| 1.POST DOCTORAL FELLOWS |
|---|
 |
Dr. Apu Sarkar Post Doctoral Fellow (2007-2008). |
| Prior Education: Ph. D. (Physics), Variable Energy Cyclotron Centre, Kolkata. | |
| Research Topics: Microstructure of materials by X-ray diffraction line profile analysis, Recrystallization texture. | |
| current position: Post-Doctoral research Scholar at Department of Nuclear Engineering, North Carolina State University, USA | |
| email: apusarkar@gmail.com |
 |
Dr. Benoit Beausir Post Doctoral Fellow (2008). |
| Current Position: Assistant Professor, University of Lorraine, Metz, France | |
| email: benoit.beausir@univ-lorraine.fr | |
| benoitbeausir.free.fr/ |
 | Dr. S. Giribaskar |
| Designation: Post Doctoral Fellow (2012) | |
| Research Topics: Severe Plastic Deformation of Titanium based alloys | |
| email:sgbaskar@platinum.materials.iisc.ernet.in, sgbaskar@gmail.com | |
| Phone no:+91 - 9731988110 |
 |
Dr. Devinder Yadav (jointly with Prof. Satish V. Kailas) |
| Designation:Post doc. Fellow (2015-2016) | |
| Prior Education: PhD from Metallurgical and Materials Engineering Dept.(IIT Madras) | |
| Research Topics: Friction stir processing/welding. | |
| Current Position: Assistant Professor, IIT Patna | |
| email:deven3042@gmail.com |
 |
Dr. M. Suresh |
| Designation: Post Doctoral Fellow (2012-) | |
| Education : Ph.D (Metallurgical and Materials Engg.)NIIST (CSIR) Thiruvananthapuram | |
| Research Topic: Processing- Microstructure-Texture relationship in Mg and Al-alloys | |
| email: sureshm@platinum.materials.iisc.ernet.in, sureshmfg@yahoo.com |
 |
Dr. Sumeet Mishra Post-doctoral fellow (2017-2019) |
| Education: Ph.D (Metallurgical & Materials Engg Dept) IIT Kanpur | |
| Research Topic: Incremental forming of Al and Ti alloys | |
| Current Position: Post-doctoral fellow at University of Manchester | |
| email: sumeet.igit@gmail.com |
 |
Dr. Lailesh Kumar Post-doctoral fellow (2017-2019) |
| Education: Ph.D (Metallurgical & Materials Engg Dept) NIT Rourkela | |
| Research Topic: Development of Ultafine Grain Materials | |
| Current position: Post-doctoral fellow, Materials engineering, Seoul National University, South Korea | |
| email: kumarlailesh.mit@gmail.com |
 |
Dr. Anish Karmakar National Post-doctoral fellow (2017-2018) |
| Education: Ph.D. (Dept. of Metallurgical and Materials Engineering), IIT Kharagpur | |
| Research Topic: Assistant Professor, Department of Metallurgical & Materials Engineering, IIT Roorkee | |
| email: anish.met@gmail.com, anishfmt@iiitr.ac.in |
 |
Dr. Khushbu Dash Post Doctoral Fellow (2017 - 2019) (jointly with Prof. Kamanio Chattopadhyay) |
| Education: Ph.D (Metallurgical & Materials Engg Dept) NIT Rourkela, postdoctoral studies (University of Oxford, 2015) (Charles University, Prague, 2014) | |
| Research Topic: Microstructure and texture of multi-nanolayered bimetallic composites | |
| email: khushbudash@gmail.com, khushbu@platinum.materials.iisc.ernet.in |
 |
Dr. Karthik Dhandapani (jointly with Prof. Chandan Srivastava) |
| Education: Ph.D., (Physics) VIT University, Vellore | |
| Research Topic: Phase transformation and textures in laser-peened steels | |
| Current Position: Post-doctoral fellow, State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China | |
| email: karthik25587@gmail.com |
 |
Dr. Raghavendra K G (Nov. 2017- Feb. 2019) |
| Prior education: Ph.D (Physical Sciences), HBNI, IGCAR Kalpakkam | |
| email: kgraghu123@gmail.com |
 |
Dr. Rajesh Kumar Rai (Jointly with Prof. D. Banerjee) |
| Prior-education: Ph.D (Materials Engineering) NML Jamshedpur | |
| Current Position: Assistant Professor, Department of Metallurgical & Materials Engg.,MNIT Jaipur | |
| email: rajeshkumar.rai1@gmail.com |
 |
Dr. Sumit Ghosh Post-doctoral fellow (2019) |
| Prior education: Ph.D. (Metallurgical and Materials Engineering 2013-2018), IIT Roorkee | |
| Research Topic: Characterization and surface engineering of metallic samples prepared by 3D printing | |
| Current position: Postdoctoral Researcher, Materials and Mechanical Engineering, Centre for Advanced Steels Research, University of Oulu, Finland | |
| email: sumit.rkvm@gmail.com |
 |
Dr. Srijan Acharya Post Doctoral Fellow (2007-2008). (Jointly with Prof. Kaushik Chatterjee) |
| Prior Education: Ph. D. Materials Engineering,IISc-2019. | |
| Research Topics: Processing-Microstructure-Property Relationship in Biomedical Grade Ti-alloys | |
| Current position: Post-Doctoral Research Fellow at Technion-Israel Institute of Technology | |
| email: srijanacharya@gmail.com |
 |
Dr. Anindya Das Post Doctoral Fellow (2020-2021). (Jointly with Prof. Kaushik Chatterjee) |
| Prior Education: Ph.D (Materials Engineering, 2019) IIT Kharagpur + CSIR - NML, Jamshedpur | |
| Research Topics: Structure-property correlation of additive manufactured alloys | |
| Current position: Post-Doctoral Researcher at Polytechnique Montreal | |
| email: anindyadvc@gmail.com |
 |
Dr. Aman Gupta Post Doctoral Fellow (2020-2021). |
| Prior-education: Ph.D. (Metallurgical and Materials Engineering (2016-2020), VNIT-Nagpur | |
| Research Topics: Hot deformation behaviour and creep properties of Refractory Complex Concentration Alloys (RCCAs) | |
| Current position: Research Professor, Suncheon National University | |
| email: amang@iisc.ac.in, amangpta@gmail.com |
 |
Dr. Neera Singh |
| Designation: C V Raman Post Doctoral Fellow (Aug 2020- ) | |
| Prior-education: Ph.D (Ceramic Engineering) IIT(BHU) Varanasi | |
| Research Topic: Additive Manufacturing, Processing- property correlation of Ti-alloys and Composites | |
| email: neerasingh@iisc.ac.in, neerasingh1191@gmail.com |
 |
Dr. Kasturi Sala |
| Designation: Research Associate | |
| Prior-education: Ph. D Materials Engineering, IIT Kharagpur, | |
| Research Topic: Structure-property Correlation of Nb based Silicide based alloys | |
| email: kasturisala@iisc.ac.in,kupu1992@gmail.com |
| 2. DOCTORAL STUDENTS |
|---|
 |
Dr. Nilesh Prakash Gurao Ph.D. (2005-2010). |
| Prior Education: B.E. (Metallurgical Engineering), V.N.I.T. Nagpur | |
| Research Topics: Texture evolution in metals and alloys, Crystal plasticity,Electron microscopy. | |
| Current position: Assistant Professor, IIT Kanpur. | |
| email: npgurao@iitk.ac.in |
 |
Dr. Somjeet Biswas Ph.D. (2006-2010) |
| Prior Education: M.Tech (Materials Engg.) Jadavpur University, Kolkata, (2005). | |
| Research Topics: Texture evolution in metals and alloys,Ultra fine grain materials,Light alloys,Texture-mechanical property correlation. | |
| Current position: Assistant Professor, IIT Kharagpur. | |
| email: somjeetbiswas@gmail.com |
 |
Dr. P. Ramesh Narayanan Ph.D. (inducted in 2008-completed in 2010) (jointly with Prof. S. Ranganathan) |
| Prior Education: M. Tech. (Metallurgical Engineering), I.I.T. Bombay | |
| Research Topics: Materials Characterisation, Failure Analysis, Texture and Residual stresses in materials, Structure-property Correlation. | |
| Current position: Head, MCD/MMG, VSSC, ISRO, Trivandrum | |
| email: rameshnarayananp@yahoo.co.in |
 |
Dr. Shibayan Roy Ph.D. (2006-2011) |
| Prior Education: M. Tech. (Materials and Metallurgical Engineering), I.I.T. Kanpur | |
| Research Topics: Texture evolution in metals and alloys, Titanium alloys, Processing-texture correlation. | |
| Current Position: Assistant Professor, Materials Science Center, IIT Kharagpur | |
| email: royshiba@gmail.com |
 |
Dr. Suresh K S Ph.D. (2007-2012) |
| Prior Education: M. Tech. (Materials and Metallurgical Engineering), I.I.T. Kanpur | |
| Research Topics: Shape memory alloys, Deformation, recrystallization and transformation texture evolution, Electron microscopy. | |
| Current position: Assistant Professor, IIT Roorkee | |
| email: santharamsuresh@gmail.com |
 |
Dr. Madhavan Radhakrishnan Ph.D. (2008-2014) |
| Prior Education: B. Tech. (Metallurgical Engineering), NIT Tiruchirapally | |
| Research Topic: Synthesis-processing- texture- property correlation in Ni & Ni-Co alloys | |
| Current position: Post-doctoral Fellow at Department of Nuclear Engineering, University of New Mexico | |
| email: madhavan@platinum.materials.iisc.ernet.in, rkmadhav@unm.edu |
 |
Dr. Naresh Narayanan Ph.D. (2015) (jointly with Prof. Satish V. Kailas) |
| Prior Education: B. Tech. (Mechanical Engineering), Govt. Engg. College, Trissur | |
| Research Topic: Structure-property correlations in ultra-fine grain aluminium alloys processed through friction stir processing (FSP). | |
| Current Position: Research Associate, Department of Materials Engineering, IISc Bangalore | |
| email: nareshnn@mecheng.iisc.ernet.in, naresh245gec@gmail.com |
 |
Dr. Ram krushna Sabat Ph.D. (2015) |
| Prior Education: B. Tech. (Metallurgical and materials Engineering), NIT Rourkela | |
| Research Topic: Processing-microstructure-texture-property relationship in Ce containing magnesium alloys | |
| Current position: Assistant Professor, Minerals, Metallurgical and Materials Engg. Department, IIT Bhubaneswar | |
| email: madhavan@platinum.materials.iisc.ernet.in, rsabat@iitbbs.ac.in |
 |
Dr. Amit Sharma Ph.D. (2016) (jointly with Prof. S. Mohan) |
| Research Topic: Development of crystallographic texture in ferromagnetic and thermal thin film shape memory alloys for MEMS based device fabrication | |
| Current position: Postdoc scientist EMPA Laboratories, Thun Switzerland | |
| email: amitni10@platinum.materials.iisc.ernet.in |
 |
Dr. Atanu Chaudhuri Ph.D. (2016) |
| Education: Ph.D (Materials Engg Dept) IISc Bangalore. | |
| Research Topic: Hot deformation behaviour of some Niobium and Molybdenum based alloys | |
| Current position: R&D Engineer, ABB global industrial services pvt ltd. Hyderabad | |
| email: atanu@platinum.materials.iisc.ernet.in |
 |
Dr. Amlan Kar Ph.D. (2011-2017) (jointly with Prof. Satish V. Kailas) |
| Prior Education: M.Tech. (Metallurgical and materials engineering) IIT Madras | |
| Research Topic: A study of optimization and micro-mechanism in friction stir welding of aluminum to titanium | |
| Current position: Assistant Professor, Dept. of Mechanical Engineering, IIT Dhanbad. |
 |
Dr. Rajib Kalsar Ph.D. (2012-2017) . |
| Research Topic: Evolution of Microstructure and Texture in Manganese Steels | |
| Current position: Post-doctoral Fellow at Pacific Northwest National Laboratory, Richland, Washington, USA | |
| email: rajibk166@gmail.com, rkphd12@platinum.materials.iisc.ernet.in |
 |
Dr. Anuj Bisht Ph.D. (2012-2017) (jointly with Prof. Jagadeesh Gopalan) |
| Research Topic: Response of shock loading on microstructural and texture evolution in close packed metallic materials. | |
| Current position: Post-doctoral Fellow at Department of Materials Science and Engineering, Technion - Israel Institute of Technology, Haifa Israel | |
| email: toninegi01@gmail.com |
 |
Dr. Sumit Bahl Ph.D. (2012-2017) (jointly with Dr. Kaushik Chatterjee) |
| Research Topic: Nanoscale surface engineering of metallic biomaterials for enhancement of mechanical and biological responses | |
| Current position: Post-doctoral Research Associate at Oak Ridge National Laboratory, USA. | |
| email: sumitbahl07@gmail.com |
 |
Dr. Abhishek M More Ph.D. (2014-2017) |
| Prior education: M. Tech (physical Metallurgy), B.E (metallurgy), COEP | |
| Research Topic: Control of texture and microstructure in Aluminium-Lithium alloy AA2195 and its response on mechanical properties | |
| Current position: Assistant Professor, College of Engineering, Pune |
 |
Dr. Chandra Shekhar P Ph.D. (2011-2018) (jointly with Prof. Subodh Kumar) ) |
| Research Topic: Development of wrought Mg-Li based alloys with improved strength and ductility | |
| Current position: Post Doctoral Fellow at Materials Engineering (Apr, 2019-) , IISc Bangalore | |
| email: pcrnigh@gmail.com, chandrap@iisc.ac.in |
 |
Dr. Nitish Bibhanshu Ph.D. (2014-2019) |
| Prior-education: B. Tech. (Metallurgical and Materials Engineering), NIFFT Ranchi | |
| Research Topic: Solidification, Phase Transformation and Hot Deformation of Titanium Aluminide | |
| Current position: Post-doctoral Research Associate at Oak Ridge National Laboratory, USA. | |
| email: nitishbibhanshu@gmail.com |
|
Dr. Srijan Acharya Ph.D. (2014-2019) |
| Prior-education: B.Tech. (Metallurgy and Materials Engineering), IIEST Shibpur; M.Tech (Materials Engineering), IIT Kharagpur | |
| Research Topic: Processing-Microstructure-Property Relationship in Biomedical Grade Ti-alloys | |
| Current position: Post-doctoral fellow at Technion-Israel Institute of Technology. | |
| email:srijanacharya@gmail.com |
 |
Dr. Krishna Verma Ph.D. (2014-2020) |
| Prior-education: B.Tech. (Metallurgical and Materials Engineering), NIT Warangal | |
| Research Topic: Development of Wrought TZ73 Magnesium Alloy | |
| Current position: Post-Doctoral Research Associate at Ames National Laboratory, USA. | |
| email:krishnakv@iisc.ac.in |
 |
Dr. Yazar K U Ph.D. (2015-2021) |
| Prior-education: B.Tech. (Mechanical Engineering), Amrita University; M.Tech (Materials Science), IIT Bombay | |
| Research Topic: Dwell Fatigue of Titanium Alloy | |
| Current position: Assistant Professor, VIT Vellore. | |
| email:yazar1988@gmail.com |
 |
Dr. Deepak Kumar Ph.D. (2017-2023) |
| Prior-education: B.Tech. (Metallurgical and Materials Engineering),NIFFT Ranchi | |
| Research Topic:Microstructure-Texture-Property corelation in additively manufactured alloys | |
| Current position:Post-doctoral fellow at Purdue University, USA. | |
| email:deepakk@iisc.ac.in, deepakradhapandey@gmail.com |
 |
Dr. R J Vikram Ph.D. (2017-2023) |
| Prior-education: B.Tech. (Metallurgical and Materials Engineering),IIT Madras | |
| Research Topic:High temperature mechanical behavior of Additively manufactured High entropy alloys and IN718 | |
| Current position:Post-doctoral fellow at University of Michigan, USA. | |
| email:vikramraja92@gmail.com |
| 3. MASTER STUDENTS |
|---|
 |
Rohini Garg M.Sc. (2007) (jointly with Prof. S. Ranganathan) |
| Prior Education: M. Sc. (Solid State Physics), I.I.T. Delhi | |
| Research Topics: 3 Dimensional Microstructural Characterization. | |
| Current position: Scientific officer, Bhabha Atomic Research Centre |
 |
Krishna Reddy Jonnala M.E. (2007) |
| Prior Education: B.E. Metallurgical Engineering, NIT Warangal (2005). | |
| Research Topics: Texture evolution in metals and alloys, Ultra fine grain materials, steels. | |
| Current position:TVS Motors, Hosur. |
 |
Shishir Jain M.E. (2007) |
| Prior Education:B.E. Metallurgical Engineering, IIT Roorkee, (2003). | |
| Research Topics: Investigation on 3 Dimensional morphology of α and β phases in a two phase titanium alloy. | |
| Current position:TVS Motors, Hosur. |
 |
Ayan Bhowmik M.E. (2008) |
| Prior Education: B.E. Metallurgical Engineering, jadavpur university, (2006). | |
| Research Topics: Texture evolution in metals and alloys, ultra fine grain steels. | |
| Current position:Assistant Professor, Department of Materials Science and Engineering, IIT Delhi. | |
| email: ayan99@gmail.com ab754@cam.ac.uk |
 |
Segolene De Waziers M.E. (Toulouse University, France), (2008) |
| Prior Education: B.E. (Materials Engineering) Toulouse University FRANCE (2006). | |
| Research Topics:Texture evolution in B-modified Titanium Aluminides. |
 |
Subhasis SinhaM.E. (2009) |
| Prior Education: B.E. Metallurgical Engineering, jadavpur university, (2007). | |
| Current position:Assistant Professor, Department of Metallugical Engineering, IIT-BHU | |
| Research Topic:Grain boundary engineering of modified Super–304H Austenitic Steel | |
| email: ssinha.met@iitbhu.ac.in, sinha.subhasis@gmail.com |
 |
Pankaj Kumar M.E. (2010) |
| Prior Education: B.E. Metallurgical Engineering, VNIT, Nagpur, (2006). | |
| Current position:Ph.D. Student, University of Utah, Salt lake City, Utah, USA. | |
| Research Topic: Processing-microstructure-texture correlation in high carbon steels | |
| email: vnit_panks@yahoo.co.in |
 |
P. Arun Dinesh M.E. (2010) |
| Prior Education: B.E. Metallurgical Engineering, NIT, Durgapur, (2006). | |
| Research Topic: Accumulative roll bonding of aluminium and magnesium alloys |
 |
G. Kannan M.E. (2010) (jointly with Prof. M. K. Surappa) |
| Prior Education: B.E. PSG Tech, Coimbatore | |
| Research Topic : Deformation and recrystallization behaviour of Mg/Mg-alloy SiC composites |
 |
Aviral Madhup M.E. (2011) |
| Prior Education: B.Tech. from NIFFT Ranchi | |
| Research Topic: Accumulative roll bonding of magnesium alloys | |
| Current position: Associate Technical Lead, Applied materials |
 |
Sajal Hatwal M.E. (2011) |
| Prior Education: B.E. GB Pantnagar University | |
| Research Topics: Multi-axial forging of pearlitic steel | |
| Current position:Uttarakhand Power Corporation Ltd | |
| email: sajal.gbpec@gmail.com, sajalhatwal@yahoo.in |
 |
Nachiketa Ray M.E. (2012) |
| Prior Education: B-Tech, Ceramic Technology, University of Calcutta | |
| Research Topics:Shock wave processing of aluminium alloy 5086. | |
| Current position: Ph.D. K. U. Leuven, Belgium | |
| email: nachiketa.ray.1014@gmail.com |
 |
Shekhar Tapase M.E. (2012) (jointly with Dr. G. S. Avadhani) |
| Prior Education: B.E. College of Engineering, Pune | |
| Research Topic:Processing-texture-mechanical property correlation in WE43 alloy. | |
| Current position: Senior Engineer, Bharat Forge | |
| email: shekhar.tapase@gmail.com |
 |
Mandali Poshit Nag |
| Prior Education: B. Tech. (Metallurgical and Materials Engg) NIT Raipur | |
| Research Topic: Understanding texture and functional property relationships in thin films | |
| email: poshit@ platinum.materials.iisc.ernet.in |
 |
K. Sahithya (jointly with Dr. G.S. Avadhani) |
| Prior Education: B. Tech. (Metallurgical and Materials Engineering) NIT Bhopal | |
| Research Topic: Processing-property relationship in high temperature magnesium alloy | |
| email: sahithya08@gmail.com |
 |
Sudipta Pramanik ME (2012-2014) |
| Prior Education: B.E. (Metallurgical and Materials Engg) IIEST, Shibpur | |
| Research Topics: Development of low density steels and their processing-texture-property relationship | |
| Current position: Post-Doctoral Fellow at University of Paderborn, Germany | |
| email: spramanikiisc@platinum.materials.iisc.ernet.in |
 |
Subrato Panda (jointly with Dr. G.S. Avadhani) |
| Prior Education: B. Tech. (Ceramic Engineering), University of Calcutta | |
| Research Topics: Texture-property relationship in some titanium alloys | |
| Current position: PhD from Materials Science and Engineering Nancy (University of Lorraine), France | |
| email: panda@platinum.materials.iisc.ernet.in |
 |
Pund Tushar Shivaji ME (2013-2015) |
| Education: B.Tech from College of Engineering, Pune | |
| Research Topics:Development of Nano-Pearlitic Steels, Processing-Microstructure-Property correlation I Low density steel | |
| Current Position: Application Engineer, Applied Materials | |
| email:tushar.pund.007@gmail.com |
 |
Nikki Ramesh Kamble ME (2013-2015) (jointly with Dr. G.S. Avadhani) |
| Education: B.Tech (Metallurgy and Materials Engineering) , VNIT Nagpur | |
| Research Topics:Hot deformation processing of magnesium alloys | |
| Current Position: Design Engineer, General Electric-Bangalore | |
| email: nikkikamble@gmail.com |
 |
Subhash Kumar ME (2014-2016) |
| Education: B.Tech. (Metallurgy and Materials Engineering), IIT Kharagpur. | |
| Research Topic: Study of texture and microstructure evolution during high temperature and high strain rate deformation of HCP materials | |
| email:subhash160794@gmail.com |
 |
Awadh Kishor Gupta ME (2014-2016) (jointly with Dr. G.S. Avadhani) |
| Prior education: B.Tech (Metallurgy and Materials Engineering), NIFFT Ranchi | |
| Research Topic: Effect of alloying addition on interlammelar spacing in pearlitic grade steel | |
| Current Position: Manager, Tata Steel | |
| email:akgupta5109@gmail.com |
 |
Himanshu Singh ME (2015-2017) |
| Prior education: B.Tech. (Metallurgy and Materials Engineering), IIT Roorkee | |
| Research Topic: Severe plastic deformation of Al-Cu-Li alloy by accumulative roll bonding | |
| Current Position:Senior Quality Assurance Engineer, Lam research, Bangalore | |
| email:hmnshu11@gmail.com |
 |
Basavaraj P Kalinganavar (ME 2015-2017)(jointly with Dr. G.S. Avadhani) |
| Prior education: B.Tech (Metallurgical and Materials Engineering), NITK Surathkal | |
| Research Topic:The Effect of Alloying additions and Heat-treatment on the Mechanical Properties of Nano-pearlitic steel and Optimization of Hot Workability by developing a Processing map | |
| Current Position: Manager, Tata Steel | |
| email: basavaraj.nitk@gmail.com |
 |
Natasha Prasad ME (2016-2018) (jointly with Dr. G. S. Avadhani) |
| Prior education: B.Tech. (Metallurgy and Materials Engineering), NIT Raipur | |
| Research Topic: Study of deformation and recrystallization behavior in High Entropy Alloy (CoCuFeMnNi) | |
| Current Position: Application Engineer, Applied Materials Pvt Ltd | |
| email:prasadnatasha26@gmail.com |
 |
Pramod Kumar Singh ME (2016-2018) |
| Prior education: B.Tech. (Metallurgical and Materials Engineering), NIT-Srinagar | |
| Research Topic: The effect of alloying addition on the Microstructure and Mechanical Properties of Ferritic-Pearlitic Steels and the Study of Hot Deformation Behavior | |
| Current Position: Engineer, Airbus group India Pvt Ltd | |
| email:psomsai@gmail.com |
 |
Vaskuri chandra sekhara theja ME (2016-2018) |
| Prior education: B.Tech. (Metallurgical and Materials Engineering), RGUKT-Nuzvid | |
| Research Topic: Mechanical Behavior of Medium Mn-TWIP steels for automotive applications | |
| Current Position: PhD, City University of Hongkong |
 |
Rushikesh Kailas Sabban MS (2016-2018) (jointly with Dr. Kaushik Chatterjee) |
| Prior education: B.tech(metallurgical Engineering), College of Engineering Pune | |
| Research Topic: Tailoring of Mechanical-Biological-Electrochemical response of 3-D printed Titanium alloys for Biomedical application | |
| Current Position: Research Scholar at Department of Metallurgical and Materials Engineering, IIT Madras | |
| email: rushisabban555@gmail.com |
 |
KAYYAM SAI PRANAY TEJA ME (2017-19) (jointly with Dr. G. S. Avadhani) |
| Prior education: B.Tech (Metallugical and Materials Engineering),VNIT nagpur | |
| Research Topic: Optimization of Mechanical Properties of Rail Steel by Thermo-Mechanical-Treatment | |
| Current Position: Manager, TATA Steel, Jamshedpur | |
| email: pranay0721@gmail.com |
 |
Shamitha Sri Muduru ME (2018-2020) |
| Prior-education: B.Tech (Metallurgical Engineering) JNTU Hyderabad | |
| Research Topics: Effect of microstructure on dwell-fatigue of titanium alloy | |
| Current Position: Senior Application Engineer, Applied Materials Inc. | |
| email: shamithasri123@gmail.com |
 |
Kukkala Prasanna Kumar Reddy ME (2019-2021) |
| Prior-education: B.Tech (Metallurgical & Materials Engineering) NIT Warangal | |
| Research Topics: Spark Plasma Sintering of Orthopaedic Beta-Ti (TNZT)Alloy | |
| Current Position: Senior Application Engineer, Applied Materials Inc. | |
| email: prasannakr@iisc.ac.in |
 |
Sagar Gupta ME (2019-2021) |
| Prior-education: B.Tech (Metallurgical & Materials Engineering) MNIT Jaipur | |
| Research Topics: Recrystallization simulation using Cellular Automata | |
| Current Position: PhD, Georgia Tech, Atlanta,USA | |
| email: sagargupta@iisc.ac.in |
 |
Niranjan Tanneer ME (2020-2022) |
| Prior-education: B.Tech (Metallurgical & Materials Engineering) IIT Roorkee | |
| Research Topics: Effect of crystal orientation on microstructure and texture of shock loaded AM30 magnesium alloy | |
| Current Position: Scientist B, DRDO | |
| email:niranjant@iisc.ac.in |
 |
Kunapuli Susmitha ME (2020-2022) |
| Prior-education: B.Tech (Metallurgical & Materials Engineering) NIT Rourkela | |
| Research Topics:Wire Arc Additive Manufacturing of Copper Cladding on SS316 | |
| Current Position: Data Analyst,Gadfly | |
| email: kunapulis@iisc.ac.in |
 |
A Kiruthika ME (2020-2022)(jointly with Dr. Dheepa Srinivasan, Pratt& Whitney R& D Center, Bangalore |
| Prior-education: B.Tech (Metallurgical & Materials Engineering) NIT Tiruchirapalli | |
| Research Topics: Microstructural characterization, mechanical and corrosion behaviour of additively manufactured alloys | |
| Current Position:Deputy Manager, Adani Enterprises Limited | |
| email: kiruthikaa@iisc.ac.in |
 |
Rashmi Ranjan Sethi ME (2020-2022)(jointly with prof.Subhodh Kumar) |
| Prior-education: B.Tech (Metallurgical & Materials Engineering) Parala Maharaja Engineering College, Berhampur | |
| Research Topics: Effect of asymmetric rolling on magnesium alloy AM 30 | |
| Current Position: Tata Steel | |
| email: rashmiranjan@iisc.ac.in |
 |
Deepika Kumari Sahu ME (2020-2022)(jointly with prof.G.S.Avadhani) |
| Prior-education: B.Tech (Metallurgical & Materials Engineering) NIT Jamshedpur | |
| Research Topics: High Temperature Study of High Entropy Alloy(Cantor Alloy) | |
| Current Position: Graduate Engineering Trainee, NALCO | |
| email: deepikaks@iisc.ac.in |
| 4. UG STUDENTS |
|---|
 |
Deepak Kumar M.S. (2019) |
| Research Topic: INVESTIGATION ON THE ORIENTATION - BASED DEFORMATION MECHANISM TO EXPLORE THE PROCESSING STRATEGY FOR TITANIUM ALUMINIDE | |
| Current position: M.Tech. Department of Metallugical and Materials Engineering, Defence Institute of Advance Technology | |
| email:deepak.rehan96@gmail.com |
 |
Shirin Pullot B.S. (2019) |
| Research Topics: High temperature deformation behavior of electron beam melted IN718 | |
| email:shirinp@iisc.ac.in |
 |
LOYID LAWRENCE |
| Designation: Bachelor of Science (Research) 2020 | |
| Research Topics: Modelling and study of recrystallization behaviour in FCC metals and alloys | |
| email: loyid.iisc@gmail.com |
 |
Gokulnath.S.A. |
| Designation: Master of Science (Research), | |
| Research Topics: Study on INCONEL 718 Superalloys | |
| email: sagokulnath98@gmail.com |