanio Chattopadhyay | A search for a metastable miscibility gap in zinc – indium system |
| N. K. Mukhopadhyay | Ranganathan S. | Effect of chromium addition on phase transformations in nickel-tungsten alloys |
| K. S. Ravichandran | Kishore & Dwarakadasa E. S. | Effect of thermal treatment on fatigue crack growth behaviour in a 0.22% titanium alloyed chromansil steel |
| Iyer Subramaniam | Raman K. S. | Investigation of shear damage in composites using acoustic emission analysis |
| Sreenivasulu R. | Dwarakadasa E. S. | Adhesive wear of FCC metals: aluminium, copper and silver |
| Basudev Mishra | Sastry D. H. & Seshan S. | Forging of S.G. Iron |
1984
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Asaithambi P. | Kishore | Friction and wear studies on HSLA steel and EGP composites |
| Lionel S. Amanna | K. I. Vasu & Bhat M. V. | Transition from Hall-Petch hardening to superplastic behaviour – a study with Al-6Cu-0.5Zr alloy |
| Vaidya N. K. | Lahiri A. K. | A selected project report on heat transfer in electroslag refining |
| Pitchai N. | Lahiri A. K. & Nayak U. B. | Studies on rheological and surface characteristics on the wet grinding of hematitie |
| Sathyanarayana C. G. | Ranganathan S. | Effect of microstructure and strain rate on tensile behaviour of VT-9 alloy |
| Srikanth S. | Hajra J. P. & Jacob K. T. | Solvent-solute and solute-solute intraction in a-solid solutions of Cu-As and Ag-As systems – Design of experiment |
| Srinivasan K. | Ranganathan S. & Raman K. S. | Heat treatment of 30 KAGSNA steel and study of mechanical properties |
| Surendranathan A. O. | K. I. Vasu | Transition from Hall-Petch region to superplastic region – Investigations with the Zn-Al eutectoid systems |
1983
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Abraham Koshie | Hajra J. P. | Thermodynamic measurements in alloys using fluoride electrolyte |
| Mohanty B. P. | G. N. K. Iyengar & Hajra J. P. | Studies on electroslag refining of commercial aluminium |
| Jagadeesha Acharya | Raman K. S. | Study of the effect of restraint intensity on weld cracking using ERC test |
| Madhusudhan G. | Raman K. S. & Seshadri M. R. | Use of eddy current test technique to determine the mechanical properties of gray cast iron |
| Murthy V. S. R. | Kishore & Seshan S. | Compacted graphite cast iron – a study on properties |
| James Victor Raj K. R. | Srinivasan M. N. & Kishore | Study on in-mould spheroidisation of spheroidal graphite cast iron |
| Rajadurai A. | Ranganathan S. | Effect of microstructure and strain rate on tensile behaviour of Ti-6242S alloy |
| Ramadasan E. | Ranganathan S. & Kamanio Chattopadhyay | Active eutectoid decomposition in a hypoeutectoid Zr-Ni alloy |
| Ramani S. | Lahiri A. K. & M. Mohan Rao | A cold modelling study on the mixing time and oxygen partition in LD convertor |
| Sampath V. | Sastry D. H. | Electroslag refining of aluminium alloy RR 58 and studies on impression creep and other mechanical properties |
| Sampath K. | Srinivasan M. N. & M. Mohan Rao | Nihard – micro alloying |
| M. C. Shaji | K. I. Vasu | Aluminium alloys as sacrificial anodes for galvanic protection of steel |
| Shiva Kumar C. | Sastry D. H. | Development and properties of electroslag refined RR 58 alloy |
| Subramanian C. | Kishore | Wear of aluminium graphite particulate composites |
| Sujatha K. | Mallya R. M. | Iron nickel as a binder in tungsten carbide hard metal |
| Vasudevan S. | Kamanio Chattopadhyay & Seshan S. | Influence of manganese additions on austenitic spheroidal graphite iron |
1982
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Anand K. G. | Kishore | Studies on the effect of heat input and temperature on impact strength of microalloyed steel |
| Balakrishna Rao K. | M. Mohan Rao & Murthy K. S. S. | Studies on the influence of some melting parameters in high strength grey iron |
| Basu A. K. | Lahiri A. K. | Analysis of the rotary kiln process for sponge iron manufacture |
| Chandrasekharan T. | Ranganathan S. & Mahajan Y. R. (HAL) | Studies on strength and tough ness of 30 kH GSA steel |
| Gowri S. | Ranganathan S. & M. Mohan Rao | Crystallization behaviour of Fe40Ni38Mo4B18 METGLAS 2826 MB |
| Mohan R. | Kishore | Studies on jute-glass hybrid fibre composites |
| Gopalakrishnan M. S. | Seshadri M. R. & Raman K. S. | Welding of Malleable iron |
| Raghunathan N. | Lahiri A. K. | Temperature simulation and thermal stresses in rolling mill |
| Venkatanarayana G. | Srinivasan M. N. & M. Mohan Rao | Inocculation of niresistTYPE-I influence on structure and mechanical properties |
1981
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Subodh Kumar | M. Mohan Rao | Effect of microalloying on casting characteristics and mechanical properties of Al bronzes |
| Sharad Prakash | M. Mohan Rao & Srinivasan M. N. | Effect of carbon, silicon and innoculants on the chilling characteristics of Ni-resist irons |
| Animesh Jha | K. P. Abraham | Studies on the removal of phosphorous from cast iron and ferro-chrome by electroslag remelting using Ca-CaF2 slag |
| Radhakrishna Upadhya | Prasad Y. V. R. K. & Murthy K. S. S. | Fracture toughness studies on Al-4.5 Cu alloy |
| Badgujar S. T. | Dwarakadasa E. S. & Kishore | Influence of Ti on the age hardening behaviour of Al-6Zn-.01 a Be alloy – effect of thermal and thermo mechanical treatments on the microstructure, mechanical properties and fatigue |
| Anil Kumar Gupta | Raman K. S. & Murthy K. S. S. | Effect of iron and room temperature ageing on the hardness of LM 25 alloy |
| Lele M. B. | Mallya R. M. | Reduction of ammonium para tungstate and ammonium molybdate by hydrogen |
| Rama Rao A. | G. N. K. Iyengar & Srinivasan M. N. | Study of inmold inoculation of grey cast iron |
| Venkateswaran T. V. | Dwarakadasa E. S. | A study of distribution of graphite in aluminium graphite composites |
| Balasubramanian S. R. | Lahiri A. K. | Calorizing of mild steel |
| Jamakhandi N. B. | Sastry D. H. | Effect of tin on the properties of high silicon S.G. iron |
1980-1971
1980
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Raghavendra R. | Seshadri M. R. | Structure and property correlation in pearlitic malleable iron casting |
1979
| Student | Advisor(s) | Thesis title |
|---|---|---|
| V. S. Vedula Sarma | Prasad Y. V. R. K. | Hot working characteristics of EN36A steel : A study by hot torsion technique |
| Sarma V. V. R. S. | Sastry D. H. | Effect of grain size on the high temperature yield stress in zinc and cadmium |
| Rao Arun M. | Raman K. S. & Seshadri M. R. | Studies on inclusion rating and dendrite arm spacing of steel castings |
| Rajendra S. | Prasad Y. V. R. K. | Design and fabrication of hot extrusion die assembly for the 250 ton hydraulic press |
| Kamal Kumar Shah | M. Mohan Rao | Studies on isothermal decomposition of supersaturated phases in the Cu-Zn systems |
| Gowrishankar S. | K. I. Vasu | Reflectance of metallic mirrors |
| Gopala B. | K. I. Vasu & Dwarakadasa E. S. | Production of iron powder |
| V. Lad Ashok Kumar | K. I. Vasu | Surface conversion coatings on metals |
1978
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Mohanan K. | K. I. Vasu | Electrowinning of copper |
| Prakash H. S. | K. I. Vasu | Ferric chloride leaching process for the complex copper-lead-zinc concentrates |
| Ambethkar M. | K. I. Vasu | Surface conversion coatings |
1977
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Panickar K. P. | Mallya R. M. & Raghuram A. C. (NAL) | Mechanical alloying |
| Bhat R. P. | M. Mohan Rao | Studies on the reclamation of Inconel X-750 turbine blades |
| Prakash T. G. | K. I. Vasu | Processing of chalcopyrite concentrations: Ferric chloride leaching and galvanic cementation |
| Narayan K. S. | Dwarakadasa E. S. | Isothermal age hardening characteristics of Al-6Zn alloy with .05 Be addition |
| Balachandran U. | K. P. Abraham | Chemical vapour deposition of titanium carbide on tool steels |
1976
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Madhusudhan | Mallya R. M. | Studies on metastable phases |
| Suryaprakash M. S. | Rohatgi P. K. | Design, fabrication and characteristics of biogas fired curcible furnace |
| Didolkar V. | Nayak U. B. | Beneficiation of low grade graphite ore from Ganacharpura Mines, Kolar district, Karnataka |
| Ajay Kumar Mishra | Lahiri A. K. & K. P. Abraham | Reduction of haematite with methane |
1975
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Srikanta Pandit B. V. | Mallya R. M. | Submicron particles produced by freeze drying – preparation of nickel ferrite |
| Prabhakar Singh | K. P. Abraham | Thermodynamic measurements in the MgO-SiO2 by high temperature galvanic – cell technique |
| Jana B. C. | Rohatgi P. K. | Bearing characteristics of Al-graphite composites |
| Babu Sathyan V. | K. I. Vasu | Design and development of acid pumps using high silicon iron |
1974
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Prakash T. L. | Mallya R. M. & Arunachalam V. S. (NSL) | Powder metallurgy of chromium |
| Saralaya D. L. | K. I. Vasu | Deformation behaviour of chromium |
| Subramanyam J. | K. P. Abraham | Application of high tempeature solid electrolyte galvanic cell |
| Narayanan V. | Hajra J. P. | Thermodynamics of binary and ternary silicate slags |
| Ramachandran S. | Rohatgi P. K. | Studies on bearing characteristics of Al-graphite composites |
| Yogarajan H. N. | K. P. Abraham | Activities in calcium oxide solid solutions |
| Sreerama Murthy A. | K. P. Abraham | Electroslag remelting of non-ferrous metals and alloys with special performance to titanium |
| Srinivasa C. L. | K. I. Vasu & Raman K. S. | Slat baths for industrial heat treatment |
| Mohan V. N. | Rohatgi P. K. & Prasad K. K. | Permanent mould casting – A thermal study |
| Kodanda Rao N. | Lahiri A. K. | Temperature profile in the blast furnace stack |
| Ilangovan S. | K. I. Vasu | Direct electro-recovery of copper from chalcopyrite concentrates used as a slurry anode |
| Yagneswaran A. H. | Mallya R. M. | Power metallurgy of stainless steel: Production of austenitic stainless steel power by intergranular and corrosion |
| Balakrishna Bhat T. | Kishore & K. I. Vasu | Effect of dispersion on ordering in Cu-Au |
1973
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Sellamuthu R. | K. P. Abraham (jointly with MRS, ME) | Application of ESR technique for the production of nodular cast iron |
| Prasad S. V. | K. P. Abraham | Electrochemical measurements of oxidation of Cu |
| Prasad T. K. | K. I. Vasu | Diffusion control in solid-fluid reactions |
| Narayan Rao K. | K. P. Abraham | A thermal analysis calorimeter for the determination of heats of transformations |
| Nagarajan V. | M. Mohan Rao | Multiphase diffusion in the system Cd-Zn |
| Lakshminarayan R. | Raman K. S. | Resistometric studies of phase boundaries in Sn-Cd alloy |
| Khaji K. M. | K. P. Abraham | Kinetics of reduction of cobalt oxide by hydrogen in fluidised bed |
| Jayasimha D. S. | K. I. Vasu | Extraction of copper from chalcopyrite concentrate by hydrometal- lurgical treatment |
| Galgali R. K. | K. I. Vasu & Prasad Y. V. R. K. | A study of the microstructural aspects of the fatigue in 70-30 brass |
| Chadramouli K. | Sastry D. H. | Mechanical properties of unidirectionally solidified eutectic alloys |
| Anand R. | K. I. Vasu | Extraction of copper from chalcopyrite concentrate by hydro-metallurgical treatments |
1972
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ananth Padmanabha S. | K. I. Vasu | Electrodeposition of iron group binary alloys |
| Chandrasekhara Pai B. | Dwarakadasa E. S. | Structural studies of unidirectionally solidified eutectic alloys |
| Ghopde A. D. | K. I. Vasu | Design and construction of a vacuum and mass flow type recording thermobalance and studies on initial oxidation of copper |
| Jayaraman N. | Sastry D. H. | Structural and resistometric studies of the order-disorder transformation in Cd-Mg alloys |
| Kannan C. | K. P. Abraham | Electroslag refining of aluminium |
| Ramadurai S. | K. P. Abraham | Studies on chemical vapour deposition |
| Ramesh K. R. | K. I. Vasu | Leaching of chalcopyrite |
| Srinivasan N. S. | K. I. Vasu | High temperature oxidation of Cu and Cu-Th alloys electrodeposition of Fe-Ni & Fe-Co alloy from the fluoborate bath |
| Sriramamurthy A. M. | K. P. Abraham & M. Mohan Rao | Thermodynamics and structural transformation in Sn-antimony system |
| Surendra Kumar Singh | K. P. Abraham | Kinetics of reduction of manganese dioxide pellets with hydrogen |
| Vijaya Prasad V. | K. I. Vasu | Electrolytic leaching of lemenite ore |
| Vinod Kumar Juneja | Dwarakadasa E. S. | Bearing characteristic and aluminium base bearing alloy |
1971
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Chandra H. | Dwarakadasa E. S. | Studies on low temperature plastic deformation in commercial aluminium |
| Kripakaran R. | M. Mohan Rao | Thermal stabilisation |
| Dwarika Prasad | K. P. Abraham | The design, construction and operation of liquid metal solution calorimeter |
| K. Ramaraju | Prasad Y. V. R. K. | Microstructural aspects of fatigue in Al and Al-Mg alloy |
| J. Ravindranath Shetty | K. I. Vasu & Prasad Y. V. R. K. | Stress corrosion cracking in Cu-12 Al alloy |
| C. Virupaksha Shastry | Sastry D. H. & Dwarakadasa E. S. | The unidirectional solidification of binary eutectic alloys |
| P. K. Balachandra | K. P. Abraham | Smelting of chromite ores in a tilting arc furnace designed and fabricated in the Department |
| Bhat K. L. | K. I. Vasu | High temperature oxidation of Cu and its alloys |
| Bhushan Lal Dhar | K. I. Vasu | Codeposition of Ni-Co alloys from fluoborate bath |
| Samir Nath Jha | K. I. Vasu & Dwarakadasa E. S. | Cavitation erosion of some marine alloys |
| Chiranjit Lal | K. P. Abraham | Production of nodular cast iron by electroslag process |
| Raghavan S. | K. P. Abraham | Thermodynamic properties of binary systems of high temperature solid electrolytes galvanic cell technique |
| Sivan V. | K. P. Abraham | Kinetic studies on the roasting of cadmium sulphide |
1970-1961
1970
| Student | Advisor(s) | Thesis title |
|---|---|---|
| R. T. Bhat | ||
| R. Dinkar Babu | M. Mohan Rao | Studies on Fe-Mn solvus lines |
| Jagannath Pujini | Mallya R. M. | Intermetallic compounds |
| S. K. Datta | Mallya R. M. | Fundamentals of glass to metal bonding |
| George Thomas | ||
| Shankar Shastry M. L. | ||
| Subba Reddy T. | Krishnan A. A. | Dispersion hardening in nickel-zirconia at low temperatures |
| A. Shantharam | K. P. Abraham | Production of high grade standard grade ferro-chrome from lowgrade chromite ores of Mysore |
1969
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Swapan Kanti Das | Krishnan A. A. | Variation of sizes of mratensite platelets and relative effects on its strength |
| Acharya B. N. N. | ||
| Misra P. S. | ||
| Bhutani A. K. | K. P. Abraham | Refining of steel by electroslag process |
| Ramanathan R. | K. I. Vasu | Inhibition of corrosion of aluminium in saturated AlCl3 solution |
| Bhatikar R. J. | Mallya R. M. | Stress-corrosion studies of aluminium-zinc-magnesium alloy C.D.T.D. 683 Al |
| Mathrubhootam K. | K. I. Vasu | Corrosion of Cu-Mn alloys |
| Srinivasa R. | K. P. Abraham | Thermodynamic properties of aluminium -zinc alloys |
| Chandrasekharan R. | K. I. Vasu | On the nature of stress corrosion of Al-Zn, and Al-Mg alloys |
1968
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ramani R. | K. I. Vasu | Aluminium in primary batteries |
| Rave P. G. | Krishnan A. A. | Mechanical and magnetic properties of sintered iron-glass |
| Kadukar A. D. | ||
| H. Sundaresh | K. P. Abraham | Activity measurements in binary systems |
| Maduri Krishnamurthy | C. R. Krishna Murthy | Fused salt electrolysis for production of ferro-manganese |
1967
| Student | Advisor(s) | Thesis title |
|---|---|---|
| P. K. Poulose | Raman K. S. | An apparatus for precise determination of internal friction |
| Kishore | Krishnan A. A. | |
| Vydyanath H. R. | Sastry D. H. | Resistometric study of pre-precipitation in Mg-Zn alloys |
| Seshadri S. K. | K. P. Abraham & M. Mohan Rao | Production of ferro-chrome off-grade Byrapur chromite ore |
| Sastry R. L. N. | K. P. Abraham | Electric smelting of chalcopyrite available at Ingoldab |
| K. Prabhakar | R. K. Ramamurthy | Flotation of hematite with sodium cleate |
| S. S. Balakrishna | K. I. Vasu | High temperature oxidation of ZrO2 dispersed nickel |
| Stan A. David | ||
| Prasad V. C. S. | Prasad Y. V. R. K. | Ausforming of a high speed steel |
| S. C. Gupta |
1966
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Venkatesh Bhat M. | Krishnan A. A. | High temperature oxidation characteristics of copper titanium alloys |
| Narasimha Murthy K. | Ramachandran V. | Effect of cold work on the ageing characteristics of Al alloys |
| Prasad K. K. | ||
| Gupta S. C. | C. R. Krishna Murthy | Elecrolytic Production of S & P free iron |
| R. Natarajan | K. P. Abraham | Reduction smelting of ilmenite to produce pig iron and titanium rich slag |
| Srinivasan N. K. | Ramachandran V. | Resistometric studies on kinetics of clustering in Al-Zn alloys |
| Hanumantha Rao T. | K. P. Abraham | Upgradation of chavars ilmenite concentrates by chloridisation and hydrogen reduction |
| Gokulratnam C. V. | Krishnan A. A. | Production of properties of some copper-titania alloy |
M. Sc. (Engg.)
2010-2001
2010
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Neelam Kaur Mullay | Govind S. Gupta | Study of gas-liquid flow behaviour in raceway zone under pulverized coal Injection |
2009
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Suman Sarkar | Abinandanan T. A. | Effect of Atomic Mobility in the Precipitate Phase on Coarsening: A Phase Field Study |
2008
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Rohini Garg | Satyam Suwas & Ranganathan S. | Study of evolution of texture and microsturcture during different modes of rolling and annealing of two – phase (α+ß) brass |
2007
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Rakesh Kumar | Govind S. Gupta | Development and validation of two-dimensional mathematical model of boron carbide manufacturing process |
| Sudha J. | Subodh Kumar | Fatigue damage characterization of carbon/epoxy laminates under spectrumloading |
| Potnis Prashant Ramesh | Vikram Jayaram & S. K. Biswas (ME) | Study of fracture properties of NiAl bond coats on nickel superalloy by three point bending of microbeams |
| Kishora Shetty (ERP) | Subodh Kumar & P. Raghothama Rao (Orgn.) | Ion nitriding of maraging steel (MDN 250A Grade) for light combat aircraft applications |
2006
| Student | Advisor(s) | Thesis title |
|---|---|---|
| R. Chitra | Kamanio Chattopadhyay | Synthesis of Cr3Si by Mechanical Alloying and Mechanically Activated Process |
| Kandala Ravi Sekhar | Kishore & S. Sankaran (Orgn.) | Studies on processing and characterization of syntactic foams with epoxy modified cyanate ester binder and glass microspheres |
| Mohammed Abdul Azeem | Ramamurty U. | Microstructure and texture evolution and its effect on mechanical properties in dilute magnesium based AZ21 alloy |
2005
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ranadeep Bhowmick | Kamanio Chattopadhyay & Ramamurty U. | Zr-based Bulk Metallic Glass - A study of Processing, Welding & Subsurface Deformation Mechanisms |
| V. Radhika | Natarajan K. A. & Subramanian S. | Studies on Bioremoval of Zinc and Cadmium using Desulfotomaculum nigrificans |
| Manas Mukherjee | Lahiri A. K. | Bubble Solid Interaction |
| Ravi Shankar | Kishore | Fabrication, Microstructure and Mechanical Behavior of Epoxy-Microballoons System (Studies on Fractography and Content, Size Distribution and Surface Modification of Microballoons) |
| Rajdip Mukherjee | Abinandanan T. A. | Precipitate Growth Kinetics: A Phase Field Study |
| Sandeep Namadev Kamble | Ramamurty U. & D. V. Kubair (AE) | Indentation Strength of Piezoelectric Ceramics |
2004
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Rejin Raghavan | Ramamurty U. | Structural Relaxation and Crystallization in a Pd40Cu30Ni10P20 Bulk Metallic Glass. |
| Santonu Ghosh | Chokshi A. H. | Influence of Silica on the Compressive Creep Behaviour of 3 mol% Yttria Stabilized Tetragonal Zirconia Polycrystals. |
| N. Suresh | Ramamurty U. | Aging Response and its effect on Mechanical Properties of Cu-Al-Ni Single Crystal Shape Memory Alloy |
| Sudarshan | Surappa M. K. | Processing and Characterization of Fly Ash Particle Reinforced A356 Al Composites |
| Sanjitarani Santra | Kishore | Fabrication of Epoxy Composites with CTBN and Fly Ash as Individual and Hybrid Fillers: Studies on Curing Schedule and Mechanical Properties under Static and Dynamic Loading Conditions |
| M. P. Lakshminarayana Rao | Govind S. Gupta | Physical and Mathematical Modelling of Boron Carbide Manufacturing Process |
2003
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Kisor Kumar Sahu | Lahiri A. K. | Void Distribution in Packed Bed: Mathematical Modeling and Experimental Study |
| S. P. Vijayalakshmi | Ashok M. Raichur | Improved Dewatering of Fine Coal by Vacuum Filtration using Microorganisms as Bioflocculants |
| Basavaraj M. G. | Govind S. Gupta | Determination of local Dispersion Co-efficient and Local Holdup in a Packed Bed by using X-rays |
| H. S. Jeevan | Ranganathan S. | Stable and Metastable Phases in Zn-Mg-Re (RE = Y, La, Gd and Dy) Alloys |
| Sangram Keshari Mohapatra | Jacob K. T. | Deoxidation Studies on the Systems M-Cr-O (M = Fe, Ni, Co) |
| Subray R. Hegde | Vikram Jayaram | Deposition of 8wt% Yttria Stabilised Zirconia Coatings by Flame Pyrolisis of Solution Precursor |
| P. Mahendiran | Surappa M. K. | Processing and Characterization of B4C Particle Reinforced 6061 AI Composites |
| L. Rangaraj | Vikram Jayaram & C. Divakar (Orgn.) | Reactive Hot Pressing of TiN-TiB2 Composites under Moderate Pressure and Temperature |
2002
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Subba Rao Mekala | Chokshi A. H. | An investigation of grain boundary sliding in a superplastic 7475 aluminum alloy |
| Saswata Bhattacharyya | Abinandanan T. A. | Ternary spinodal decomposition: Effect of interfacial energy |
| G. V. S. S. Prasad | Abinandanan T. A. | Effect of anisotropy in misfit on precipitate shape: A dynamical study |
| Suresh Chandra Parida (ER) | Jacob K. T. & V. Venugopal (BARC) | Thermodynamic studies on the systems Ln-Fe-O (Ln=Nd, Sm, Dy) |
| Saumyadeep Jana | Kamanio Chattopadhyay & Ramamurty U. | Subsurface Deformation during Indentation of Bulk Metallic Glasses |
2001
| Student | Advisor(s) | Thesis title |
|---|---|---|
| M. N. Chandraprabha | Natarajan K. A. | Studies on bio-oxidation of a refractory gold containing sulphide concentrate with respect to optimization and modelling |
| Evvie Chockalingam | Subramanian S. | Studies on biodegradation of organic flotation collectors using bacillus polymyxa |
| Ghatty S. S. R. K. Sastry | Lahiri A. K. | Cold model study of formation and breaking of raceway |
| V. Sivakumar | Subodh Kumar | Processing characterization and evaluation of functionally graded Al-4.6% Cu alloy |
| S. Swaminathan | Vikram Jayaram | Processing and characterisation of bulk Al203 p / AIN-Al composites by pressureless infiltration |
| Jayasree Thomas | Subramanian S. & M. S. Riyazulla (IBM) | Studies on the recovery of cobalt from Kalyadi copper tailings |
| A. R. Shashikala | Ashok M. Raichur | Role of interfacial phenomena in bioprocessing of minerals using Bacillus polymyxa |
| P. Dilli Babu Naidu | Dwarakadasa E. S. | Development of a thermomechanical treatment for optimizing properties of an indigenous 7010 aircraft alloy |
| B. R. Anand | Sastry D. H. | Effect of aluminum content on the creep resistance of FeAl |
| Hemamalini Thyagarajan | Subramanian S. & Natarajan K. A. | Studies on the bioremoval of hexavalent and trivalent chromium using Bacillus Polymyxa |
| D. Sreelakshmi Desai | Kishore | Mechanical and micrographic studies in oxide and short fibre bearing Epoxy system in dry and wet state. |
2000-1991
2000
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Sheikh Manjura Haque | Jacob K. T. | Thermodynamics of alloys with strong interactions |
| M. P. Gururajan | Abinandanan T. A. | Mean field study of point defects in B2-NiAI |
| N. R. Sathya Swaroop | Chokshi A. H. | Processing and high temperature deformation of pure and magnesia doped alumina |
| N. V. Ravi Kumar | Dwarakadasa E. S. | A study of spray atomized and deposited hypereutectic Al-20Si alloy |
| Victoria Bhattacharya | Kamanio Chattopadhyay | Study of friction and wear behaviour of nanoembedded aluminium alloys |
1999
| Student | Advisor(s) | Thesis title |
|---|---|---|
| T. Balasubramani | Ranganathan S. | Metastable phases in Al-Cr alloys with ternary and quaternary additions |
| J. Vijay Kumar | Surappa M. K. | Processing And characterization of cast 6061 Al-tin metal matrix composites |
| Indira Ravindran | Subramanian S. & M. S. Riyaz Ulla | Beneficiation studies on molybdenite ore from Harur area, Tamil Nadu |
| A. C. Niranjanappa | Dwarakadasa E. S. & K. Ramchand | Characterisation of radar transparent PMC A-sandwich radome panel through oven curing |
| C. S. Karthikeyan | Kishore | Processing and characterisation of fibre-free and fibre-bearing syntactic foams |
1998
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Punit Gupta | Lahiri A. K. | Cold model study of raceway |
| Sharad Chandra Sharma (ER) | Kamanio Chattopadhyay & B. C. Pai | Indigenous development of a constant modulus alloy for hemispherical resonating gyroscope: processing, properties and performance |
| B. Sudhir | Chokshi A. H. | Compressive creep characterization of polycrystalline 8 mol% yttria stabilized cubic zirconia |
| H. Ramanarayan | Abinandanan T. A. | Determination of phase diagrams of model alloy systems: A Monte Carlo study |
| C. Sanjivi | Ranganathan S. & Lahiri A. K. | Modelling and characterization of spray formed 7075 aluminium alloy and a composite with Al2O3. |
1997
| Student | Advisor(s) | Thesis title |
|---|---|---|
| S. Maiti | Abinandanan T. A. | Study of surface ordering and disordering |
| G. S. Avadhani | Prasad Y. V. R. K. | Warm working behaviour of alpha-iron, Fe-Ni alloys: A Study using processing maps |
| Abha Kumari | Natarajan K. A. | Electrobioleaching of chalcopyrite floatation concentrate |
| P. S. Shankar | Dwarakadasa E. S. | Near threshold fatigue crack growth study under mixed mode (I-II) loading (2014-T651 aluminium alloy) |
| Saki Krishnamurthy | Chokshi A. H. & Ranganathan S. | An investigation of the densification and sinter forging characteristics of alumina- yttria composites |
| S. Chirpa Selvi | Natarajan K. A. | Electrobioleaching of sphalerite flotation concentrate |
| D. Santhiya | Natarajan K. A. & Subramanian S. | Surface chemical studies on alumina suspensions using polymeric additives |
| Sandeep R. Shah | Chokshi A. H. | An investigation on the densification and sinter-forging characteristics of Al2O3-MgO composites |
1996
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Sandip Bysakh | Kamanio Chattopadhyay & P. K. Das | Development of laser ablation technique for production of intermetallic thin film and application to Al-Fe |
| K. S. Balakrishnan | Dwarakadasa E. S. & Ganguly C. | A comparative study on the evaluation of fracture toughness by using Charpy impact & tension test specimens (AlSl 403) |
| Dheepa Srinivasan | Kamanio Chattopadhyay | Growth morphology and coarsening of metastable Al3 Zr in Melt spun Al-Ni-Zr alloys |
| S. Sundararajan | Dwarakadasa E. S. & R. Mahadevan | Particulate aluminium matrix composite material (Al-12 Si-SiCp) for I.C engine piston application |
| S. Ganapathi Sharma | G. N. K. Iyengar & G. R. Nagabhushana | Studies on bulk breakdown behaviour of zinc oxide based composites |
1995
| Student | Advisor(s) | Thesis title |
|---|---|---|
| R. Asuvathraman | Mallya R. M. & C. K. Mathews | Surface characterization of uranium monocarbide using XPS, SIMS and XRD |
| K. Ananthasivan | Jacob K. T. & C. K. Mathews | Carbon potentials in ternary systems U-M-C (M-Mo,W,Cr) |
1994
| Student | Advisor(s) | Thesis title |
|---|---|---|
| N. Krishnan | Ranganathan S., Lahiri A. K. & S. Seshan (ME) | Simulation of microstructural evolution during grain growth and recrystallization |
| S. Anthonysamy | Jacob K. T. & C. K. Mathews | Carbon potential in U-Pu-C-O-N system measurements and calculations |
| M. Ravi | Dwarakadasa E. S. & B. C. Pai (RRL, Thiruvananthapuram) | Structure - property correlation studies of rare earth additions to Al-7Si-0.3 Mg alloy |
1993
| Student | Advisor(s) | Thesis title |
|---|---|---|
| R. S. Sundar | Sastry D. H. | Creep behaviour of Ti-24 Al-11Nb alloy |
| C. Mani | Kishore, C. R. L. Murty (AE) & V. P. Raghupathy (WRI) | A study on generation and characterisation of transverse and longitudinal cracks in thick weldments |
| A. Ajay Kumar | Kishore | Thermal, mechanical and non-destructive characterization of carbon-carbon composites |
| Madhavi Gurram | G. N. K. Iyengar & G. R. Nagabhushana (HVE) | Development of a new bulk breakdown device based on a zinc oxide composite for low voltage surge suppression |
| Jaydeep Sarkar | Surappa M. K. | The constitutive flow behaviour of Al 6061-SiCp MMCs and related relaxation restoration mechanisms during hot deformation |
| N. Ravi Shankar | Kamanio Chattopadhyay | Early stage plate growth in Cu-Zn Alloys - an attempt at the resolution of the bainite controversy |
1992
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Sunil Kaushal | Kishore | Studies on mechanical behaviour, fracture toughness evaluation and fractographic analysis of carbon and rubber modified epoxy matrix reinforced with glass fibres |
| Kalyan Kumar Das | Natarajan K. A. & Pradip (TRDDC) | Electrokinetic investigations on the oxidation of chalcopyrite |
| P. Krishna Sagar | Prasad Y. V. R. K. & M. L. Bhatia (DMRL) | Processing maps for hot working of the intermetallic alloy Ti-24Al-11Nb |
| S. P. Dhandapani | Surappa M. K. | Studies on the growth of Al2O3/Al composite into SiC preforms and preliminary studies on the processing of intermetallic matrix composites |
| T. V. Vijaya Kumar | U. B. Nayak & Mallya R. M. | Studies on oil flotation of wolframite |
| Kishore Kapila | K. S. Raman & Sastry D. H. | Creep and impact studies on some steel weldments |
| H. R. Muralidhar | Vikram Jayaram | Al2O3/Al composites from Al-Zn alloys : Growth and infiltration mechanisms |
| G. Srinivasa Rao | U. B. Nayak & Mallya R. M. | Selective flotation of serpentine from magnesite |
| S. Vana Varamban | Jacob K. T. & C. K. Mathews (IGCAR) | Thermodynamics of sodium-indium, indium-lead and indium-antimony alloys |
1991
| Student | Advisor(s) | Thesis title |
|---|---|---|
| K. Padmanabhan | Kishore | Flexural behaviour of unmodified and modified fibre reinforced epoxy based composites |
| K. Surnarayana Murthy | Natarajan K. A. | Bioleaching of a lean grade chalcopyrite ore - Studies on amenability and mechanisms |
| S. Muzhumathi | Sastry D. H. & K. I. Vasu (CECRI) | Corrosion behaviour of equiatomic Nickel-Titanium alloy in 3.5% Nacl, 89 % Conc. H3PO4 and extra-cellularbiofluids. |
| D. Gupta | Lahiri A. K. | Study of fluid flow in a continuous casting mould |
1990-1981
1990
| Student | Advisor(s) | Thesis title |
|---|---|---|
| R.Veeraraghavan | K. S. Raman & V. P. Raghupathy (BHEL) | Effect of welding conditions on the critical cracking stress and determination of critical restraint intensities of a high tensile steel |
| T. R. Govindan Kutty | Sastry D. H. & Ganguly C. (BARC) | Creep studies on metallic nuclear fuels (U, U-5% Zr, U-10% Zr) |
1989
| Student | Advisor(s) | Thesis title |
|---|---|---|
| C. S. Gundewar | Natarajan K. A. & U. B. Nayak | Grinding media wear studies with respect to Kudremukh Iron ore |
| N. Jyothi | Natarajan K. A. | The role of galvanic interactions in the bioleaching of mixed sulphides |
| R. Goswami | M. Mohan Rao | Lengthening kinetics of alpha plates in Ti-5.9% V alloy |
| S. Murali | K. S. Raman & K. S. S. Murthy (ME) | Ageing characteristics of aluminium-7 % silicon-0.3% magnesium casting alloy with cadmium trace addition and iron impurity |
1988
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Durga Subramanian | U. B. Nayak | Optimization studies on molybdenite flotation |
| R. J. Deshpande | U. B. Nayak | Beneficiation studies on low grade tungsten deposits of Degana, Rajasthan |
| Vathsala | Natarajan K. A. | Electrochemical aspects of grinding media wear with reference to base metal sulphides |
| K. Asok Kumar | K. S. Raman & A. N. Dwarakan (WRI) | Development of a friction welding quality control monitor and its evaluation for carbon steel to WRI) carbon steel and steel to aluminium welding |
| A. K. S. Kalyan Kumar | Prasad Y. V. R. K. & Kishore | Criteria for predicting metallurgical instabilities in processing |
| J. N. Buzruk | Sastry D. H. | Impression creep behaviour of weldments and rate controlling mechanism of plastic flow of AISI SS 316 at high temperatures |
| D. N. Drakshayani | Mallya R. M. | Reactivity of solids-reduction of some transition metal oxides and of marine manganese nodules by hydrogen |
1987
| Student | Advisor(s) | Thesis title |
|---|---|---|
| A. W. Bhagwat | M. Mohan Rao | Phase transformations in a Ti-7.9 at %Nb alloy |
| K. Raviprasad | Kamanio Chattopadhyay | Studies on rapidly solidified iron-silicon alloys |
| D. S. Srinath | Dwarakadasa E. S. | Corrosion behaviour of high strength Cu-9Ni-6Sn and Cu-9Ni-6Sn-1Al spinodal alloys in 3.5% NaCl |
| K. Vijayaraju | Dwarakadasa E. S. | Role of excess vacancies in the ductile fracture of aluminium |
| Debashis Dutta | Kamanio Chattopadhyay & C. G. K. Nair (HAL) | Development and evaluation of silicon carbide particulate reinforced aluminium composites |
1986
| Student | Advisor(s) | Thesis title |
|---|---|---|
| D. P. Patil | U. B. Nayak | Selective flotation of scheelite and calcite |
| C. S. Lakshmi | Mallya R. M. & E. S. Rajagopal | Characterisation of rapidly solidified aluminium-iron alloys |
| N. R. Mandre | Natarajan K. A. | Environmental aspects in mining and processing of sulphide minerals |
| M. K. Yelloji Rao | Natarajan K. A. | Electrochemical aspects of sulphide mineral dissolution |
1985
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Asok Kumar Ray | Dwarakadasa E. S. & K. S. Raman | Influence of porosity and slag inclusions on the properties of 15CDV6 HSLA steel butt welds |
| Girish P. Ghate | K. S. Raman & K. S. S. Murthy (ME) | Effect of minor element and trace addition on ageing characteristics and solidification behaviour of the Al-1.7Si-0.3Mg casting alloy |
1984
| Student | Advisor(s) | Thesis title |
|---|---|---|
| D. Vaman Rao | U. B. Nayak | Beneficiation of low grade Mussorie phosphate ore by flotation |
| V. I. Gopikrishnan | K. I. Vasu | Oxidation and tarnishing of aluminium-silicon bronzes - a study with respect to architectural applications |
| P. N. Girija Shankar | K. I. Vasu | Inhibition of corrosion of mild steel in acid media - galvanostatic and potentio-static polarisation studies |
1982
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Gouthama | Kishore | Effect of trace addition of tin on the isothermal and di-isothermal ageing characteristics of aluminium-0.45 magnesium-0.26 silicon alloy (Hardness, Resistometric and Microscopic studies) |
| P. Gopalan | Dwarakadasa E. S. & Kishore | Dynamic stress corrosion cracking studies in aged Al-5Zn-4Mg and Al-5Zn-4Mg-0.01Be alloys |
1981
| Student | Advisor(s) | Thesis title |
|---|---|---|
| K. R. Narendranath | Dwarakadasa E. S. | Influence of beryllium addition on the age hardening, deformation and fracture characteristics of aluminium-5 zinc-4 magnesium alloy |
| D. Suresh | P. K. Rohatgi & Kishore | Solar furnace for melting metals and alloys |
1980-1971
1979
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Prabhakar Sastri | G. N. K. Iyengar | Energy analysis of aluminium extraction in India |
1974
| Student | Advisor(s) | Thesis title |
|---|---|---|
| P. Suryanarayanan | M. Mohan Rao | Studies on the isothermal decomposition of a copper-27 wt% Sn alloy |
| B. L. Padma | Mallya R. M. | Electrical resistivity studies in quenched Al-Mg alloys |
| Rajiv Kohli | K. I. Vasu | Oxidation of zirconium alloys |
| D. R. Nagaraj | K. I. Vasu | Electro-hydrometallurgical recovery of copper from chalcopyrite concentrates |
1971
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Satish Mishra | K. I. Vasu | Age-hardening and related properties of aluminium magnesium alloys |
1970-1961
1968
| Student | Advisor(s) | Thesis title |
|---|---|---|
| S. Sreenivasa Rao | Anantharaman T. R. | Structural changes in copper zinc alloys |
1967
| Student | Advisor(s) | Thesis title |
|---|---|---|
| M. S. Jayaram | K. P. Abraham | Studies on the chloridisation of low grade ferruginous manganese ores |
1966
| Student | Advisor(s) | Thesis title |
|---|---|---|
| M. Murali Mohan Rao | K. P. Abraham | Studies on the roasting of sphalerite concentrate |
| C. R. Krishna Murthy | J. Balachandra | Electrodeposition of copper tin alloys from the fluoborate bath |
| E. S. Dwarakadasa | Krishnan A. A. | Interface energy studies in some copper alloys containing a liquid phase |
| K. S. Raman | Krishnan A. A. | Studies on the spreading power of some solders |
1964
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ramana Rao A. V. | Krishnan A. A. | Preparation of copper by some powder metallurgical techniques |
1963
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ramesam J. | Anantharaman T. R. | Development of age-hardenable alloys from Indian aluminium |
| Ramamurthy R. K. | Krishnan A. A. | Studies on vermiculite and its beneficiation |
| Manjunath Pai K. | Malikarjunan R. & Krishnan A. A. | Studies on some fatty acid collectors in the flotation of beach-sand minerals of Travancore |
1960
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Aswath H. S. | Krishnan A. A. | Studies on the measurement of contact angle and spreading power of tin and tin-lead solders on copper in presence of fluxes |
A. I. I. Sc.
1956-1951
1956
| Student | Advisor(s) | Thesis title |
|---|---|---|
| M. Mohan Rao | Brahm Prakash | Studies on the direct reduction of zinc sulphide with manganese and ferro-manganese |
| Nayak U.B. | Brahm Prakash | Soap flotation of zircon, rutile, monazite, quartz and ilmenite |
1954
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Udupa K. G. | Balachandra J. | Electrowinning of zinc from Zawar concentrates |
1951
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Aravamuthan V. | Ghosh J. C. & Ghosh S. S. | Studies on the reaction between carbon and sulphur at high temperatures with special reference to the production of carbon disulphide and desulphurization of Assam coal |
M. E. (Integrated)
2000-1991
2000
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Santanu Goswami | Lahiri A. K. | Study of flow of granular solids in a reduction shaft |
| Rajneesh S. | Govind S. Gupta | Mathematical modelling of stresses in the raceway region of the blast furnace |
| Easwar K. | Abinandanan T. A. | Comparative study of precipitation transformation for two different models : A Monto Carlo study |
| Sushil Kapoor | Subodh Kumar | Analysis of phases in model 1200 Al series alloys |
| Shashank Priya | Jacob K. T. | Thermodynamics of alloys : Bulk and surface) |
| Mainak Biswas | Kamanio Chattopadhyay | Studies on reaction ball milling of aluminium and copper sulphate pentahydrate system |
1999
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Arnab Chaudhuri | Govind S. Gupta | Modeling and simulation of the carburizing process under industrial conditions |
| Vishnukumar T. S. | Kamanio Chattopadhyay | Deposition and characterization of multilayers of Bismuth and amorphous Al-Fe-Si-system by electron beam evaporation technique |
| Bharat Bhushan | Lahiri A. K. | Simulation of reduction kinetics of iron ore in reduction shaft of corex process |
| Balasubramanian K. R. | Vikram Jayaram | Low temperature synthesis of Yttrium aluminate powders and films via spray pyrolysis route |
| Rajesh M. | Abinandanan T. A. | Precipitation transformation in ternary systems: A Monte Carlo study |
| Arun U. | Kishore | Drop weight instrumented impact test and post impact studies on syntactic foam core sandwich materials |
| Santosh Shanmukh | Chokshi A. H. | Cavitatation during high temperature tensile deformation of fine-grained 3mol% Yttria stabilized tetragonal zirconia |
| Ram Shankar L. | Krupanidhi S. B. & Surappa M. K. | Fabrication of bismuth layered ferroelectric thin films for NVRAM applications |
1998
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Prakash K. H. | Surappa M. K. | High temperature deformation behaviour of A356 alloy and A356+25 volume % SiCp composite |
| Pavan Kumar Suri | Dwarakadasa E. S. | Simulation and modelling to predict the effect of pitting corrosion (Aircraft alloy DTD 2024) |
| Kumar M. | Vikram Jayaram | Surface modification of Al2O3/SiCp/Al composite and hot pressing of Al2O3/SiC whiskers |
| Ravi Aggarwal | Chokshi A. H. | Compressive creep of hot-pressed Yttria |
| Ramashankar Singh | Lahiri A. K. | Corex process : One-dimensional steady state model of melter gasifier |
| Balaji S. | Hajra J. P. | Optimization of the synthesis, and dielectric spectroscopy of the relaxor ferroelectric PMN-PT |
| Balachandran R. | Kamanio Chattopadhyay | Laser surface alloying of nickel on aluminium substrate |
| Anand R. | Abinandanan T. A. | Spinodal microstructures in ternary systems – A Monte Carlo study |
| Pranava B. | Kishore | Post-impact mechanical properties of glass-epoxy laminates |
| B. Anand | Dwarakadasa E. S. | Development of a novel thermomechanical treatment for DTD 7010 aircraft alloy |
| Shalin Garg | Raman K. S. | Studies on squeeze cast copper-chromium alloys |
| L. N. Venkataraman | Hajra J. P. | Thermodynamic modelling of quaternary Al-Ga-In-As system |
1997
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Nilanjana Bhattacharyya | Kamanio Chattopadhyay | Investigation of synthesis of metallic foams by powder metallurgy route |
| Rakesh Misra | Kishore | Deformation behavior of Al2O3/Al composite at elevated temperatures |
| Venugopalan V. | Lahiri A. K. | Corex Process: One-dimensional steady state model of melter gasifier |
| Arvind Kumar S. | Abinandanan T. A. | Spinodal Microstructures: A Monte Carlo Study |
| Pankaj | Dwarakadasa E. S. | Deformation of large size aluminium-7010 billets modeling of the deformation behaviour |
| Sankaran P. V. | Dwarakadasa E. S. | Modeling and simulation of the deposit formation stage in spray deposition process |
| Keshav Kumar | Kishore | Effect of filler addition on the mechanical properties of epoxy resin |
| Chitra K. | Prasad Y. V. R. K. | A study of hot deformation mechanism in copper-nickel system using processing maps |
| Sriram K. S. | Jacob K. T. | Antiferroelectric lead zirconate thin films fabricated using ion beam sputter deposited multilayer structures |
| Nanda Nandan R. | Ranganathan S. | Characterization of interfaces in discontinuously reinforced Al-Mg-Zn/SiCp and Al/Si3N4 composites |
| John Immanuel Paul | Subramanian S. | Effect of HF Pretreatment on the Mechano-chemical Extraction of copper, cobalt and nickel from leached manganese nodules residue and adsorption of copper using red mud |
| Rohit Shukla | Vikram Jayaram | Surface modification of SiC/Al2O3/Al Dimox composites and hot pressing of SiCw/Al2O3 composites |
1996
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Amaresh | Chokshi A. H. | A study of the mechanisms and the microstructural aspects of superplasticity in Al-33wt%Cu eutectic alloy |
| Sunil Khatri | Raman K. S. and Seshan S. (ME) | Production and characterisation of squeeze cast 70 : 30 brass |
| P. Padma Priya | Abinandanan T. A. and Vikram Jayaram | Coarsening characteristics of Al-Al2O3 composite produced by directed metal oxidation process |
| Ganesh V. | Dwarakadasa E. S. | Effect of zirconium on microstructure, thermal aging and wear behaviour of the Al-Si IC engine piston alloys |
| Suvro Upadhyay | Ranganathan S. | Microstructural evolution during mechanical alloying of Ti-Ni-Al system |
| Balaji Venkateswaran | Hajra J. P. | Thermodynamic modeling of quaternary systems |
| Sesha Sayee R. | Subramanian S. | Mechano-chemical extraction of metal values from leached manganese nodules residue |
| Venkatraman S. | Kishore | Characterization of static and dynamic behaviour of foam containing glass epoxy laminates |
| Mukund U. | Lahiri A. K. | Physical modelling of the reduction shaft of the Corex process |
| Mythreyi S. | Abinandanan T. A. | A comparison of the micro-structural evolution predicted by the nucleation theory, with a Monte Carlo experiment |
| Srinivas V. | Dwarakadasa E. S. | Fracture toughness and wear behaviour of high strength aluminium alloys |
| Surya K. Bhattacharji | Kishore | Influence of PTFE fillers on the strength and fracture features of glass epoxy composites |
| Rajive Prakash Upadhyay | Prasad Y. V. R. K. | A study of the hot working characteristics of the 6201 alloy using processing map |
1995
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Arun Srinivasan | Kishore | Effect of moisture on the physical and mechanical properties of glass-epoxy composites |
| Balaji B. | Kishore | Effect of PTFE additions on the shear related behavior of Glass-epoxy composites |
| Srinivasa Murthy D. | Prasad Y. V. R. K. | Hot deformation behaviour of Al2O3/AlN/Al composite |
| Sudhakar A. N. | Subramanian S. | Thermogravimetric and vibration milling studies on leached manganese nodules |
| Saravanan A. | Vikram Jayaram | Wet processing and consolidation of SiCp – Al2O3 composites |
| Sibandu Mukherjee | Lahiri A. K. | Mathematical model of Argon-Oxygen-Decarburisation process |
| Bidyut Kumar Pattanayak | Dwarakadasa E. S. | Effect of silver addition on the deformation and corrosion behaviour of aluminium lithium alloy (1441) |
| Chandrashekar V. S. | Dwarakadasa E. S. | Spray forming of Al-Zn-Mg (7075) alloy and characterization of the resultant ingot |
| Balasubramanian I. | Abinandanan T. A. | Computational study of phase diagrams and phase transformations in binary alloys |
| Jayaram S. | Surappa M. K. | Studies on co-extrusion of SiCp reinforced aluminium matrix composites |
| G. Finney David | Ranganathan S. & Kamanio Chattopadhyay | Directional Solidification of a ternary monotectic system: Indium-Lead-Zinc |
| Sundharajan P. | Surappa M. K. | Dry sliding wear of AZ91 Mg-SiCp metal matrix composites |
1994
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Jose Martin Korath | Lahiri A. K. | Computer simulation of submerged arc furnace process for production of ferro manganese |
| Sankarasubramanian R. | Ranganathan S. | Synthesis of niobium aluminides through novel processing routes |
| S. Muthukkaruppan | Raman K. S. | Semi-solid casting and forging of Al-7Si-0.3Mg alloy |
| Arun Kumar B. | Surappa M. K. | Processing and characterization of magnesium based (AZ91)-SiCp composites |
| Sridharan L. | Kamanio Chattopadhyay | Evolution of microstructure in unidirectionally solidified zinc-lead monotectic alloy |
| Murali Menon | Kishore | Aramid fiber reinforced epoxy composite – A tribological study |
| Sujeeth A. | Mallya R. M. | Nanophase materials: ultrasonic gas atomization and mechanical alloying |
| Divakar M. | Hajra J. P. | Thermodynamics of surfaces and adsorption in ternary systems |
| Subhankar Choudhury | Subramanian S. | Flotation studies on magnesite and serpentine |
| Sandeep Kumar | Vikram Jayaram | Role of SiC pre-oxidation and alumina coating in processing of SiC/Al2O3/Al ceramic matrix composites |
| Monsur Ali Mondal | Dwarakadasa E. S. | Fatigue behaviour of HE 15A aluminium alloy (Fatigue, fracture toughness, corrosion and stress corrosion studies) |
| Siva Kumar N. R. | Subramanian S. | Selective flotation of sphalerite from galena using dextrin |
1993
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Ravi C. S. | G. N. K. Iyengar | Simultaneous removal of sulphur and phosphorous in En – steel |
| Srinivasan B. | Ranganathan S. | Reactive sintering of Ni3Al and Ni3Al based composites to near full densities |
| Jayaprakash T. | Mallya R. M. | Mechanical alloying of Al-Fe-V-Si system and its composite for aerospace applications |
| Rajaram R. | Prasad Y. V. R. K. | Processing maps for hot Working of cadmium and cadmium – 1% zinc alloy: correlations with microstructure |
| Sankararaman S. | Lahiri A. K. | Modelling and simulation of continuous casting tundish |
| Joe Michael E. | Vikram Jayaram | Role of solute elements and alumina coated SiC particulates on |
| Rama C. | Jacob K. T. | Microscopic thermodynamics of multi-component oxide ceramics |
| Jagannadham Chetty P. V. | Raman K. S. | Effect of solidification parameters (DAS and CPUA) and heat treatment variables on mechanical properties of Al-7 Si-0.3 Mg (LM 25) cast alloy |
| Harsha Kumar Srivatsa V. V. | Lahiri A. K. | Simulation of turbulent fluid flow in continuous casting mould |
| Ramanathan S. | Kishore | Drop weight instrumented impact tests and post-impact studies on glass/epoxy laminates |
| Sanjeev T. | Kamanio Chattopadhyay | Investigation on possible phase formations during metatectic and peritectic reactions in Cu-Sn Alloys |
| P. Nagarajan | Dwarakadasa E. S. | Design of spray forming unit for MMC production |
| S. Ravindra Reddy | Hajra J. P. | Thermodynamic models of ternary systems and applications |
| Manish Narayan | Surappa M. K. | Dry sliding wear of 2024 Al-Al O metal matrix composites |
| Gayathri P. V. | Sastry D. H. | Creep behaviour of particulate reinforced 6061 Al composites |
1992
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Biswajit Tripathy | Kamanio Chattopadhyay | Microstructural evolution in near eutectic Al-Co alloy |
| Kannan S. | Jacob K. T. | Thermodynamic analysis of antimony removal from copper |
| Giridhar R. | Surappa M. K. | Studies on ageing and its effect of impact fracture behaviour of 2024 Al-alumina composites |
| Ramkumar Viswanathan | Bhat M. V. | Effect of microstructure on the corrosion behaviour of SAE 4340 steel in sodium chloride solution |
| Bikash Ranjan Panda | Natarajan K. A. | Biocorrosion of stainless steel in the presence of Thiobacillus ferrooxidans |
| Arun Kumar S. | Mallya R. M. | Mechanical alloying of Al-Fe by impact milling |
| Jaideep Kumar Srivastava | Raman K. S. | Microstructural studies on Mn, Cr, Co – b phases in Al-7 Si-0.3 Mg casting alloy |
| Brainerd Samuel S. D. | Vikram Jayaram | Processing of MMCs/CMCs by directed melt nitridation |
| Sainathan N. | Kishore | Influence of particulate graphite additions on shear related behaviour of glass fibre reinforced epoxy composites |
| Sunitha A. B. | Sastry D. H. | Creep of alloys based on Ni3Al |
| Viswanathan N. N. | Lahiri A. K. | A 2-D static model to simulate gas flow and temperature-composition profiles inside blast furnace |
| Fredric D. Suresh | G. N. K. Iyengar | Influence of microstructure on the wear properties of electroslag refined EN 24 steel |
| Venkatakrishnan S. | Ranganathan S. | Fabrication and properties of carbon-carbon composites |
| Sriram Rangarajan | Dwarakadasa E. S. | Creep forming of precipitation hardenable aluminium alloys |
1991
| Student | Advisor(s) | Thesis title | |
|---|---|---|---|
| Balakrishnan M. V. | Ranganathan S. | Microstructural characterisation of laser treated Al-Cu eutectic and | Al-Co hyper-eutectic alloys |
| Matheswaran M. | Kishore | Some studies on the thermoplastic modified epoxy based glass reinforced composites | |
| Raj Mohan N. | Jacob K. T. | Application of thermodynamics to conceptual design and analysis of processes | |
| Ramesh N. | Dwarakadasa E. S. | Study of adhesive wear in aluminium-lithium alloy 8090 | |
| Sur Chaudhury R. K. | Lahiri A. K. | Experimental studies on nozzle blockage phenomenon in continuous casting | |
| Gopal H. | Vikram Jayaram & Kamanio Chattopadhyay | On the estimation of binding energy of a-Al2O3 | |
| Sitakanta Hotta | Raman K. S. | Analysis of the fracture toughness testing procedure using short rod/bar chevron notch specimen | |
| Sivakumar P. | Surappa M. K. | Fabrication of 2024 aluminium- alumina composites and their toughness evaluation by instrumented impact | |
| Sanal Kumar S. | Vikram Jayaram | Aerodynamic levitation for undercooling studies on ceramics | |
| Prashant Deepak | Mallya R. M. | Spray forming : Design of spray deposition laboratory unit for metal-matrix composites | |
| Nagi Reddy V. | Sastry D. H. | Effect of heat treatment on the creep behaviour of an oxide dispersion strengthened ferritic steel |
M. E. (Manufacturing Engineering)
2002-2000
2002
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Pankaj N. Gangshettiwar | Lahiri A. K. | Simulation of squeeze casting using proCAST |
| Sreekanta Roy | Kamanio Chattopadhyay | Development of microstructure and tribological properties of Al-Si-Bi clad on Al-Si and Cu substrate |
| Sadhan Ghosh | Ranganathan S. | Synthesis and characterisation of iron based metallic glasses by mechanical alloying |
| Atul Kumar Malik | Raghavan N. R. S. | Padma: Parallel and distributed framework for manufacturing applications |
| Balraj Singh | Prasad Y. V. R. K. | Thermomechanical processing of 6000 series aluminium alloys |
| Ravikumar N. L. | Kishore | Effect of ingression by varying aqueous media on the compression behaviour of neat epoxy and epoxy containing fly ash particles with their surface treated by silane bearing material |
| Manoj Kumar | Hajra J. P. | Thermodynamics of ternary system involving higher order ternary interactions |
| Sonia Galgalikar | Ramamurty U. & Dwarakadasa E. S. | Effect of Ag addition on the mechanical properties of AZ91 alloy |
| Satya Pal Singh | Rengarajan R. (Widia India Ltd) & Vikram Jayaram | To find out suitable insert parameters for stainless steel turning |
| Binoda Bihari Behera | Surappa M. K. | Study of machinability characteristics of Al-Si-SiCp composites |
| Srinivas Singamala | Subramanian S. | Design of expeller for sealless centrifugal pumps |
| Sriram K. V. | Raghavan N. R. S. | Stochastic petri net approach for analysis and design of multi product supply chains |
2001
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Sudeep Prabhakar Ingole | Seshan S. (ME) | Study on the plaster of paris mould castings |
| Amit B. Nimje | Kishore | Effect of alloying additions, casting methods and heat treatment on the wear, erosion and impact properties of white cast irons |
| Patil Dipak Dumaji | Lahiri A. K. | Modelling of roll gap profile in hot strip mill using fem |
| Madhav Goswami | Dwarakadasa E. S. | Study of new heat treatment procedure on 7010 aeronatutical grade aluminium alloy |
| Ashis Chowdhury | Vikram Jayaram | Mathematical modelling of the mean flow stress of C-Mn steels during rolling and the prediction of rolling force |
| Jitesh Gopinath | Ranganathan S. | Laser surface hardening of EN 8, EN 19 and EN 31 steels |
| Budida Apparao | Raghavan N. R. S. (MS) | Integrated inventory and distribution management in a dynamic and stochastic setting |
| Biju S. | Satish Vasu Kailas & Pradip Dutta (ME) | Friction stir welding |
| Vimalahassan A. | Kishore | Study of mechanical behaviour of kevlar/glass hybrid composites |
| Suresh Kumar K. | Kamanio Chattopadhyay & Pradip Dutta (ME) | MIG welding of copper with mild steel filler material |
2000
| Student | Advisor(s) | Thesis title |
|---|---|---|
| Anirban Majumdar | Dwarakadasa E. S. | Fatigue crack growth and fracture toughness of 7010 extrusions |
| Bhanu Prasad E. | Srinivasan M. N. (ME) | Quality of near net process castings-hardness |
| Narasimha Reddy D. | Seshan S. & S. V. Kailas (ME) | Modelling liquid phase sintering of tungsten carbide-cobalt |
| Hemambar C. H. | Raman K. S. & Sastry D. H. | Low cost investment casting |
| Anupam Panwar | Vikram Jayaram | Combustion synthesis and consolidation of 3mol% YSZ |
| Subramanian S. | Raman K. S. | Experimental, analytical and numerical investigation of the effect of thickness ratio on the residual stress of kover/copper braze joint |