List of Publications (as on 1st March 2016)

[1] P. Kiruthika, S.K. Makineni, C. Srivastava, K. Chattopadhyay, and A. Paul. Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys. Acta Materialia, 105:438 - 448, 2016.
[ http ]
[2] Sherine Alex, Kamanio Chattopadhyay, and Bikramjit Basu. Tailored specular reflectance properties of bulk cu based novel intermetallic alloys. Solar Energy Materials and Solar Cells, 149:66 - 74, 2016.
[ http ]
[3] D. Arvindha Babu, Bhaskar Majumdar, Rajdeep Sarkar, B.S. Murty, and K. Chattopadhyay. On the structural stability of melt spun ribbons of Fe95−xZrxB4Cu1(x = 7 and 9) alloys and correlation with their magnetic properties. Metallurgical and Materials Transactions A, pages 1-12, 2015.
[ http ]
[4] Subhradeep Chatterjee, T.A. Abinandanan, G.Madhusudhan Reddy, and Kamanio Chattopadhyay. Microstructure formation in dissimilar metal welds: Electron beam welding of ti/ni. Metallurgical and Materials Transactions A, pages 1-8, 2015.
[ http ]
[5] R. Chetty, A. Bali, O.E. Femi, K. Chattopadhyay, and R.C. Mallik. Thermoelectric properties of in-doped cu2zngese4. Journal of Electronic Materials, pages 1-8, 2015.
[ http ]
[6] C.S. Tiwary, D. Vishnu, A.K. Kole, J. Brahmanandam, D.R. Mahapatra, P. Kumbhakar, and K. Chattopadhyay. Stabilization of the high-temperature and high-pressure cubic phase of zno by temperature-controlled milling. Journal of Materials Science, pages 1-12, 2015.
[ http ]
[7] Kirtiman Deo Malviya, Chandan Srivastava, and K. Chattopadhyay. Phase formation and stability of alloy phases in free nanoparticles: some insights. RSC Adv., 5:35541-35550, 2015.
[ http ]
[8] S. K. Sinha, C. Srivastava, S. Sampath, and K. Chattopadhyay. Morphology control synthesis of au-cu2s metal-semiconductor hybrid nanostructures by modulating reaction constituents. RSC Adv., 5:56629-56635, 2015.
[ http ]
[9] S. Manjura Hoque, S.K. Makineni, A. Pal, P. Ayyub, and K. Chattopadhyay. Structural and magnetic properties of ultra-small scale eutectic cofezr alloys. Journal of Alloys and Compounds, 620:442 - 450, 2015.
[ http ]
[10] S.K. Makineni, A. Samanta, T. Rojhirunsakool, T. Alam, B. Nithin, A.K. Singh, R. Banerjee, and K. Chattopadhyay. A new class of high strength high temperature cobalt based γ-γ co-mo-al alloys stabilized with ta addition. Acta Materialia, 97:29 - 40, 2015.
[ http ]
[11] Anshuman Nandy, C.S. Tiwary, A. Dutta, K. Chattopadhyay, and S.K. Pradhan. Effect of manganese (ii) oxide on microstructure and ionic transport properties of nanostructured cubic zirconia. Electrochimica Acta, 170(0):360 - 368, 2015.
[ http ]
[12] C.S. Tiwary, S. Kashyap, D.H. Kim, and K. Chattopadhyay. Al based ultra-fine eutectic with high room temperature plasticity and elevated temperature strength. Materials Science and Engineering: A, 639(0):359 - 369, 2015.
[ http ]
[13] Chandra Sekhar Tiwary, Sharan Kishore, Suman Sarkar, Debiprosad Roy Mahapatra, Pulickel M. Ajayan, and Kamanio Chattopadhyay. Morphogenesis and mechanostabilization of complex natural and 3d printed shapes. Science Advances, 1(4), 2015.
[14] ShaileshKumar Singh, K. Chattopadhyay, and Pradip Dutta. High-temperature workability of thixocast a356 aluminum alloy. Metallurgical and Materials Transactions A, pages 1-12, 2015.
[ http ]
[15] S.K. Makineni, B. Nithin, and K. Chattopadhyay. Synthesis of a new tungsten-free γ-γ cobalt-based superalloy by tuning alloying additions. Acta Materialia, 85(0):85 - 94, 2015.
[ http ]
[16] S.K. Makineni, B. Nithin, and K. Chattopadhyay. A new tungsten-free γ-γ co-al-mo-nb-based superalloy. Scripta Materialia, 98(0):36 - 39, 2015.
[ http ]
[17] Vidya Kochat, Chandra Sekhar Tiwary, Tathagata Biswas, Gopalakrishnan Ramalingam, Srinivasan Raghavan, Kamanio Chattopadhyay, Manish Jain, and Arindam Ghosh. Conductivity noise as a transport-based probe to study the charge-carrier transmission across grain boundaries in polycrystalline graphene. Bulletin of the American Physical Society, 60, 2015.
[18] C.S. Tiwary, B. Javvaji, C. Kumar, D.R. Mahapatra, S. Ozden, P.M. Ajayan, and K. Chattopadhyay. Chemical-free graphene by unzipping carbon nanotubes using cryo-milling. Carbon, 89:217 - 224, 2015.
[ http ]
[19] S. K. Sinha, C. Srivastava, S. Sampath, and K. Chattopadhyay. Tunability of monodispersed intermetallic aucu nanoparticles through understanding of reaction pathways. RSC Advances, 5:4389-4395, 2015.
[ http ]
[20] Shailesh K Singh, Prosenjit Das, Kamanio Chattopadhyay, and Pradip Dutta. Fracture property correlation of rheocast (ems) and thixocast 6061 aluminium alloy. In Solid State Phenomena, volume 217, pages 405-411, 2015.
[21] KirtimanDeo Malviya and Kamanio Chattopadhyay. High quality oxide-free metallic nanoparticles: a strategy for synthesis through laser ablation in aqueous medium. Journal of Materials Science, 50(2):980-989, 2015.
[ http ]
[22] C.S. Tiwary, S. Kashyap, and K. Chattopadhyay. Development of alloys with high strength at elevated temperatures by tuning the bimodal microstructure in the al-cu-ni eutectic system. Scripta Materialia, 93(0):20 - 23, 2014.
[ http ]
[23] C. S. Tiwary, S. Saha, P. Kumbhakar, and K. Chattopadhyay. Observation of combined effect of temperature and pressure on cubic to hexagonal phase transformation in zns at the nanoscale. Crystal Growth and Design, 14(9):4240-4246, 2014.
[24] Tiwary, Chandrasekhar, Gunjal, Vilas V., Banerjee, Dipankar, and Chattopadhyay, Kamanio. Intermetallic eutectic alloys in the ni-al-zr system with attractive high temperature properties. MATEC Web of Conferences, 14:01005, 2014.
[ http ]
[25] Kirtiman Deo Malviya and Kamanio Chattopadhyay. Synthesis and mechanism of composition and size dependent morphology selection in nanoparticles of ag-cu alloys processed by laser ablation under liquid medium. The Journal of Physical Chemistry C, 118(24):13228-13237, 2014.
[ http ]
[26] C. S. Tiwary, S. Chakraborty, D. R. Mahapatra, and K. Chattopadhyay. Length-scale dependent mechanical properties of al-cu eutectic alloy: Molecular dynamics based model and its experimental verification. Journal of Applied Physics, 115(20):Article no. 203502, 2014.
[ http ]
[27] Shailesh K. Singh, K. Chattopadhyay, G. Phanikumar, and P. Dutta. Experimental and numerical studies on friction welding of thixocast {A356} aluminum alloy. Acta Materialia, 73(0):177 - 185, 2014.
[ http ]
[28] K.S. Suresh, N.P. Gurao, Satyaveer Singh D., Satyam Suwas, K. Chattopadhyay, S.V. Zherebtsov, and G.A. Salishchev. Effect of equal channel angular pressing on grain refinement and texture evolution in a biomedical alloy Ti13Nb13Zr. Materials Characterization, 82(0):73 - 85, 2013.
[ http ]
[29] S. Chithra, K.D. Malviya, and K. Chattopadhyay. Structural evolution and phase stability of hume-rothery phase in a mechanically driven nanostructured ag-15 at. pct sn alloy. Metallurgical and Materials Transactions A, 45(3):1148-1160, 2013.
[ http ]
[30] PatanYousaf Khan, Victoria Bhattacharya, Krishanu Biswas, and Kamanio Chattopadhyay. Melting and solidification behavior of pb-sn embedded alloy nano-particles. Journal of Nanoparticle Research, 0(0):Article in Press, 2013.
[ http ]
[31] C S Tiwary, S Kashyap, and K Chattopadhyay. Effect of indium addition on microstructural, mechanical and oxidation properties of suction cast nb-si eutectic alloy. Materials Science and Technology, 29(6):702-709, 2013.
[ http ]
[32] S. Kashyap, C.S. Tiwary, and K. Chattopadhyay. Microstructural and mechanical behavior study of suction cast nb-si binary alloys. Materials Science and Engineering: A, 583(0):188 - 198, 2013.
[ http ]
[33] Chandan Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay. Tensile flow and work hardening behavior of hot cross-rolled {AA7010} aluminum alloy sheets. Materials Science and Engineering: A, 577(0):87 - 100, 2013.
[ http ]
[34] S. Manjura Hoque, C. Srivastava, V. Kumar, N. Venkatesh, H.N. Das, D.K. Saha, and K. Chattopadhyay. Exchange-spring mechanism of soft and hard ferrite nanocomposites. Materials Research Bulletin, 48(8):2871 - 2877, 2013.
[ http ]
[35] ChandraSekhar Tiwary, Akash Verma, Sanjay Kashyp, Krishanu Biswas, and Kamanio Chattopadhyay. Preparation of freestanding zn nanocrystallites by combined milling at cryogenic and room temperatures. Metallurgical and Materials Transactions A, 44(4):1917-1924, 2013.
[ http ]
[36] Chandan Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay. Effects of different modes of hot cross-rolling in 7010 aluminum alloy: Part ii. mechanical properties anisotropy. Metallurgical and Materials Transactions A, 44(6):2764-2777, 2013.
[ http ]
[37] Chandan Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay. Effects of different modes of hot cross-rolling in 7010 aluminum alloy: Part i. evolution of microstructure and texture. Metallurgical and Materials Transactions A, 44(6):2746-2763, 2013.
[ http ]
[38] Proloy Nandi, Satyam Suwas, Subodh Kumar, and Kamanio Chattopadhyay. The effect of minor addition of ni on the microstructural evolution and mechanical properties of suction cast al-0.14 at. pct sc binary alloy. Metallurgical and Materials Transactions A, 44(6):2591-2603, 2013.
[ http ]
[39] S. Kashyap and K. Chattopadhyay. Synthesis and phase evolution in nb/si multilayers obtained by sequential laser ablation. Thin Solid Films, 531(0):312 - 319, 2013.
[ http ]
[40] S.Manjura Hoque, C. Srivastava, N. Srivastava, N. Venkateshan, and K. Chattopadhyay. Synthesis and characterization of fe- and co-based ferrite nanoparticles and study of the T1 and T2 relaxivity of chitosan-coated particles. Journal of Materials Science, 48:812-818, 2013.
[ http ]
[41] S.K. Singh, K. Chattopadhyay, and P. Dutta. Friction welding of thixocast a356 aluminium alloy. Diffusion and Defect Data Pt.B: Solid State Phenomena, 192-193:305-310, 2013.
[ http ]
[42] S. Chakraborty, C.S. Tiwary, A.K. Kole, P. Kumbhakar, and K. Chattopadhyay. A simple method of synthesis and optical properties of mn doped zno nanocups. Materials Letters, 91:379-382, 2013.
[ http ]
[43] C.S. Tiwary, S. Kashyap, and K. Chattopadhyay. Effect of mg addition on microstructural, mechanical and environmental properties of nb-si eutectic composite. Materials Science and Engineering: A, 560(0):200 - 207, 2013.
[ http ]
[44] S. Kashyap, C.S. Tiwary, and K. Chattopadhyay. Microstructure and mechanical properties of oxidation resistant suction cast nb-si-al alloy. Materials Science and Engineering A, 559:74-85, 2013.
[ http ]
[45] K. Barai, C.S. Tiwary, P.P. Chattopadhyay, and K. Chattopadhyay. Synthesis of free standing nanocrystalline cu by ball milling at cryogenic temperature. Materials Science and Engineering A, 558:52-58, 2012.
[ http ]
[46] M. Palit, S. Pandian, and K. Chattopadhyay. Phase relationships and magnetic properties of tbxdy1-xfe1.95 alloys. Journal of Alloys and Compounds, 541:297-304, 2012.
[ http ]
[47] C.S. Tiwary, D. Roy Mahapatra, and K. Chattopadhyay. Effect of length scale on mechanical properties of al-cu eutectic alloy. Applied Physics Letters, 101(17), 2012.
[ http ]
[48] S. Roy, B.R. Nataraj, S. Suwas, S. Kumar, and K. Chattopadhyay. Microstructure and texture evolution during accumulative roll bonding of aluminium alloys aa2219/aa5086 composite laminates. Journal of Materials Science, 47(17):6402-6419, 2012.
[ http ]
[49] D. Prabhu, R. Veerababu, R. Balamuralikrishnan, A. Narayanasamy, and K. Chattopadhyay. Effect of addition of aluminum on the evolution of microstructure in hitperm class Fe44Co44Zr7B4Cu1 alloy. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 177(11):791-796, 2012.
[ http ]
[50] S.M. Hoque, S.S. Kader, D.P. Paul, D.K. Saha, H.N. Das, M.S. Rana, K. Chattopadhyay, and M.A. Hakim. Effect of grain size on structural and magnetic properties of CuFe2O4 nanograins synthesized by chemical co-precipitation. IEEE Transactions on Magnetics, 48(5 PART 2):1839-1843, 2012.
[ http ]
[51] S. Roy, B.R. Nataraj, S. Suwas, S. Kumar, and K. Chattopadhyay. Accumulative roll bonding of aluminum alloys 2219/5086 laminates: Microstructural evolution and tensile properties. Materials and Design, 36:529-539, 2012.
[ http ]
[52] C. Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay. Mechanical property anisotropy of 7010 aluminum alloy sheet having single rotated-brass texture. Materials Science Forum, 702-703:303-306, 2012.
[ http ]
[53] C. Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay. Thermal and mechanical stability of the single component rotated brass texture in a 7010 aluminum alloy. Materials Science Forum, 702-703:279-282, 2012.
[ http ]
[54] M. Palit, J.A. Chelvane, H. Basumatary, S. Banumathy, A.K. Singh, S. Pandian, and K. Chattopadhyay. Evolution of texture during directional solidification of giant magnetostrictive Tb0.3Dy0.7Fe1.95 alloy. Materials Science Forum, 702-703:876-879, 2012.
[ http ]
[55] C.S. Tiwary, A. Verma, K. Biswas, A.K. Mondal, and K. Chattopadhyay. Preparation of ultrafine cscl crystallites by combined cryogenic and room temperature ball milling. Ceramics International, 37(8):3677-3686, 2011.
[ http ]
[56] S. Kashyap, C.S. Tiwary, and K. Chattopadhyay. Effect of gallium on microstructure and mechanical properties of nb-si eutectic alloy. Intermetallics, 19(12):1943-1952, 2011.
[ http ]
[57] S. Roy, D. Satyaveer Singh, S. Suwas, S. Kumar, and K. Chattopadhyay. Microstructure and texture evolution during accumulative roll bonding of aluminium alloy aa5086. Materials Science and Engineering A, 528(29-30):8469-8478, 2011.
[ http ]
[58] C. Srivastava, S. Chithra, K.D. Malviya, S.K. Sinha, and K. Chattopadhyay. Size dependent microstructure for ag-ni nanoparticles. Acta Materialia, 59(16):6501-6509, 2011.
[ http ]
[59] G. Phanikumar, K. Chattopadhyay, and P. Dutta. Joining of dissimilar metals: Issues and modelling techniques. Science and Technology of Welding and Joining, 16(4):313-317, 2011.
[ http ]
[60] A. Verma, K. Biswas, C.S. Tiwary, A.K. Mondal, and K. Chattopadhyay. Combined cryo and room-temperature ball milling to produce ultrafine halide crystallites. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42(4):1127-1137, 2011.
[ http ]
[61] S. Chithra, S. Lele, and K. Chattopadhyay. Structure evolution and phase change in ag-5.1 at% bi alloy during mechanical alloying. Acta Materialia, 59(5):2009-2019, 2011.
[ http ]
[62] M. Palit, S. Banumathy, A.K. Singh, S. Pandian, and K. Chattopadhyay. Crystallography of solid-liquid interface and evolution of texture during directional solidification of Tb0.3Dy0.7Fe1.95 alloy. Intermetallics, 19(3):357-368, 2011.
[ http ]
[63] C. Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay. Formation of a single, rotated-brass {1 1 0}<5 5 6> texture by hot cross-rolling of an al-zn-mg-cu-zr alloy. Scripta Materialia, 64(5):446-449, 2011.
[ http ]
[64] S. Bysakh, K. Mitsuishi, M. Song, K. Furuya, and K. Chattopadhyay. Formation of amorphous xenon nanoclusters and microstructure evolution in pulsed laser deposited Ti62.5Si37.5 thin films during xe ion irradiation. Journal of Materials Research, 26(1):62-69, 2011.
[ http ]
[65] D. Prabhu, A. Narayanasamy, K. Shinoda, B. Jeyadeven, J.-M. Greneche, and K. Chattopadhyay. Grain size effect on the phase transformation temperature of nanostructured CuFe2O4. Journal of Applied Physics, 109(1), 2011.
[ http ]
[66] E. Thirumal, D. Prabhu, K. Chattopadhyay, and V. Ravichandran. Magnetic, electric and dielectric properties of feco alloy nanoparticles dispersed in amorphous matrix. Physica Status Solidi (A) Applications and Materials Science, 207(11):2505-2510, 2010.
[ http ]
[67] D. Sivaprahasam, A.M. Sriramamurthy, M. Vijayakumar, G. Sundararajan, and K. Chattopadhyay. Synthesis of fecu nanopowder by levitational gas condensation process. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 41(4):841-856, 2010.
[ http ]
[68] S. Mondol, G. Praveen, S. Kumar, K. Chattopadhyay, and S. Suwas. Effect of addition of sc and mg on 2219 aluminum alloy. In S. Kumai, O. Umezawa, Y. Takayama, T. Tsuchida, and T. Sato, editors, Proceedings of the 12th International Conference on Aluminum Alloys, ICAA 12, pages 447-452. The Japan Institute of Light Metals, Japan, 2010.
[69] E. Thirumal, D. Prabhu, K. Chattopadhyay, and V. Ravichandran. Synthesis, magnetic and electrical properties of fe-containing SiO2 nanocomposite. Journal of Alloys and Compounds, 502(1):169-175, 2010.
[ http ]
[70] K. Chattopadhyay and S. Ranganathan. P. ramachandra rao (1942-2010). Current Science, 98(7):973-974, 2010.
[ http ]
[71] K. Biswas and K. Chattopadhyay. Microstructural evolution during laser resolidification of fe-18 at. pct ge alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(3):574-582, 2010.
[ http ]
[72] C.S. Tiwary, P. Kumbhakar, A.K. Mitra, and K. Chattopadhyay. Synthesis of wurtzite-phase zns nanocrystal and its optical properties. Journal of Luminescence, 129(11):1366-1370, 2009.
[ http ]
[73] P. Sharma, K. Biswas, A.K. Mondal, and K. Chattopadhyay. Size effect on the lattice parameter of kcl during mechanical milling. Scripta Materialia, 61(6):600-603, 2009.
[ http ]
[74] J.M. Park, N. Mattern, U. Kühn, J. Eckert, K.B. Kim, W.T. Kim, K. Chattopadhyay, and D.H. Kim. High-strength bulk al-based bimodal ultrafine eutectic composite with enhanced plasticity. Journal of Materials Research, 24(8):2605-2609, 2009.
[ http ]
[75] B. Reddy, P. Bhattacharya, B. Singh, and K. Chattopadhyay. The effect of ball milling on the melting behavior of sn-cu-ag eutectic alloy. Journal of Materials Science, 44(9):2257-2263, 2009.
[ http ]
[76] K. Chattopadhyay and V. Bhattacharya. Microstructure, shape, stability and melting in embedded nanoparticles. Journal of the Indian Institute of Science, 89(1):49-63, 2009.
[ http ]
[77] S. Suwas, S. Biswas, S. Singh D., and K. Chattopadhyay. Texture and grain boundary character distribution during equal channel angular extrusion of some two-phase copper alloys. Materials Science Forum, 584-586 PART 1:585-590, 2008.
[ http ]
[78] S. Bose, V. Bhattacharya, K. Chattopadhyay, and P. Ayyub. Proximity effect controlled superconducting behavior of novel biphasic pb-sn nanoparticles embedded in an al matrix. Acta Materialia, 56(16):4522-4528, 2008.
[ http ]
[79] S. Chatterjee, T.A. Abinandanan, and K. Chattopadhyay. Phase formation in ti/ni dissimilar welds. Materials Science and Engineering A, 490(1-2):7-15, 2008.
[ http ]
[80] P.K. Ray, K. Chattopadhyay, and B.S. Murty. Influence of thermodynamics and local geometry on glass formation in zr based alloys. Applied Physics Letters, 93(6), 2008.
[ http ]
[81] S. Chatterjee, T.A. Abinandanan, and K. Chattopadhyay. Phase-field simulation of fusion interface events during solidification of dissimilar welds: Effect of composition inhomogeneity. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 39(7):1638-1646, 2008.
[ http ]
[82] D. Prabhu, A. Narayanasamy, and K. Chattopadhyay. Effect of aluminum on the hyperfine field and crystallization behaviour of nanoperm alloy. Hyperfine Interactions, 183(1-3):7-15, 2008.
[ http ]
[83] K. Biswas and K. Chattopadhyay. Formation of ω-al7cu2fe phase during laser processing of quasicrystal-forming al-cu-fe alloy. Philosophical Magazine Letters, 88(3):219-230, 2008.
[ http ]
[84] R. Bhowmick, B. Majumdar, D.K. Misra, U. Ramamurty, and K. Chattopadhyay. Synthesis of bulk metallic glass composites using high oxygen containing zr sponge. Journal of Materials Science, 42(22):9359-9365, 2007.
[ http ]
[85] K. Biswas, G. Phanikumar, D. Holland-Moritz, D.M. Herlach, and K. Chattopadhyay. Disorder trapping and grain refinement during solidification of undercooled fe-18 at% ge melts. Philosophical Magazine, 87(25):3817-3837, 2007.
[ http ]
[86] D. Prabhu, A. Narayanasamy, K. Ganesan, N. Ponpandian, and K. Chattopadhyay. Exchange field penetration in Fe73.5Cu1Mo3Si12.5Al1B9 alloy. Journal of Alloys and Compounds, 438(1-2):15-20, 2007.
[ http ]
[87] K. Biswas and K. Chattopadhyay. Microstructural evolution during laser resolidification of fe-25 atom percent ge alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 38 A(7):1395-1406, 2007.
[ http ]
[88] V. Bhattacharya and K. Chattopadhyay. Phase transformation in nanoscale indium-tin alloy particles embedded in metallic matrices. Journal of Nanoscience and Nanotechnology, 7(6):1736-1743, 2007.
[ http ]
[89] D. Prabhu, A. Narayanasamy, and K. Chattopadhyay. Effect of al substitution on the magnetic properties of amorphous Fe73.5Cu1Mo3Si13.5-xAlxB9 alloy. Journal of Non-Crystalline Solids, 353(16-17):1577-1581, 2007.
[ http ]
[90] K. Biswas, A. Mukhopadhyay, B. Basu, and K. Chattopadhyay. Densification and microstructure development in spark plasma sintered wc-6wt% ZrO2 nanocomposites. Journal of Materials Research, 22(6):1491-1501, 2007.
[ http ]
[91] A. Devarajan, M.A. Khadar, and K. Chattopadhyay. Effect of ball milling on chemically synthesized nanoparticles of CaCO3. Materials Science and Engineering A, 452-453:395-400, 2007.
[ http ]
[92] D. Prabhu, K. Ganesan, A. Narayanasamy, K. Chattopadhyay, and N. Ponpandian. Magnetic properties of amorphous Fe73.5Cu1Mo3Si12.5Al1B9 alloy. Materials Science and Engineering A, 448-451:452-455, 2007.
[ http ]
[93] K. Biswas, G. Phanikumar, D.M. Herlach, and K. Chattopadhyay. Non-equilibrium solidification of concentrated fe-ge alloys. Materials Science and Engineering A, 448-451:12-17, 2007.
[ http ]
[94] V. Bhattacharya and K. Chattopadhyay. Melting of multiphase nano-scaled particles embedded in al matrix: Case of pb-sn and bi-sn alloys. Materials Science and Engineering A, 448-451:1003-1008, 2007.
[ http ]
[95] J. De, A.M. Umarji, and K. Chattopadhyay. Origin of contamination and role of mechanochemistry during mechanical alloying: the case of ag-te alloys. Materials Science and Engineering A, 448-451:1062-1066, 2007.
[ http ]
[96] R. Bhowmick, S. Bysakh, Y. Kawamura, M. Yamasaki, U. Ramamurty, and K. Chattopadhyay. Microstructure and mechanical properties of electron beam weld joints of a Zr41Ti14Cu12Ni10Be23 bulk metallic glass with zr. Journal of Materials Research, 22(2):437-444, 2007.
[ http ]
[97] K. Biswas, P.K. Das, and K. Chattopadhyay. Microstructural evolution and metastable phase formation in laser ablation-deposited films of fe-rich fe-ge intermetallic compounds. Philosophical Magazine, 87(2):307-323, 2007.
[ http ]
[98] K. Chattopadhyay. Training young minds for nanoscience and technology: Issues and challenges. In Materials Research Society Symposium Proceedings, volume 931, pages 158-167, 2006.
[ http ]
[99] J.Y. Lee, K.H. Han, J.M. Park, K. Chattopadhyay, W.T. Kim, and D.H. Kim. Deformation and evolution of shear bands under compressive loading in bulk metallic glasses. Acta Materialia, 54(19):5271-5279, 2006.
[ http ]
[100] H.J. Chang, D.H. Kim, Y.M. Kim, Y.J. Kim, and K. Chattopadhyay. On the origin of nanocrystals in the shear band in a quasicrystal forming bulk metallic glass Ti40Zr29Cu9Ni8Be14. Scripta Materialia, 55(6):509-512, 2006.
[ http ]
[101] R. Bhowmick, R. Raghavan, K. Chattopadhyay, and U. Ramamurty. Plastic flow softening in a bulk metallic glass. Acta Materialia, 54(16):4221-4228, 2006.
[ http ]
[102] S.H. Kim, K. Chattopadhyay, B.J. Inkson, G. Möbus, W.T. Kim, and D.H. Kim. Spontaneous formation of the B2 phase from a decagonal quasicrystal under reduced constraint. Journal of Materials Science, 41(18):6081-6086, 2006.
[ http ]
[103] S.H. Kim, K. Chattopadhyay, K.B. Kim, W.T. Kim, and D.H. Kim. Orthorhombic approximant phases and their relation to quasicrystals in mechanically alloyed al-cu-fe-si alloys. Philosophical Magazine Letters, 86(7):425-433, 2006.
[ http ]
[104] B.J. Park, H.J. Chang, D.H. Kim, W.T. Kim, K. Chattopadhyay, T.A. Abinandanan, and S. Bhattacharyya. Phase separating bulk metallic glass: A hierarchical composite. Physical Review Letters, 96(24), 2006.
[ http ]
[105] K. Biswas, B. Basu, A.K. Suri, and K. Chattopadhyay. A tem study on TiB2-20%MoSi2 composite: Microstructure development and densification mechanism. Scripta Materialia, 54(7):1363-1368, 2006.
[ http ]
[106] S. Bakshi, K. Chattopadhyay, and S. Kumar. Novel technique of processing functionally graded material in age-hardenable al-alloys. Transactions of the Indian Institute of Metals, 59(1):73-84, 2006.
[ http ]
[107] S. Chatterjee, T.A. Abinandanan, and K. Chattopadhyay. Microstructure development during dissimilar welding: Case of laser welding of ti with ni involving intermetallic phase formation. Journal of Materials Science, 41(3):643-652, 2006.
[ http ]
[108] N. Ponpandian, A. Narayanasamy, D. Prabhu, K. Ganesan, M.M. Raja, and K. Chattopadhyay. Critical phenomena in finemet alloy. Journal of Magnetism and Magnetic Materials, 296(2):67-76, 2006.
[ http ]
[109] K. Biswas, P.K. Das, and K. Chattopadhyay. Microstructural evolution in laser-ablation-deposited fe-25 at% ge thin film. Journal of Materials Research, 21(1):174-184, 2006.
[ http ]
[110] K. Chattopadhyay. Behaviour of embedded metals and alloys at small sizes. Transactions of the Indian Institute of Metals, 58(6):1057-1067, 2005.
[ http ]
[111] V. Bhattacharya, K. Chattopadhyay, and P. Ayyub. Synthesis, transformation and superconductivity of dual phase in-sn alloy nanoparticles embedded in an al matrix. Philosophical Magazine Letters, 85(11):577-585, 2005.
[ http ]
[112] V. Bhattacharya, E. Yamasue, K.N. Ishihara, and K. Chattopadhyay. On the origin and stability of the metastable phase in rapidly solidified sn-bi alloy particles embedded in al matrix. Acta Materialia, 53(17):4593-4603, 2005.
[ http ]
[113] P. Bhattacharya and K. Chattopadhyay. Phase formation and transformation of embedded alloy nanoparticles: Case of lead indium alloy particles in aluminum. International Journal of Nanoscience, 4(5-6):909-920, 2005.
[ http ]
[114] S. Bakshi, K. Chattopadhyay, and S. Kumar. Studies on the mechanical behaviour of a newly developed al-4.6cu functionally graded material. Materials Forum, 29:467-470, 2005.
[ http ]
[115] G. Phanikumar, S. Manjini, P. Dutta, J. Mazumder, and K. Chattopadhyay. Characterization of a continuous CO2 laser-welded fe-cu dissimilar couple. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36(8):2137-2147, 2005.
[ http ]
[116] G. Phanikumar, K. Biswas, O. Funke, D. Holland-Moritz, D.M. Herlach, and K. Chattopadhyay. Solidification of undercooled peritectic fe-ge alloy. Acta Materialia, 53(13):3591-3600, 2005.
[ http ]
[117] A. Ray, V. Bhattacharya, and K. Chattopadhyay. Evolution of morphology of undercooled droplets in cu-cu 3 near eutectic alloy. Transactions of the Indian Institute of Metals, 58(4):761-767, 2005.
[ http ]
[118] K. Biswas, R. Galun, B.L. Mordike, and K. Chattopadhyay. Laser cladding of quasi-crystal-forming al-cu-fe-bi on an al-si alloy substrate. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36(7):1947-1964, 2005.
[ http ]
[119] A. Pramanick, S. Chatterjee, V. Bhattacharya, and K. Chattopadhyay. Synthesis and microstructure of laser surface alloyed al-sn-si layer on commercial aluminum substrate. Journal of Materials Research, 20(6):1580-1589, 2005.
[ http ]
[120] N. Ponpandian, A. Narayanasamy, C.N. Chinnasamy, N. Sivakumar, J.-M. Greneche, K. Chattopadhyay, K. Shinoda, B. Jeyadevan, and K. Tohji. Néel temperature enhancement in nanostructured nickel zinc ferrite. Applied Physics Letters, 86(19):1-3, 2005.
[ http ]
[121] G. Phanikumar, P. Dutta, and K. Chattopadhyay. Continuous welding of cu-ni dissimilar couple using CO2 laser. Science and Technology of Welding and Joining, 10(2):158-166, 2005.
[ http ]
[122] U. Ramamurty, S. Jana, Y. Kawamura, and K. Chattopadhyay. Hardness and plastic deformation in a bulk metallic glass. Acta Materialia, 53(3):705-717, 2005.
[ http ]
[123] D. Srinivasan and K. Chattopadhyay. Non-equilibrium transformations involving L12-Al3Zr in ternary al-x-zr alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 A(2):311-320, 2005.
[ http ]
[124] R. Goswami and K. Chattopadhyay. Melting of bi nanoparticles embedded in a zn matrix. Acta Materialia, 52(19):5503-5510, 2004.
[ http ]
[125] S. Jana, R. Bhowmick, Y. Kawamura, K. Chattopadhyay, and U. Ramamurty. Deformation morphology underneath the vickers indent in a zr-based bulk metallic glass. Intermetallics, 12(10-11 SPEC. ISS.):1097-1102, 2004.
[ http ]
[126] V. Varghese, K. Chattopadhyay, and A. Narayanasamy. Factors influencing the kinetics of electrochemical reactions in milling. Journal of Materials Science, 39(16-17):5161-5167, 2004.
[ http ]
[127] K. Biswas, G. Phanikumar, K. Chattopadhyay, T. Volkmann, O. Funke, D. Holland-Moritz, and D.M. Herlach. Rapid solidification behaviour of undercooled levited fe-ge alloy droplets. Materials Science and Engineering A, 375-377(1-2 SPEC. ISS.):464-467, 2004.
[ http ]
[128] S. Jana, U. Ramamurty, K. Chattopadhyay, and Y. Kawamura. Subsurface deformation during vickers indentation of bulk metallic glasses. Materials Science and Engineering A, 375-377(1-2 SPEC. ISS.):1191-1195, 2004.
[ http ]
[129] P. Bhattacharya, K. Chattopadhyay, P. Bellon, and K.N. Ishihara. Phase evolution and microtwins in the ni-al multilayers upon annealing and laser mixing. Materials Science and Engineering A, 375-377(1-2 SPEC. ISS.):1277-1284, 2004.
[ http ]
[130] D. Srinivasan and K. Chattopadhyay. Hardness of high strength nanocomposite al-x-zr (x = si,cu,ni) alloys. Materials Science and Engineering A, 375-377(1-2 SPEC. ISS.):1228-1234, 2004.
[ http ]
[131] S. Bysakh, K. Chattopadhyay, T. Maiwald, R. Galun, and B.L. Mordike. Microstructure evolution in laser alloyed layer of cu-fe-al-si on cu substrate. Materials Science and Engineering A, 375-377(1-2 SPEC. ISS.):661-665, 2004.
[ http ]
[132] K. Chattopadhyay and V. Varghese. Understanding mechanical energy driven nonequilibrium processing: Some results. Materials Science and Engineering A, 375-377(1-2 SPEC. ISS.):72-77, 2004.
[ http ]
[133] V. Bhattacharya and K. Chattopadhyay. Morphology and phase transformation of nanoscaled indium-tin alloys in aluminium. Materials Science and Engineering A, 375-377(1-2 SPEC. ISS.):932-935, 2004.
[ http ]
[134] V. Bhattacharya and K. Chattopadhyay. Microstructure and wear behaviour of aluminium alloys containing embedded nanoscaled lead dispersoids. Acta Materialia, 52(8):2293-2304, 2004.
[ http ]
[135] R.J. Joseyphus, A. Narayanasamy, N. Sivakumar, M. Guyot, R. Krishnan, N. Ponpandian, and K. Chattopadhyay. Mechanochemical decomposition of Gd3Fe5O12 garnet phase. Journal of Magnetism and Magnetic Materials, 272-276(III):2257-2259, 2004.
[ http ]
[136] G. Phanikumar, P. Dutta, R. Galun, and K. Chattopadhyay. Microstructural evolution during remelting of laser surface alloyed hyper-monotectic al-bi alloy. Materials Science and Engineering A, 371(1-2):91-102, 2004.
[ http ]
[137] S. Bysakh, K. Mitsuishi, M. Song, K. Furuya, and K. Chattopadhyay. Transmission electron microscopy and high-resolution transmission electron microscopy study of nanostructure and metastable phase evolution in pulsed-laser-ablation-deposited ti-si thin film. Journal of Materials Research, 19(4):1118-1125, 2004.
[ http ]
[138] G. Phanikumar, P. Dutta, and K. Chattopadhyay. Computational modeling of laser welding of cu-ni dissimilar couple. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 35(2):339-350, 2004.
[ http ]
[139] K. Biswas, R. Galun, B.L. Mordike, and K. Chattopadhyay. Laser cladding of quasicrystal forming al-cu-fe on aluminum. Journal of Non-Crystalline Solids, 334-335:517-523, 2004.
[ http ]
[140] S. Ranganathan, K.F. Kelton, and K. Chattopadhyay. Journal of non-crystalline solids: Preface. Journal of Non-Crystalline Solids, 334-335, 2004.
[ http ]
[141] S. Bysakh, K. Chattopadhyay, H. Ling, J.D. Wu, C. Dong, Y.Q. Wang, X.F. Duan, and K.H. Kuo. A study of nanostructures of thin films in b-c-n system produced by pulsed laser deposition and nitrogen ion-beam-assisted pulsed laser deposition. Journal of Materials Research, 19(3):759-767, 2004.
[ http ]
[142] K. Chattopadhyay and Bhattacharya V. Encyclopedia of Nanoscience and Nanotechnology, volume 3, chapter Nanoembedded Metals and Alloy Particles, pages 217-232. American Scientific Publishers, 2004.
[143] K. Chattopadhyay. Phases and microstructure evolution through nonequilibrium processing. Transactions of the Indian Institute of Metals, 57(1):1-11, 2004.
[ http ]
[144] K. Biswas, K. Chattopadhyay, R. Galun, and B.L. Mordike. The cd phase formation during laser cladding and remelting of quasicrystal forming alcufe on pure aluminum. In Materials Research Society Symposium - Proceedings, volume 805, pages 233-239, 2003.
[ http ]
[145] S. Bysakh, S.K. Mitra, G. Phanikumar, J. Mazumder, P. Dutta, and K. Chattopadhyay. Characterization of microstructure in laser-surface-alloyed layers of aluminum on nickel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 34 A(11):2621-2631, 2003.
[ http ]
[146] K. Chattopadhyay, N. Ravishankar, T.A. Abinandanan, and V. Varghese. Understanding milling induced changes: Some results. Proceedings of the Indian Academy of Sciences: Chemical Sciences, 115(5-6 SPEC. ISS.):727-740, 2003.
[ http ]
[147] N. Ponpandian, A. Narayanasamy, K. Chattopadhyay, M.M. Raja, K. Ganesan, C.N. Chinnasamy, and B. Jeyadevan. Erratum: Publisher's note - low-temperature magnetic properties and the crystallization behavior of finemet alloy [journal of applied physics (2003) 93 (6182)]. Journal of Applied Physics, 94(4):2771, 2003.
[ http ]
[148] N. Ponpandian, A. Narayanasamy, K. Chattopadhyay, M. Manivel Raja, K. Ganesan, C.N. Chinnasamy, and B. Jeyadevan. Low-temperature magnetic properties and the crystallization behavior of finemet alloy. Journal of Applied Physics, 93(10 1):6182-6187, 2003.
[ http ]
[149] S. Bysakh, P.K. Das, and K. Chattopadhyay. Evolution of metastable phases during crystallization of pulsed laser deposited amorphous al-fe films. Journal of Materials Research, 18(2):284-295, 2003.
[ http ]
[150] S. Sarkar, P.M. Raj, S. Chakraborty, G. Phanikumar, K. Chattopadhyay, and P. Dutta. Transport phenomena in laser surface alloying. Journal of Materials Science, 38(1):155-164, 2003.
[ http ]
[151] P. Bhattacharya, V. Bhattacharya, and K. Chattopadhyay. Morphology and thermal characteristics of nano-sized pb-sn inclusions in al. Journal of Materials Research, 17(11):2875-2883, 2002.
[ http ]
[152] K.S. Kumar, G. Phanikumar, P. Dutta, and K. Chattopadhyay. Microstructural development of dissimilar weldments: Case of mig welding of cu with fe filler. Journal of Materials Science, 37(11):2345-2349, 2002.
[ http ]
[153] P. Mohan Raj, S. Sarkar, S. Chakraborty, G. Phanikumar, P. Dutta, and K. Chattopadhyay. Modelling of transport phenomena in laser surface alloying with distributed species mass source. International Journal of Heat and Fluid Flow, 23(3):298-307, 2002.
[ http ]
[154] S.H. Kim, G.S. Song, E. Fleury, K. Chattopadhyay, W.T. Kim, and D.H. Kim. Icosahedral quasicrystalline and hexagonal approximant phases in the al-mn-be alloy system. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 82(8):1495-1508, 2002.
[ http ]
[155] S. Bysakh, P. Kumar Das, and K. Chattopadhyay. Microstructure evolution and metastable phase formation in laser-ablation-deposited films of Ti5Si3 intermetallic compound. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 82(6):1235-1248, 2002.
[ http ]
[156] V. Bhattacharya, P. Bhattacharya, and K. Chattopadhyay. Study of embedded lead-tin nanoparticles in aluminum matrix. Materials Science Forum, 386-388:427-432, 2002.
[ http ]
[157] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, R. Justin Joseyphus, B. Jeyadevan, K. Tohji, and K. Chattopadhyay. Grain size effect on the néel temperature and magnetic properties of nanocrystalline nife2o4 spinel. Journal of Magnetism and Magnetic Materials, 238(2-3):281-287, 2002.
[ http ]
[158] K. Chattopadhyay, V. Bhattacharya, and A.P. Tsai. Superconductivity of embedded lead nano particles in metallic and amorphous matrices. In Materials Research Society Symposium - Proceedings, volume 703, pages 535-540, 2002.
[ http ]
[159] K. Chattopadhyay, S. Sanyal, G. Phanikumar, B.L. Mordike, and R. Galun. Microstructure study of laser surface cladding of bearing materials. In bR. Werkstoffwoche-Partnerschaft, editor, Materials Week 2001 - Proceedings, page paper no. 388. Werkstoff-Informationsgesellschaft mbH Frankfurt, 2002.
[160] K. Chattopadhyay, K. Biswas, S. Bysakh, G. Phanikumar, A. Weisheit, R. Galun, and B. Mordike. Quasicrystalline coatings through laser processing: A study on process optimisation and microstructure evolution. In Materials Research Society Symposium - Proceedings, volume 643, pages K1531-K15312, 2001.
[ http ]
[161] S. Bysakh, P.K. Das, and K. Chattopadhyay. Metastable microstructures in laser-ablation-deposited al-fe thin films. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 81(11):2689-2704, 2001.
[ http ]
[162] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, K. Chattopadhyay, K. Shinoda, B. Jeyadevan, K. Tohji, K. Nakatsuka, T. Furubayashi, and I. Nakatani. Mixed spinel structure in nanocrystalline NiFe2O4. Physical Review B - Condensed Matter and Materials Physics, 63(18):1841081-1841086, 2001.
[ http ]
[163] T. Bhatia, K. Chattopadhyay, and V. Jayaram. Effect of rapid solidification on microstructural evolution in MgO-MgAl2O4. Journal of the American Ceramic Society, 84(8):1873-1880, 2001.
[ http ]
[164] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, R.J. Joseyphus, K. Chattopadhyay, K. Shinoda, B. Jeyadevan, K. Tohji, K. Nakatsuka, and J.-M. Greneche. Ferrimagnetic ordering in nanostructured athrmCdFe2O4 spinel. Journal of Applied Physics, 90(1):527-529, 2001.
[ http ]
[165] V. Varghese, A. Sharma, and K. Chattopadhyay. Reaction ball milling of systems involving ionic bonds. Materials Science and Engineering A, 304-306(1-2):434-437, 2001.
[ http ]
[166] D. Srinivasan and K. Chattopadhyay. Metastable phase evolution and hardness of nanocrystalline al-si-zr alloys. Materials Science and Engineering A, 304-306(1-2):534-539, 2001.
[ http ]
[167] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, and K. Chattopadhyay. The influence of Fe3+ ions at tetrahedral sites on the magnetic properties of nonocrystalline ZnFe2O4. Materials Science and Engineering A, 304-306(1-2):983-987, 2001.
[ http ]
[168] M. Manivel Raja, N. Ponpandian, B. Majumdar, A. Narayanasamy, and K. Chattopadhyay. Soft magnetic properties of nanostructured finemet alloy powder cores. Materials Science and Engineering: A, 304–306(0):1062 - 1065, 2001. <ce:title>RQ10, Tenth International Conference on Rapidly Quenched and Metastable Materials</ce:title>.
[ http ]
[169] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, K. Chattopadhyay, and M. Saravanakumar. Order-disorder studies and magnetic properties of mechanically alloyed nanocrystalline Ni3Fe alloy. Materials Science and Engineering A, 304-306(1-2):408-412, 2001.
[ http ]
[170] N. Ravishankar, T.A. Abinandanan, and K. Chattopadhyay. Application of effective potential formalism to mechanical alloying in agcu and cufe systems. Materials Science and Engineering: A, 304–306(0):413 - 417, 2001. <ce:title>RQ10, Tenth International Conference on Rapidly Quenched and Metastable Materials</ce:title>.
[ http ]
[171] P. Bhattacharya, K.N. Ishihara, and K. Chattopadhyay. Feal multilayers by sputtering: Heat treatment and the phase evolution. Materials Science and Engineering A, 304-306(1-2):250-254, 2001.
[ http ]
[172] S. Bysakh, P.K. Das, and K. Chattopadhyay. Metastable microstructures in laser ablation deposited aluminium-50at% nickel thin films. Materials Science and Engineering A, 304-306(1-2):608-611, 2001.
[ http ]
[173] V. Bhattacharya and K. Chattopadhyay. Frictional characteristics of nano-embedded aluminium alloys. Materials Science Forum, 360-362:295-300, 2001.
[ http ]
[174] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, R.Justin Joseyphus, K. Chattopadhyay, K. Shinoda, B. Jeyadevan, K. Tohji, K. Nakatsuka, H. Guérault, and J.-M. Greneche. Structure and magnetic properties of nanocrystalline ferrimagnetic cdfe2o4 spinel. Scripta Materialia, 44(8-9):1411-1415, 2001.
[ http ]
[175] V. Bhattacharya and K. Chattopadhyay. Microstructure and tribological behaviour of nano-embedded al-alloys. Scripta Materialia, 44(8-9):1677-1682, 2001.
[ http ]
[176] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, K. Chattopadhyay, H. Guérault, and J.-M. Greneche. Ferrimagnetic ordering in nanostructured zinc ferrite. Scripta Materialia, 44(8-9):1407-1410, 2001.
[ http ]
[177] P. Bhattacharya, S. Bysakh, K.N. Ishihara, and K. Chattopadhyay. New observation on heating ni-al multilayers of 10nm periodicity. Scripta Materialia, 44(8-9):1831-1835, 2001.
[ http ]
[178] S. Bysakh, P.K. Das, and K. Chattopadhyay. Evolution of metastable microstructures in laser ablation deposited Ni75Al25 thin films. Scripta Materialia, 44(8-9):1847-1851, 2001.
[ http ]
[179] G. Phanikumar and K. Chattopadhyay. Solidification microstructure development. Sadhana - Academy Proceedings in Engineering Sciences, 26(1-2):25-34, 2001.
[ http ]
[180] G. Phanikumar, K. Chattopadhyay, and P. Dutta. Modelling of transport phenomena in laser welding of dissimilar metals. International Journal of Numerical Methods for Heat and Fluid Flow, 11(2):156-171, 2001.
[ http ]
[181] G. Phanikumar, K. Chattopadhyay, and P. Dutta. Mathematical Modeling of weld phenomena, volume 5, chapter Numerical simulation of laser welding of dissimilar metals, pages 885-896. American Scientific Publishers, 2000.
[182] G. Phanikumar, B. Basu, S. Chakraborty, K. Chattopadhyay, P. Dutta, and J. Majumdar. Laser surface alloying of aluminum on iron substrate: experiments and numerical simulation. In Proceedings of EUROMAT'99, volume 11 of Surface Engineering, pages 425-430. Wiley-VCH, 2000.
[183] C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, K. Chattopadhyay, H. Guérault, and J.-M. Greneche. Magnetic properties of nanostructured ferrimagnetic zinc ferrite. Journal of Physics Condensed Matter, 12(35):7795-7805, 2000.
[ http ]
[184] K. Chattopadhyay. Trends and opportunities in basic research in microgravity materials processing. Current Science, 79(3):328-334, 2000.
[ http ]
[185] B. Majumdar and K. Chattopadhyay. Aligned monotectic growth in unidirectionally solidified zn-bi alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 31(7):1833-1842, 2000.
[ http ]
[186] G. Phanikumar, K. Chattopadhyay, and P. Dutta. Supercomputing applications in materials engineering. Current Science, 78(7):847-849, 2000.
[ http ]
[187] M.M. Raja, K. Chattopadhyay, B. Majumdar, and A. Narayanasamy. Structure and soft magnetic properties of finemet alloys. Journal of Alloys and Compounds, 297(1-2):199-205, 2000.
[ http ]
[188] A.P. Tsai, N. Chandrasekhar, and K. Chattopadhyay. Size effect on the superconducting transition of embedded lead particles in an al-cu-v amorphous matrix. Applied Physics Letters, 75(11):1527-1528, 1999.
[ http ]
[189] C.N. Chinnasamy, A. Narayanasamy, K. Chattopadhyay, and N. Ponpandian. Magnetic properties of mechanically alloyed nanocrystalline Ni3Fe. Nanostructured Materials, 12(5-8):951 - 954, 1999. <ce:title>The Fourth International Conference on Nanostructured Materials (NANO '98)</ce:title>.
[ http ]
[190] N. Ravishankar, J. Park, K. Aoki, T. Masumoto, and K. Chattopadhyay. Microstructural evolution and giant magnetoresistance in melt spun and annealed Cu85(FeCo)15 alloy. Journal of Applied Physics, 86(5):2733-2738, 1999.
[ http ]
[191] T. Bhatia, K. Chattopadhyay, and V. Jayaram. Segregation in the MgO-MgAl2O4 system processed from nitrate precursors. Journal of Materials Research, 14(8):3319-3327, 1999.
[ http ]
[192] R. Goswami, P. Ryder, and K. Chattopadhyay. Melting and solidification of nanoscale bi particles embedded in a glassy and crystalline matrix. Philosophical Magazine Letters, 79(7):481-489, 1999.
[ http ]
[193] P. Bhattacharya and K. Chattopadhyay. Nano Al2O3-Pb and SiO2-Pb cermets by sol-gel technique and the phase transformation study of the embedded pb particles. Nanostructured Materials, 12(5):1077-1080, 1999.
[ http ]
[194] K.K. Prashanth, K. Chattopadhyay, and J. Majumder. Investigation on the laser surface alloying of copper on iron. Journal of Materials Science, 34(14):3437-3445, 1999.
[ http ]
[195] P. Bhattacharya, B. Majumdar, and K. Chattopadhyay. Nanoscale embedded alloy particles through rapid solidification: The case of al-pb-in and cu-fe-si. Journal of Electron Microscopy, 48(supplimentary):1047, 1999.
[196] B. Radojević, K. Chattopadhyay, P. Bhattacharya, and M. Davidović. On the stability and structure of zr-cu and zr-ti-cu alloys. Diffusion and Defect Data Pt.B: Solid State Phenomena, 61-62:109-114, 1998.
[ http ]
[197] G. Phanikumar, R. Pardeshi, K. Chattopadhyay, P. Dutta, and J. Majumder. Dissimilar metal welding of copper nickel couple by continuous wave CO2 laser. ASM Proceedings of the International Conference: Trends in Welding Research, pages 461-466, 1998.
[ http ]
[198] D. Srinivasan and K. Chattopadhyay. Formation and coarsening of a nanodispersed microstructure in melt spun al-ni-zr alloy. Materials Science and Engineering A, 255(1-2):107-116, 1998.
[ http ]
[199] S. Ranganathan, K. Chattopadhyay, A. Singh, and K.F. Kelton. Decagonal quasicrystals. Progress in Materials Science, 41(4):195-240, 1998.
[ http ]
[200] R. Goswami, K. Chattopadhyay, and P.L. Ryder. Melting of pb particles embedded in cu-zn matrices. Acta Materialia, 46(12):4257-4271, 1998.
[ http ]
[201] D. Srinivasan, V. Jayaram, P.K. Das, and K. Chattopadhyay. Nanodispersed microstructures on laser mixing of al-ni multilayers. Scripta Materialia, 38(6):857-861, 1998.
[ http ]
[202] K. Raviprasad, N. Ravishankar, K. Chattopadhyay, and M. Umemoto. Magnetic hardening mechanism in nanocrystalline Nd2Fe14B with 0.1 at% addition of cr, cu, or zr. Journal of Applied Physics, 83(2):916-920, 1998.
[ http ]
[203] K. Sridhar and K. Chattopadhyay. Synthesis by mechanical alloying and thermoelectric properties of Cu2Te. Journal of Alloys and Compounds, 264(1-2):293-298, 1998.
[ http ]
[204] P. Bhattacharya and K. Chattopadhyay. Nucleation behaviour of nanodispersed pb in SiO2 matrix produced by sol-gel route. Materials Transactions, JIM, 39(1):75-79, 1998.
[ http ]
[205] P. Bhattacharya and K. Chattopadhyay. Synthesis and phase transformation of nanodispersed pb in sio2 and Al2O3 matrices. In D.H. Sastry, E.S. Dwarakadasa, G.K. Iyenger, and S. Subramaniam, editors, Proceedings of the International Conference on Recent Advances in Metallurgical Processes, volume 2, page 817. New Age International, New Delhi, India, 1997.
[206] C. Dong, D.H. Wang, Y.M. Wang, F. Ge, F.Z. He, Q.H. Zhang, K. Chattopadhyay, and S. Ranganathan. The structural relations between quasicrystals and B2 based approximants. In S. Takeuchi and T. Fujiwara, editors, Proceedings of the 6th International Conference on Quasicrystals, Tokyo, pages 223-226. World Scientific, 1997.
[207] R. Nagarajan, S. Manjini, K. Chattopadhyay, and K. Aoki. The effect of ternary addition of silicon on the structure and microstructure of rapidly solidified equiatomic tini alloys. Journal of Materials Science, 32(22):6021-6027, 1997.
[ http ]
[208] J. Chitralekha, E.S.R. Gopal, and K. Chattopadhyay. Studies on elemental tellurium under high pressure. Journal of Materials Science, 32(8):2177-2180, 1997.
[ http ]
[209] K. Chattopadhyay, N. Ravishankar, and R. Goswami. Shapes of quasicrystals. Progress in Crystal Growth and Characterization of Materials, 34(1-4):237-249, 1997.
[ http ]
[210] K. Chattopadhyay and R. Goswami. Melting and superheating of metals and alloys. Progress in Materials Science, 42(1-4):287-300, 1997.
[ http ]
[211] D. Srinivasan and K. Chattopadhyay. Nanocomposite microstructure in a melt spun al-cu-zr alloy. Materials Science Forum, 243-245:251-256, 1997.
[ http ]
[212] R. Nagarajan, K. Aoki, and K. Chattopadhyay. Synthesis of nanodispersed phases during rapid solidification and crystallization of glasses in Ti75Ni25 alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 28(11):2223-2232, 1997.
[ http ]
[213] R. Nagarajan, S. Ranganathan, and K. Chattopadhyay. Synthesis of nanostructured titanium alloys. Metals Materials and Processes, 9(3):259-266, 1997.
[ http ]
[214] S. Banerjee, A.K. Raychaudhuri, R. Goswami, and K. Chattopadhyay. The low-temperature resistivity and magnetoresistance of icosahedral quasicrystalline al-cu-cr. Journal of Physics Condensed Matter, 9(31):6643-6650, 1997.
[ http ]
[215] K. Chattopadhyay. Synthesis and properties of nanodispersed granular materials. Materials Science and Engineering A, 226-228:1012-1018, 1997.
[ http ]
[216] T. Bhatia, K. Chattopadhyay, and V. Jayaram. Effect of liquid precursor pyrolysis on phase selection in the MgO-MgAl2O4 system. Materials Science and Engineering A, 226-228:930-937, 1997.
[ http ]
[217] R. Nagarajan, S. Ranganathan, K. Aoki, and K. Chattopadhyay. Metastable microstructures in rapidly solidified ni rich tini alloys. Materials Transactions, JIM, 38(5):406-412, 1997.
[ http ]
[218] B. Majumdar, M.M. Raja, A. Narayanasamy, and K. Chattopadhyay. Structural and magnetic investigations on the metastable phases of the mechanically alloyed fe-cu system. Journal of Alloys and Compounds, 248(1-2):192-200, 1997.
[ http ]
[219] N.K. Mukhopadhyay, K. Chattopadhyay, and S. Ranganathan. Ordering transformation in icosahedral quasicrystals and related crystalline phases. Bulletin of Materials Science, 19(5):717-723, 1996.
[ http ]
[220] R. Nagarajan and K. Chattopadhyay. Synthesis of nanocomposites by nonequilibrium processing. In S. Banerjee and R.V. Ramanujan, editors, Proceedings of the International Conference on Advances in Physical Metallurgy, Bombay, page 111. Gordon and Breach Publishers, Amsterdam, 1996.
[221] B. Majumdar and K. Chattopadhyay. The rayleigh instability and the origin of rows of droplets in the monotectic microstructure of zinc-bismuth alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 27(7):2053-2057, 1996.
[ http ]
[222] J. Chitralekha, A. Srinivasan, K. Chattopadhyay, and E.S.R. Gopal. Influence of the mechanical and chemical thresholds on the microhardness of ternary chalcogenide glasses. Physica Status Solidi (B) Basic Research, 197(2):343-348, 1996.
[ http ]
[223] R. Goswami and K. Chattopadhyay. Depression of melting point of multidomained bismuth in aluminum based metallic glass nanocomposites. Applied Physics Letters, 69(7):910-912, 1996.
[ http ]
[224] R. Goswami and K. Chattopadhyay. The solidification behaviour of bi particles embedded in an al matrix. Acta Materialia, 44(6):2421-2429, 1996.
[ http ]
[225] S. Ranganathan, B.S. Murty, R. Nagarajan, and K. Chattopadhyay. Nanostructured titanium-nickel alloys: a comparison of processing routes. Processing and Properties of Nanocrystalline Materials, pages 37-48, 1996.
[ http ]
[226] K. Chattopadhyay, X.-M. Wang, K. Aoki, and T. Masumoto. Metastable phase formation during mechanical alloying of al-ge and al-si alloys. Journal of Alloys and Compounds, 232(1-2):224-231, 1996.
[ http ]
[227] R. Goswami and K. Chattopadhyay. Heterogeneous nucleation of nanometre-sized bi particles embedded in a zn matrix. Philosophical Magazine Letters, 72(6):411-416, 1995.
[ http ]
[228] S. Banerjee, R. Goswami, K. Chattopadhyay, and A.K. Raychaudhuri. Structural and electrical transport properties of al-cu-cr quasicrystals. Physical Review B, 52(5):3220-3233, 1995.
[ http ]
[229] J. Chitralekha, K. Raviprasad, E.S.R. Gopal, and K. Chattopadhyay. Formation of metastable π phase in mechanically alloyed tellurium-rich ag-te alloys. Journal of Materials Research, 10(8):1897-1904, 1995.
[ http ]
[230] R. Goswami and K. Chattopadhyay. The superheating and the crystallography of embedded pb particles in f.c.c. al, cu and ni matrices. Acta Metallurgica Et Materialia, 43(7):2837-2847, 1995.
[ http ]
[231] C.S. Pande, B.B. Rath, S. Ranganathan, and K. Chattopadhyay. Preface. Materials Science and Engineering B, 32(3), 1995.
[ http ]
[232] K. Raviprasad and K. Chattopadhyay. The nature of the fringe contrast from the shear apbs in ordered fe-12.2at%si alloy. Scripta Metallurgica et Materiala, 32(7):1049-1054, 1995.
[ http ]
[233] V.T. Swamy, S. Ranganathan, and K. Chattopadhyay. Resolidification behaviour of laser surface-melted metals and alloys. Surface and Coatings Technology, 71(2):129-134, 1995.
[ http ]
[234] B. Majumdar, R. Goswami, and K. Chattopadhyay. Monotectic microstructure in a zn-0.6at%bi alloy at near equilibrium and nonequilibrium situation. Solid State Phenomena, 42-43:11-18, 1995.
[235] K. Chattopadhyay, R. Goswami, R. Nagaraj, T. Bhatia, and B. Majumdar. Synthesis and properties of nanodispersed alloys. In K. Otsuka, editor, Proceedings of the International Conference on Advanced Materials 1993, Tokyo, page 1547. Elsevier, Amsterdam, 1994.
[236] N. Ravishankar, H.I. Aaronson, and K. Chattopadhyay. Mechanism of the early stages of α1 plate formation in a cu-39 pct zn alloy. Metallurgical and Materials Transactions A, 25:2631-2637, 1994.
[ http ]
[237] R. Nagarajan, K. Aoki, and K. Chattopadhyay. Microstructural development in rapidly solidified tini alloys. Materials Science and Engineering A, 179-180(PART 1):198-204, 1994.
[ http ]
[238] R. Goswami and K. Chattopadhyay. Microstructural developments in rapidly soliified monotectic alloys. Materials Science and Engineering A, 179-180(PART 1):163-167, 1994.
[ http ]
[239] R. Nagarajan and K. Chattopadhyay. Intermetallic Ti2Ni/tini nanocomposite by rapid solidification. Acta Metallurgica Et Materialia, 42(3):947-958, 1994.
[ http ]
[240] R. Goswami and K. Chattopadhyay. Microstructural evolution and transformation pathways in the near monotectic zn rich znbi alloys during rapid solidification. Acta Metallurgica Et Materialia, 42(2):383-393, 1994.
[ http ]
[241] R. Goswami and K. Chattopadhyay. The superheating of pb embedded in a zn matrix - the role of interface melting. Philosophical Magazine Letters, 68(4):215-223, OCT 1993.
[242] K. Chattopadhyay. Growth and morphology of quasicrystals. Phase Transitions, 44(1-3):69-79, 1993.
[ http ]
[243] R. Goswami, S. Banerjee, K. Chattopadhyay, and A.K. Raychaudhuri. Superconductivity in rapidly quenched metallic systems with nanoscale structure. Journal of Applied Physics, 73(6):2934-2940, 1993.
[ http ]
[244] K. Raviprasad, K. Aoki, and K. Chattopadhyay. The nature of dislocations and effect of order in rapidly solidified fe(5.5-7.5)wt%si alloys. Materials Science and Engineering A, 172(1-2):125-135, 1993.
[ http ]
[245] S.B. Singh, R. Goswami, and K. Chattopadhyay. Hardness behaviour of ultrafine dispersed materials with soft dispersoids: The case of rapidly solidified zn-bi immiscible alloy. Scripta Metallurgica et Materiala, 28(12):1507-1512, 1993.
[ http ]
[246] K. Raviprasad and K. Chattopadhyay. The influence of critical points and structure and microstructural evolution in iron rich fesi alloys. Acta Metallurgica Et Materialia, 41(2):609-624, 1993.
[ http ]
[247] K. Chattopadhyay. Nanocomposites by rapid solidifcation route. Bulletin of Materials Science, 15(6):515-525, 1992.
[ http ]
[248] R. Goswami, K. Chattopadhyay, W.T. Kim, and B. Cantor. Heterogeneous nucleation of pb particles embedded in a zn matrix. Metallurgical Transactions A, 23(12):3207-3218, 1992.
[ http ]
[249] S. Sircar, K. Chattopadhyay, and J. Mazumder. Nonequilibrium synthesis of NbAl3 and nb-al-v. Metallurgical Transactions A, 23(9):2419-2429, 1992.
[ http ]
[250] K. Raviprasad and K. Chattopadhyay. Continuous ordering below the tricritical point: A critical test for the kinetic pathway in fe-12at% si alloy. Philosophical Magazine Letters, 65(5):255-259, 1992.
[ http ]
[251] K. Chattopadhyay and M.K. Tiwari. Materials processing under microgravity conditions using drop tubes. Bulletin of Materials Science, 15(2):91-110, 1992.
[ http ]
[252] V.T. Swamy, S. Ranganathan, and K. Chattopadhyay. Microstructural development in microsecond pulsed laser melted polycrystalline nickel. Journal of Materials Science, 27(5):1375-1379, 1992.
[ http ]
[253] K. Chattopadhyay, N.K. Mukhopadhyay, and S. Ranganathan. New Materials, chapter Icosahedral Quasicrystals, page 234. Springer, 1992.
[254] K. Raviprasad, S. Ranganathan, and K. Chattopadhyay. On the influence of tricritical point on the microstructural evolution in fe-ge system. Scripta Metallurgica et Materiala, 26(3):467-472, 1992.
[ http ]
[255] K. Chattopadhyay and S. Ranganathan. Encyclopaedia of Materials Science and Engineering, Supplimentry Volume, volume 2, chapter Quasicrystals, page 1205. Pergamon Press, 1992.
[256] S. Ranganathan and K. Chattopadhyay. Quasicrystals. Annual Review of Materials Science, 21(1):437-462, 1991.
[ http ]
[257] B. Majumdar, R. Goswami, and K. Chattopadhyay. The nature and solidification characteristics of monotectic systems with special reference to aluminum alloys. Metals, Materials and Processes, 2:293, 1991.
[258] N.K. Mukhopadhyay, K.N. Ishihara, S. Ranganathan, and K. Chattopadhyay. Rational approximant structures and phason strain in icosahedral quasicrystalline phases. Acta Metallurgica Et Materialia, 39(6):1151-1159, 1991.
[ http ]
[259] D.H. Kim, K. Chattopadhyay, and B. Cantor. Quasicrystalline and related crystalline phases in a rapidly solidified 2024-2li aluminium alloy. Acta Metallurgica Et Materialia, 39(5):859-875, 1991.
[ http ]
[260] C. Hayzelden, K. Chattopadhyay, J.C. Barry, and B. Cantor. Transmission electron microscopy observations of the f.c.c.-to-h.c.p. martensite transformation in co-ni alloys. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 63(3):461-470, 1991.
[ http ]
[261] S.K. Dhua, S. Raju, and K. Chattopadhyay. The liquid immiscibility and associated monotectic reaction in zn-ln system. Metallurgical Transactions A, 22(1):1131-1136, 1991.
[ http ]
[262] D.L. Zhang, K. Chattopadhyay, and B. Cantor. Heterogeneous nucleation of solidification of cadmium particles embedded in an aluminium matrix. Journal of Materials Science, 26(6):1531-1544, 1991.
[ http ]
[263] S. Ranganathan and K. Chattopadhyay. Advanced aluminium alloys via rapid solidification. Aluminium India, VIII:1, 1991.
[264] K. Chattopadhyay and N.K. Mukhopadhyay. On the origin of banded microstructure in rapidly solidified alloys: The case of al-10%mn quasicrystalline system. Journal of Crystal Growth, 106(2-3):387-392, 1990.
[ http ]
[265] K. Chattopadhyay, K. Sreekumar, A.K. Sarma, and K. Raviprasad. A study of the early stage decomposition behaviour of alli alloys at room temperature. Scripta Metallurgica et Materiala, 24(8):1495-1500, 1990.
[ http ]
[266] D. H. Kim, K. Chattopadhyay, and B. Cantor. An in situ electron microscope investigation of the icosahedral-to-decagonal quasicrystalline transformation in al-20 at% mn. Philosophical Magazine A, 62(2):157-171, 1990.
[ http ]
[267] K. Chattopadhyay, V.T. Swamy, and S.L. Agarwala. The solidification behaviour of undercooled alcu alloys in contact with the primary phases. Acta Metallurgica Et Materialia, 38(3):521-531, 1990.
[ http ]
[268] N.K. Mukhopadhyay, K. Chattopadhyay, and S. Ranganathan. A new indexing system for decagonal quasicrystals. In M.J. Yacaman, D. Romeu, V. Castano, and A. Gomez, editors, Proceedings of the Third International Conference on Quasicrystals and Incommensurate structures, page 212. World Scientific, Singapore, 1990.
[269] K. Chattopadhyay and S. Ranganathan. Quasicrystals. Indian Journal of Technology, page 394, 1990.
[270] V.T. Swamy, K. Chattopadhyay, and S. Ranganathan. The nature of metastable phase formation in the microsecond pulsed laser-melted pool of alge eutectic alloy. Materials Science and Engineering A, 123(2):247-254, 1990.
[ http ]
[271] K. Chattopadhyay and K. Raviprasad. Extension of solid solution in rapidly solidified binary alloys. Mechanical and corrosion properties. Series A, Key engineering materials, 38-39:83-98, 1990.
[ http ]
[272] K. Chattopadhyay. Transformations in rapidly solidified and solid state quenched al-li alloys: The early stages. In Proceedings of the seminar on the Science and Technology of Al-Li alloys, page 73. Aluminum Association of India, 1989.
[273] S. Ranganathan and K. Chattopadhyay. Decagonal quasicrystals. Phase Transitions, 16(1-4):67-83, 1989.
[ http ]
[274] N.K. Mukhopadhyay, S. Ranganathan, and K. Chattopadhyay. Evolution of superlattice order in al-mn quasicrystals and its relation to face-centred icosahedral quasicrystals. Philosophical Magazine Letters, 60(5):207-211, 1989.
[ http ]
[275] K. Chattopadhyay, P.R. Swarnamba, and J.P.N. Srivastava. The evolution of microstructure in the undercooled zn-sn entrained droplets. Metallurgical Transactions A, 20(10):2109-2115, 1989.
[ http ]
[276] V.T. Swamy, S. Ranganathan, and K. Chattopadhyay. On the resolidification behaviour of microsecond pulsed-laser-melted pool of bismuth. Journal of Crystal Growth, 96(3):628-636, 1989.
[ http ]
[277] N.K. Mukhopadhyay, K. Chattopadhyay, and S. Ranganathan. Synthesis and structural aspects of quasicrystals in mg-al-ag system: Mg4Al6Ag. Metallurgical Transactions A, 20(5):805-812, 1989.
[ http ]
[278] V.T. Swamy, S. Ranganathan, and K. Chattopadhyay. Rapidly solidified al-cr alloys: Crystalline and quasicrystalline phases. Journal of Materials Research, 4(3):539-551, 1989.
[ http ]
[279] K. Aoki, A. Yanagitani, T. Masumoto, and K. Chattopadhyay. Formation and crystallization of hydrogen-induced amorphous SmFe2H3.6 alloy. Journal of The Less-Common Metals, 147(1):105-111, 1989.
[ http ]
[280] N.K. Mukhopadhyay, G.N. Subbanna, K. Chattopadhyay, and S. Ranganathan. Electron microscopy of quasicrystals in al-mn-ge system. In Proceedings of the 4th Asia-Pacific Conference on Electron microscopy, Bangkok, Thailand, page 187, 1988.
[281] D. Dutta, C.G.K. Nair, and K. Chattopadhyay. Development and evaluation of silicon carbide particulate reinforced aluminum composites. Key Engineering Materials, 29-31:755-798, 1988.
[282] K. Aoki, X.-G. Li, K. Chattopadhyay, and T. Masumoto. Hydrogen-induced amorphization in intermetallic compound Zr3In. Scripta Metallurgica, 22(7):991-994, 1988.
[ http ]
[283] K. Raviprasad and K. Chattopadhyay. The effect of rapid solidification on the order-disorder transformation in iron-based alloys. Materials Science and Engineering, 98(C):281-284, 1988.
[ http ]
[284] C. Dong, K.H. Kuo, and K. Chattopadhyay. Tem study of the icosahedral quasicrystal in a rapidly solidified FeTi2 alloy. Materials Science Forum, 22-24:555, 1987.
[285] N.K. Mukhopadhyay and K. Chattopadhyay. The nature of the early stages of decomposition of icosahedral quasicrystals. Materials Science Forum, 22-24:639, 1987.
[286] N. K. Mukhopadhyay, N. Thangaraj, K. Chattopadhyay, and S. Ranganathan. A comparative electron microscopic study of al-based and mg-based quasicrystals. Journal of Materials Research, 2:299-304, 5 1987.
[ http ]
[287] K.I. Moore, K. Chattopadhyay, and B. Cantor. In-situ transmission electron microscope measurements of solid al-solid pb and solid al-liquid pb surface-energy anisotropy in rapidly solidified al-5 Proceedings of The Royal Society of London, Series A: Mathematical and Physical Sciences, 414(1847):499-507, 1987.
[ http ]
[288] N.K. Mukhopadhyay, S. Ranganathan, and K. Chattopadhyay. On the short-range order in al-mn quasicrystals during low-temperature ageing. Philosophical Magazine Letters, 56(4):121-127, 1987.
[ http ]
[289] K. Chattopadyhay, K. Aoki, and T. Masumoto. The nature of hydrogen induced amorphization of SmNi2 laves compound. Scripta Metallurgica, 21(3):365 - 369, 1987.
[ http ]
[290] N. Thangaraj, G. N. Subbanna, S. Ranganathan, and K. Chattopadhyay. Electron microscopy and diffraction of icosahedral and decagonal quasicrystals in aluminium-manganese alloys. Journal of Microscopy, 146(3):287-302, 1987.
[ http ]
[291] C. Dong, K. Chattopadhyay, and K.H. Kuo. Quasicrystalline eutectic growth and metastable phase orientation relations in rapidly solidified feti alloys. Scripta Metallurgica, 21(10):1307-1312, 1987.
[ http ]
[292] Kishore, U. Sudarsan, N. Chandran, and K. Chattopadhyay. On the wear mechanism of iron and nickel based transition metal-metalloid metallic glasses. Acta Metallurgica, 35(7):1463-1473, 1987.
[ http ]
[293] S.K. Dhua, S. Raju, and K. Chattopadhyay. Liquid immiscibility and associated monotectic reaction in zn-in system. Metallurgical transactions. A, Physical metallurgy and materials science, 18 A(6):1131-1136, 1987.
[ http ]
[294] M.B. Arbhavi and K. Chattopadhyay. On the impact of rapid solidification on the zone formation kinetics of age hardenable al-cu alloys. Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 78(4):259-261, 1987.
[ http ]
[295] K. Chattopadhyay, S. Lele, N. Thangaraj, and S. Ranganathan. Vacancy ordered phases and one-dimensional quasiperiodicity. Acta Metallurgica, 35(3):727-733, 1987.
[ http ]
[296] N. Thangaraj, K. Chattopadhyay, S. Ranganathan, C. Small, and H.A. Davies. Quasicrystals and ordered twins in rapidly solified al-pd alloys. In XIth International Congress on Electron Microscopy, Kyoto, Japan, page 1525, 1986.
[297] H.I. Aaronson, G. Spanos, E.S.K. Menon, M.G. Hall, W.F. Lange, and K. Chattopadhyay. Structure and energy of interphase boundaries. In K.N. Subramanian and M.A. Imam, editors, Structure and Deformation of Boundaries, pages 3-20. AIME, Warrendale, U.S.A., 1986.
[ http ]
[298] N. Thangaraj, K. Chattopadhyay, E.S.R. Gopal, and S. Ranganathan. On the morphology of icosahedral quasicrystals in al-mn alloys. Key Engineering Materials, 13(pt 1):245-248, 1986.
[ http ]
[299] S. Ranganathan and K. Chattopadhyay. Decagonal quasicrystals. Key Eng Mater, 13(pt 1):229-236, 1986.
[ http ]
[300] G.K. Ramesh Prasad, K. Chattopadhyay, and M. Mohan Rao. Structure-property correlation in dual-phase copper-tin alloys. Journal of Materials Science Letters, 5(10):991-994, 1986.
[ http ]
[301] K. Raviprasad, M. Tenwick, H.A. Davies, and K. Chattopadhyay. The nature of ordered structures in melt spun iron-silicon alloys. Scripta Metallurgica, 20(9):1265-1270, 1986.
[ http ]
[302] K. Chattopadhyay and H.I. Aaronson. Interfacial structure and crystallographic studies of transformations in β' and β cuzn alloys-ii. martensitic formation of α1' plates in β'. Acta Metallurgica, 34(4):713-720, 1986.
[ http ]
[303] K. Chattopadhyay and H.I. Aaronson. Interfacial structure and crystallographic studies of transformations in β' and β cuzn alloys-i. isothermal formation of α1 plates from β'. Acta Metallurgica, 34(4):695-711, 1986.
[ http ]
[304] N.K. Mukhopadhyay, G.N. Subbanna, S. Ranganathan, and K. Chattopadhyay. An electron microscopic study of quasicrystals in a quaternary alloy : Mg32(Al, Zn, Cu)49. Scripta Metallurgica, 20(4):525-528, 1986.
[ http ]
[305] K. Chattopadhyay, V.A. Ravi, and S. Ranganathan. Non-equilibrium trapping in alin system. Acta Metallurgica, 34(4):691-693, 1986.
[ http ]
[306] S. Vasudevan, V.S. Raja, S. Sesham, and K. Chattopadhyay. Study of the influence of manganese additions on electrochemical corrosion behavior of austenitic spheroidal graphite iron. British Corrosion Journal, 21:87, 1986.
[307] K. Chattopadhyay. The role of interfaces in diffusional growth. Materials Science Forum, 3:231, 1985.
[308] K. Chattopadhyay, S. Lele, S. Ranganathan, G.N. Subbanna, and N. Thangaraj. Electron microscopy of quasicrystals and related structures. Current Science, 54:895, 1985.
[309] U. Sudarsan, K. Chattopadhyay, and Kishore. Dry sliding wear of metglas 2605 sc. In S. Steeb and H. Warlimont, editors, Rapidly Quenched Metals, volume 2, pages 1439-1442. North Holland, Amsterdam, 1985.
[ http ]
[310] Y.V.S.S. Prasad, S.L. Agarwal, K. Chattopadhyay, and P. Ramachandrarao. Solidification of undercooled liquid alloys entrapped in solid - a structural investigation. In S. Steeb and H. Warlimont, editors, Rapidly Quenched Metals, volume 1, pages 39-42. North Holland, Amsterdam, 1985.
[ http ]
[311] K. Chattopadhyay, S. Lele, R. Prasad, S. Ranganathan, G.N. Subbanna, and N. Thangaraj. On the variety of electron diffraction patterns from quasicrystals. Scripta Metallurgica, 19(11):1331-1334, 1985.
[ http ]
[312] S.N. Ojha, K. Chattopadhyay, and P. Ramachandra Rao. Phase transformations and metastable phase equilibria in alge alloy. Materials Science and Engineering, 73(C):177-185, 1985.
[ http ]
[313] K. Chattopadhyay. Electron diffraction study on thin foil martensites of cu-zn alloy. Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 76(7):496-499, 1985.
[ http ]
[314] K. Chattopadhyay, S. Ranganathan, G.N. Subbanna, and N. Thangaraj. Electron microscopy of quasi-crystals in rapidly solidified al-14%mn alloys. Scripta Metallurgica, 19(6):767-771, 1985.
[ http ]
[315] S. Vasudevan, S. Sesham, and K. Chattopadhyay. A study on the influence of manganese additions on austenitic ductile iron. British Foundry Journal, 78:243, 1985.
[316] V.A. Ravi, K. Chattopadhyay, S. Ranganathan, C.R. Prasad, and K.A. Nirmala. Laser and its Applications, chapter Laser glazing of aluminum alloys, page 466. Tata McGraw Hill, New Delhi, 1984.
[317] Y.V.S.S. Prasad, P. Ramachandra Rao, and K. Chattopadhyay. The nature of non-equilibrium solidification of undercooled agcu alloys in contact with primary copper dendrites. Acta Metallurgica, 32(10):1825-1828, 1984.
[ http ]
[318] F.K. LeGoues, K. Chattopadhyay, and H.I. Aaronson. On the application of orientation relationship measurements to distinguishing between different nucleation mechanisms. Scripta Metallurgica, 17(5):675-676, 1983.
[ http ]
[319] S.N. Ojha, K. Chattopadhyay, and P. Ramachandrarao. Microstructure and mechanical properties of Al-CuAl2 eutectic alloys solidified over a heat pipe. Journal of Materials Science, 18(4):1174-1182, 1983.
[ http ]
[320] K. Chattopadhyay. Solid-State Phase Transformation, chapter Discussion on solute redistribution during the formation of bainite plates in Cu-Zn and Cu-Al-Zn alloys, page 990. Metallurgical Society of AIME, Warrendale, U.S.A., 1982.
[321] R.K. Singh, K. Chattopadhyay, S. Lele, and T.R. Anantharaman. Impact of substrate temperature on rapid solidification of an al-cu eutectic alloy. Journal of Materials Science, 17(6):1617-1622, 1982.
[ http ]
[322] K. Chattopadhyay. Young Scientist's Lectures, chapter Rapid Solidification of Metals and Alloys, page 28. Indian National Science Academy, New Delhi, India, 1980.
[323] G.V.S. Sastry, K.K. Bariar, K. Chattopadhyay, and P. Ramachandrarao. Vacancy ordered phases in rapidly solidified aluminium-copper alloys. Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 71(11):756-759, 1980.
[ http ]
[324] K. Chattopadhyay, S. Lele, and P. Ramachandrarao. On the occurrence of twinned dendrites in rapidly solidified aluminum alloys. Journal of Crystal Growth, 49(2):322-324, 1980. .
[ http ]
[325] K. Chattopadhyay, A.P. Ramineni, and P. Ramachandrarao. Estimation of cooling rates in rapid solidification from eutectic cell spacing. Journal of Materials Science, 15(3):797-799, 1980. .
[ http ]
[326] K. Chattopadhyay and P. Ramachandrarao. Rapid solidification and decomposition of a hypomonotectic al-cd alloy. Journal of Materials Science, 15(3):685-692, 1980. .
[ http ]
[327] K. Chattopadhyay and P. Ramachandrarao. Metastable phase formation and decomposition in a rapidly solidified aluminium-platinum alloy. Materials Science and Engineering, 38(1):7 - 17, 1979.
[ http ]
[328] P. Ramachandrarao, K. Lal, A. Singhdeo, and K. Chattopadhyay. Quenching from the mushy state - a new technique for the production of metastable phases. Materials Science and Engineering, 41(2):259-264, 1979. .
[ http ]
[329] S.K. Tiwari, K. Chattopadhyay, C. Suryanarayana, and T.R. Anantharaman. Decomposition studies of a liquisol quenched al-33 at% mg alloy. Metallography, 12(1):73-86, 1979.
[ http ]
[330] K. Chattopadhyay, S. Lele, and P. Ramachandrarao. On Al2M-type phases in splat cooled aluminium alloys. Journal of Materials Science, 13(12):2730-2731, 1978.
[ http ]
[331] T.R. Anantharaman, P. Ramachandrarao, C. Suryanarayana, S. Lele, K. Chattopadhyay, G.V.S. Sastry, and H.A. Davies. Rapid quenching of aluminum alloys. In Proceedings of the 3rd International Conference on the Rapidly Quenched Metals, volume 1, page 126. The Metals Society London, 1978.
[332] S.N. Ojha, K. Chattopadhyay, and P. Ramachandrarao. Solidification of eutectic alloys over a heat pipe. In Proceedings of the 3rd International Conference on the Rapidly Quenched Metals, volume 1, page 119. The Metals Society London, 1978.
[333] S.N. Ojha and K. Chattopadhyay. Electron-microscopic investigation of liquisol quenched monotectic aluminum-indium alloys. Transactions of Indian Institute of Metals, 31:208, 1978.
[334] K. Chattopadhyay and P. Ramachandrarao. Phase transitions in rapidly solidified al-2%pt alloys. Bulletin of Elecron Microscope Society of India, 2:37, 1978.
[335] S.K. Tiwari, K. Chattopadhyay, C. Suryanarayana, and T.R. Anantharaman. Structure of splat cooled aluminum-30%magnesium alloys. Bulletin of Elecron Microscope Society of India, 2:35, 1978.
[336] T.R. Anantharaman, P. Ramachandrarao, C. Suryanarayana, S. Lele, and K. Chattopadhyay. Structure and constitution of rapidly solidified aluminum alloys - II. Transactions of Indian Institute of Metals, 30:434, 1977.
[337] T.R. Anantharaman, P. Ramachandrarao, C. Suryanarayana, S. Lele, and K. Chattopadhyay. Structure and constitution of rapidly solidified aluminum alloys - general assesment. Transactions of Indian Institute of Metals, 30:423, 1977.
[338] T.R. Anantharaman and K. Chattopadhyay. Undercooled casting - a new horizon in foundry technology. Indian Foundry Journal, August:5, 1977.
[339] T.R. Anantharaman and K. Chattopadhyay. Structure and properties of rapidly solidified steels and ternary alloys. Tools and Alloy Steels, 11:19, 1977.
[340] K. Chattopadhyay and P. Ramachandrarao. Multiply twinned particles in an aluminium-nickel vapour deposit. Journal of Crystal Growth, 36(2):355-357, 1976.
[ http ]
[341] K. Chattopadhyay, S. Lele, P. Ramachandrarao, and T.R. Anantharaman. Crystal structure of a metastable aluminum-nickel phase obtained by splat cooling. In Proceedings of the 2nd International Conference on the Rapidly Quenched Metals, page 157. M.I.T. Press, 1976.
[342] K. Chattopadhyaya and P. Ramachandrarao. The structure of a eutectic alloy solidified over a heat pipe. Scripta Metallurgica, 8(9):1083 - 1087, 1974.
[ http ]

This file has been generated by bibtex2html 1.79