Publications in
the year – 2003
1.
|
Acharya, S. and Hajra, J.P. Applicability of multiparameter
formalism in interpreting the thermodynamic behaviour
of ternary systems Trans. Ind. Inst .Metals
(2003). |
2.
|
Avadhani, G.S. Optimization of process parameters for the
manufacturing of rocket casings : A study using processing maps ASM
International 12(6) (2003)609-622. |
3.
|
Azeem,
M.A. and Kumar, S. Creep
behaviour of short fibre
reinforced QE22 magnesium alloy using impression creep test Proc. 4th Conference on
Creep, Fatigue and Creep-Fatigue Interaction, IGCAR, |
4.
|
Basu, J. and Ranganathan,
S. Bulk metallic glasses : A new class of engineering
materials Sadhana 28 (2003) 783-798. |
5.
|
Basu, J., Nagendra,
N., Li, Y. and Ramamurty, U. Microstructure and mechanical properties of a
partially crystallized La-based bulk metallic glass Phil.
Mag. 83 (2003) 1747-1760. |
6.
|
Basu, J., Louzguine,
D.V., Inoue, A. and Ranganathan, S. Nanocrystallisation
and nanoquasicrystallisation in (Ti/Hf)-Zr-(Ni/Cu) ternary alloys Mat.
Res. Soc. Symp. Proc. Vol. 754 (2003)
Materials Research Society, pp. 411-416. |
7.
|
Bhattacharyya,
S. and Abinandanan, T.A. A
study of phase separation in ternary alloys Bull.
Mater. Sci. 26 (2003) 193-197. |
8.
|
Bhowmick, S., Kale, A.N., Jayaram, V. and Biswas, S.K. Contact
damage in TiN coatings on steel Thin Solid Films 436 (2003) 250-258. |
9.
|
Blawert, C., Morales, E., Dieringa, H., Hort, N., Azeem, M.A. and
Kumar, S. Corrosion
and wear properties of short-fiber reinforced QE22 magnesium alloy Proc. 14th Symposium Verbundwerkstoffe und Werkstoffeverbunde,
|
10.
|
Bysakh, S.,
Das, P. and Chattopadhyay,
K. Evolution
of metastable phases during crystallization of
pulsed laser deposited amorphous Al-Fe films J. Mater. Res. 18 (2003) 284-295 |
11.
|
Bysakh, S., Mitra,
S.K. Phanikumar, G., Majumdar,
J., Dutta, P. and Chattopadhyay,
K. Characterization of microstructure in laser
surface alloyed layers of aluminium on
nickel Metall. and Mater. Trans. 44A
(2003) 2621-2631. |
12.
|
Chandraprabha, M.N., Modak, J.M., Natarajan, K.A.
and Raichur, A.M. Modeling and analysis of biooxidation
of gold bearing pyrite-arsenopyrite concentrates by
Thiobacillus ferrooxidans Biotechnol. Prog. 19
(2003) 1244-1254. |
13.
|
Chandraprabha, M.N., Modak, J.M. and Natarajan, K.A. Experimental and modeling studies on inhibition effect
of solution conditions on activity of Acidithiobacillus ferrooxidans during biooxidation
of mixed sulphidic concentrates Proceedings of the
International Biohydometallurgy Symposium (IBS
2003) |
14.
|
Chattopadhyay, K. and Bhattacharya, P. Studies on materials with embedded nanoscale particles Materials
Research : Current Scenario and Future Projections, (Eds.)
R. Chidambaram and S. Banerjee, Allied Publishers
Pvt. Ltd., New Delhi, (2003) pp.
131-156. |
15.
|
Chattopadhyay, K., Ravishankar,
N., Abinandanan, T.A. and Varghese, V. Understanding milling induced changes : Some
results Proc.
Indian Acad. Sci. (Chem. Sci.)
115(5–6) (2003) 727-740. |
16.
|
Chattopadhyay, K. Behaviour
of embedded metals and alloys at small sizes Proc.
Workshop on ‘Modeling of Nano and Smart Materials,
UGC-CAS in Fluid Mechanics, Bangalore University, vol. 28-29 (2003)
pp. 94-99. |
17.
|
Chattopadhyay, K. and Bhattacharya, V. Nanoembedded
materials : A canvas for new materials design In
Advanced Materials, (Eds.) L.C. Pathak, K. Venkateswarlu, Amitava Bandopadhyay and A.K. Ray, Allied Publishers Private
Ltd., New Delhi,( 2003) pp. 1-11. |
18.
|
Chockalingam, E., Subramanian, S. and
Natarajan, K.A. Studies on biodegradation of organic flotation
collectors using Bacillus polymyxa Hydrometallurgy
71 (2003) 249-256. |
19.
|
Chockalingam, E., Subramanian, S., Natarajan,
K.A. and
Braun, J.J. Assessment
of acid production potential of sulphide minerals
using Acidithiobacillus ferrooxidans
and microbial sulphate reduction using Desulfotomaculum nigrificans Proceedings of the
International Biohydometallurgy Symposium (IBS
2003) |
20.
|
Chokshi, A.H. Diffusion,
diffusion creep and grain growth characteristics of nanocrystalline
and fine-grained monoclinic, tetragonal and cubic zirconia Scripta Materialia 48 ( 2003) 791-796. |
21.
|
Chokshi, A.H., Yoshida, H., Ikuhara, Y.
and Sakuma, T. The
influence of grain boundary processes in yttria
stabilized tetragonal zirconia Materials Letters 57 (2003) 4196-4201. |
22.
|
Chokshi, A.H. The
influence of grain size on deformation on copper Mater. Sci. Forum 426-432
(2003) 4393-4398. |
23.
|
Choudhury, S., Gandhi, A.S. and Jayaram, V. Bulk,
dense, nanocrystalline yttrium aluminum garnet by
consolidation of
amorphous powders at low temperatures and high pressures J. Am. Ceram. Soc. 86(2)
(2003) 247-251. |
24.
|
Dwarakadasa, E.S. and Sundararajan, S Aluminium
based metal matrix composits by the liquid
metallurgy route – Studies of holding time, remelting
and reclamation Aluminium in |
25.
|
Gandhi, A.S. and Jayaram, V. Plastically
deforming amorphous ZrO2-Al2O3 Acta Materialia 51 (2003) 1641-1649. |
26.
|
Gupta, G.S. and
Bhattacharyya, S. Liquid
holdup in non-wetting packing with lateral gas injection ISIJ Int. 43 (12) (2003) 1927-1935. |
27.
|
Guruvenket, S., Komath, M., Vijayalakshmi, S.P., Raichur,
A.M. and Rao, G.M. Wettability enhancement of polystyrene using electron
cyclotron resonance plasma with argon J. Appl.
Polym. Sci. 90(6) (2003) 1618-1623. |
28.
|
Hajra, J.P., Aldinger, F. and Seifert,
H.J. Derivation
and applicability of the partial functions of the ternary system using
interaction coefficients Steel Grips 1(5) (2003) 353-360. |
29.
|
Hajra, J.P., Aldinger, F. and Seifert,
H.J. Derivation
and applicability of the partial functions of the quaternary system involving
higher order interaction coefficients Steel Grips 1(6) (2003)
433-439. |
30.
|
Hemamalini, T., Subramanian, S. and Natarajan,
K.A. Bioremediation
of chromium using Bacillus polymyxa Proceedings of the
International Biohydometallurgy Symposium (IBS
2003) |
31.
|
Jacob,
K.T. and Attaluri, M. Reinforcement
of thermodynamic data for LaMnO3 J.
Mater. Chem. 13 (2003) 934-942. |
32.
|
Jacob,
K.T. , Lwin, K.T. and Waseda, Y. Phase equilibria in the
systems Ln-Pd-O and thermodynamic properties of Ln2Pd2O5
(Ln=Dy, Ho) Materials
Chemistry and Physics 77(2) (2003) 331-340. |
33.
|
Jacob,
K.T. , Lwin, K.T. and Waseda, Y. Calcium ruthenates
determination of Gibbs energies of formation using electrochemical cells J.
Electrochemical Society 150(4) (2003) E227-E232. |
34.
|
Jacob,
K.T. , Lwin, K.T. and Waseda, Y. Strontium ruthenates
determination of Gibbs energies of formation using electrochemical cells Mater.
Sci. Engg. B103(2) (2003) 152-161. |
35.
|
Jayaram, V. Engineering ceramic composites Materials
Research : Current Scenario and Future Projections, (Eds.)
R. Chidambaram and S. Banerjee, Allied Publishers
Pvt. Ltd., (2003)
pp. 338-344. |
36.
|
Kapilashrami, E, Jacobson, A., Lahiri, A.K., Seetharaman, S. Studies
of wetting characteristics of liquid iron on dense alumina by X-ray sessile
drop technique Metall. Mater. Trans. 3
(2003) 193-199. |
37.
|
Kapilashrami, E., Lahiri, A.K. and Seetharaman,
S. Corrosion
of dense alumina by molten iron containing oxygen Steel Grips 1 (2003) 126-132. |
38.
|
Kavitha, R., Hegde, S. and Jayaram, V. Oxide
films by combustion pyrolysis of solution
precursors Mater. Sci. Engg. A 359 (1-2) (2003) 18-23. |
39.
|
Kishore, Ravikumar, N.L. and Sunil, D. The
effect of a starch envelope on fly ash particles on the impact properties of
filled epoxy composites Advanced Composites
Letters 12 (2003) 45-54. |
40.
|
Kishore, Mahajan,
S. and Kulkarni, S.M. Fractographic features of dry and water absorbed epoxy
based ash filled particulate composites with and without surface treatments
for fillers following short beam test Prakt. Metallogr. 40 (2003)
1
|
41.
|
Kishore, Mahajan,
S. and Kulkarni, S.M. Water ingression and compression properties of
epoxy containing ash particles with their surfaces containing paraffin oil
film J.
Reinforced Plastics and Composites 22 (2003) 1467-1476. |
42.
|
Kottada, R.S. and Chokshi, A.H. Hot
working of an as-cast Mg-2%Al alloy Mater. Sci. Forum 426-432
(2003) 4417-4422. |
43.
|
Kulkarni, S.M. and Kishore Effects of filler content and hygrothermal
ageing on compressive properties of fly ash-epoxy composites J.
Reinforced Plastics and Composites 22 (2003) 973-982. |
44.
|
Kulkarni, S.M. and Kishore Effect of filler-fiber interactions on compressive
strength of fly ash and short-fiber epoxy composites J.
Appl. Polym. Sci. 87 (2003) 836-841. |
45.
|
Kumar,
P.S., Ramachandra, S. and Ramamurty,
U. Effect
of displacement-rate on the indentation behavior of an aluminium
foam Mater.
Sci. Engg. A37 (2003)
330-33. |
46.
|
Kumar, S., Shabadi, R. and Patel, M.M. Influence
of precipitation on serrated flow in Al-5Zn-1Mg alloy Mater. Sci. Tech. 19 (2003) 1344-1348. |
47.
|
Kumar, S., Ingole,
S., Dieringa, H. and Kainer,
K.U. Analysis
of thermal cycling curves of short fibre reinforced
Mg-MMCs Composites Science and Technology
63 (2003) 1805-1814. |
48.
|
Kumar, S., Ingole, S., Dieringa, H. and Kainer, K.U. Thermal
cycling of Mg-MMCs Mater. Sci. Forum 426-432
(2003) 2119-2124. |
49.
|
Lord, E.A. and Mackay,
A.L. Periodic
minimal surface of cubic symmetry Current Science 85 (2003) 346-362. |
50.
|
Louzguine, D.M., Ranganathan, S. and Inoue,
A. Investigations
of glassy and nanostructured metal-metal type
alloys in processing and properties of structural nanomaterials (Eds.) Leon L. Shwa, C. Suryanarayana and Rajiv S. Mishra, TMS, |
51.
|
Misra, M., Raichur,
A.M. and Lan, A.P. Improved flotation of arsenopyrite
by ultrasonic pretreatment Minerals
Metall. Process 20 (2003) 93-97. |
52.
|
Mukherjee, A., Raichur,
A.M., Modak, J.M. and Natarajan,
K.A. Bio-processing
of Minerals
Engineering 16 (2003) 653-658. |
53.
|
Mukherjee, A., Raichur,
A.M., Modak, J.M. and Natarajan,
K.A. A novel bioleaching process to recover valuable
metals from Proceedings of the
International Biohydometallurgy Symposium (IBS
2003) |
54.
|
Natarajan, K.A. and Deo, N. Biotechnology
for iron ore beneficiation and environmental control Proceedings of the International
Conference of Mineral Processing Technology-2003, (Eds.) K.S. Raju, S.K. Ghosh, A. Majumdar, A.K. Nandi, A.T. Sutone and A.S. Bhoge, Allied
Publishers Pvt. Ltd, |
55.
|
Natarajan, K.A. and Das, A. Surface chemical studies on Acidithiobacillus group of
bacteria with reference to mineral
flocculation Int.
J. Miner. Process 72 (2003) 189-198. |
56.
|
Natarajan, K.A. Microbially
induced mineral flotation and flocculation Proceedings of the XXII
International Mineral Processing |
57.
|
Pal, S. and Lahiri, A.K. Mathematical
model of COREX melter gasifier, Part I :
Steady state Model Metallurgical and
Materials Transaction 34 (2003)
103-114. |
58.
|
Pal, S. and Lahiri, A.K. Mathematical
model of COREX melter gasifier,
Part II :
Dynamic Model Metallurgical and
Materials Transaction 34 (2003)
115-119. |
59.
|
Thermodynamic
properties of SmFeO3 (S) and Sm3Fe5O12(S) J. Phase Equilibria 24
(2003) 431-440. |
60.
|
Patra, P. and Natarajan,
K.A. Microbially-induced
flocculation and flotation of pyrite separation from oxide gangue minerals Minerals
Engineering 16 (2003) 965-973. |
61.
|
Phaniraj, M.P. and Lahiri, A.K. The
applicability of neural network model for prediction of flow stress of carbon steel J. Mater. Process Tech. 141 (2003) 219-227. |
62.
|
Ponpandian, N., Narayanasamy, A., Chattopadhyay, K., Raja, M.M., Ganeshan, K., Chinnasamy, C.N. and Jayadevan, B. Low
temperature magnetic properties and acrystallisation
behavior of FINEMET alloys J. Appl.
Phys. 93 (2003) 6182-6187 |
63.
|
Prasad, Y.V.R.K. Processing
Maps: A Status Report J. Materials Engineering
and Performance 12(6) (2003) |
64.
|
Quyang, Lj., Louzguine,
D.V., Kumura, H.M. Ohsuna,
T., Ranganathan, S. and Inoue, A. Influence of icosahedral
clusters on crystallization of Zr55Ni10Al7.5Cu7.5Ti10Ta10
glassy alloy J.
Metastable and Nanocrystalline
Materials 18 (2003) 37-42. |
65.
|
Raichur, A.M. and Vijayalakshmi, S.P. The
effect of nature of raw coal on the adhesion of bacteria to coal surface Fuel
82 (2003) 225-231. |
66.
|
Rajneesh,
S. and Gupta, G.S. Importance of frictional forces on the formation
of cavity in a packed bed under cross flow of gas Powder
Technology 134 (2003) 72-85. |
67.
|
Ramachandra, S., Kumar, P.S. and Ramamurty, U. Energy
absorption characteristics of closed-cell aluminium
foam under low velocity impact Proc.
8th Int.Conf. on
“Plasticity and Impact Mechanics, Impact 2003” (Ed.) N.K. Gupta (2003) pp.
20-31. |
68.
|
Ramachandra, S., Kumar, P.S. and Ramamurty, U. Impact energy absorption in an Al foam at low
velocities Scripta Materialia
49 (2003) 741-745 |
69.
|
Ramamurty, U., Raghavan,
R., Basu, J. and Ranganathan,
S. Microstructural
dependence of mechanical properties of bulk metallic glasses and their
composites Proc.
Symposium on Microstructural Design of Advanced Materials,
(Eds.) M.A. Meyers, R.O. Ritchie and M. Sarikaya,
Elsevier Science Limited, The |
70.
|
Ramanarayan, H. and Abinandanan, T.A. Spinodal decomposition in polycrystalline alloys Physica A 318 (2003)
213-219.
|
71.
|
Ramanarayan, H. and Abinandanan, T.A. Spinodal decomposition in fine grained materials Bull.
Mater. Sci. 26 (2003) 189-192. |
72.
|
Ramanarayan, H. and Abinandanan, T.A. Phase field study of grain boundary effects on spinodal decomposition Acta Materialia
51 (2003) 4761-4772. |
73.
|
Ranganathan, S. and Subramanian, A. Orthorhombic rational approximants for decagonal quasicrystals Bull.
Mater. Sci. 26 (2003) 627-631. |
74.
|
Ranganathan, S., Ramamurty,
U. and Kumar, S. Aluminium
alloy development and design Aluminium in |
75.
|
Ranganathan, S. Alloyed pleasures : Multimetallic
cocktails Current
Science 85 (2003) 1404-1406. |
76.
|
Ranganathan, S. and Subramaniam, A. Quasicrystalline
intermetallics In
Materiais 2000 (Eds.) M. Amaral
Fortes and P.J. Ferreira, Instituto |
77.
|
Ranganathan, S. Wootz
file : Materials and process selection Proc. of the Altech Indo-Norwegian Seminar on Aluminium
Products – Design and Manufacture, (Eds.) D.H. Sastry
and S. Storen, (2003) pp. 35-44. |
78.
|
Rao, M.P.L.N., Gupta, G.S. and Suri,
A.K. Modelling of boron carbide manufacturing process Proc. of EMC 2003,
European Metallurgical Conference, 16-19 Sept.(2003),
|
79.
|
Development
of Expert Systems for the Design of a Hot-Forging Process Based
on Material Workability J. Materials Engineering
and Performance 12(6) (2003) |
80.
|
Microstructural evolution
in liquid metal processed
Al-alloy/SiCp composites Int.
J. Cast Metals Res. 15 (2003) 573-579. |
81.
|
Sahu, S.N., Jeyakumar, M., Kumar, S.
and Gupta, G.S. Modelling of nozzle used in spray forming Proc. 2nd International
Conference on Spray Deposition and Melt Atomization (SDMA 2003) and 5th
International Conference on Spray Forming (ICSF V), Bremen, Germany, (2003)
pp. 8-67- 8-73. |
82.
|
Santhiya, D., Subramanian, S., Natarajan,
K.A. and Indi, S.S. Surface
chemical studies on galena and sphalerite using
mineral-adapted Bacillus polymyxa Proceedings of the XXII
International Mineral Processing |
83.
|
Sarkar, S., Gupta, G.S., Litster, J.D., Rudolph,V., White, E.T. and Choudhary,
S.K. A
cold model study of raceway hysteresis Metall. Mater. Trans. 34B (2003)
183-
|
84.
|
Sarkar, S., Mohan Raj, P., Chakraborty, S., Phanikumar,
G., Chattopadhyay, K. and Dutta,
P. Transport
phenomena in laser surface alloying J. Mater. Sci. 38 (2003) 155-164 |
85.
|
Sastry, G.S.S.R.K., Gupta, G.S.
and Lahiri, A.K. Void
formation and breaking in a packed bed ISIJ
International 43(2) (2003) 153-160. |
86.
|
Sastry, G.S.S.R.K., Gupta, G.S.
and Lahiri, A.K. Cold
model study of raceway under mixed particle conditions Ironmaking and Steelmaking 30(1)
(2003) 61-65. |
87.
|
Shankar, P., Raj,
B. and Ranganathan, S. Electron microscopy techniques in investigating behaviour of nitrogen in austenitic stainless steels In
High Nitrogen Steels (HNS), (Eds.) Markus O. Speidel,
Claudia Kowanda and Markus Diener,
vdf Hochschulverlag AG ad
der ETH Zurich,( 2003) pp. 341. |
88.
|
Shen, Y.L and Ramamurty,
U. Constitutive
response of passivated copper films to thermal
cycling J.
Applied Physics 93 (2003) 1806-1812. |
89.
|
Shen, Y.L. and Ramamurty,
U. Temperature-dependent inelastic response of passivated copper films : Experiments, analyses, and
implications J.
Vac. Sci. Technol B24 (2003) 1258- |
90.
|
Singh,
R. and Jacob, K.T. Calculation of the oxygen potential profile across
solid-state electrochemical cells J.
Appl. Eectrochemistry 33
(2003) 571-576. |
91.
|
Sirdeshmukh, D.B., Subhadra, K.G. and Bauri, R. Measurement
of ultrahardness and estimates of surface hardness
of some crystals with different structures and bonding Proc.
AP Akademi of Sciences 3 (2003) 203-210. |
92.
|
Sivakesavam, O. and Prasad, Y.V.R.K. Hot deformation behaviour
of as-cast Mg-2Zn-1Mn alloy in compression : a study with processing map Mater.
Sci. Engg. A362
(2003) 118-124. |
93.
|
Sivaprasad, P.V., Venugopal, S., Sridhar Venugopal,
Maduraimuthu, V., Vasudevan,
M., Mannan, S.L., Prasad, Y.V.R.K. and Chaturvedi, R.C. Validation of processing maps for a
15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and
rolling tests J.
Mater. Process Tech. 132 (2003) 262-268. |
94.
|
Subramanian,
S., Santhiya, D. and Natarajan,
K.A. Surface modification studies on sulphide minerals using bioreagents Int.
J. Miner. Process. 72 (2003) 175-188 |
95.
|
Sudhir, B. and Chokshi, A.H. Creep
characterization of alumina particulate reinforced alumino-silicate
glass J. Non-Crystalline Solids
316 (2003) 167-173. |
96.
|
Sundar, R.S., Sastry, D.H. and Prasad,
Y.V.R.K. Hot
workability of as-cast Fe3Al-2.5% Cr intermetallic
alloy Mater.
Sci. Engg. A347 (2003) 86-92. |
97.
|
Surappa, M.K. Aluminium matrix composites : Challenges and
opportunities Sadhana 28 (2003) 319-344. |
98.
|
Surappa, M.K. Metal matrix composites Materials
Research : Current Scenario and Future Projections, (Eds.)
R. Chidambaram and S. Banerjee, Allied Publishers Pvt.
Ltd., New Delhi, (2003) pp. 301-318. |
99.
|
Surappa, M.K. Automotive applications of aluminium
matrix composites Proc.
International Conference on Advances in Materials & Processes for
Industrial Applications and Materials Show, Pune,
September 25-27, (2003)
pp. 3-6. |
100.
|
Surappa, M.K. Modeling studies in particle reinforced metal
matrix composite Proc.
Workshop on ‘Modeling of Nano and Smart Materials,
UGC-CAS in Fluid Mechanics, |
101.
|
Vijayalakshmi, S.P. and Raichur, A.M. The
utility of Bacillus subtilis as a bioflocculant for fine coal Colloids
and Surfaces B : Biointerfaces
29 (2003) 265-275. |
102. |
Vijayalakshmi, S.P. and Raichur, A.M. Enhancement
of filtration kinetics of fine coal using microorganisms Proceedings of the XXII
International Mineral Processing |
103. |
Vijayalakshmi, S.P. and Raichur, A.M. Enhanced
settling of fine coal using microorganisms Proceedings of the
International Conference of Mineral Processing Technology-2003, (Eds.) K.S. Raju, S.K. Ghosh, A. Majumdar, A.K. Nandi, A.T. Sutone and A.S. Bhoge, Allied
Publishers Pvt. Ltd, |
104.
|
Yu,
F., Dwarakadasa, E.S. and Ranganathan,
S. Microstructure
and mechanical properties of spray-formed Al-Si-Pb
alloys J.
Mater.Process. Tech. 137 (2003) 164-167. |
105.
|
BOOKS Supercooled liquids, glass transition and bulk metallic glasses Symposium
Proceedings Vol. 754, Eds.
T. Egami, A.L. Greer, A. Inoue, and S. Ranganathan, Materials
Research Society, |
106.
|
Proceedings of the
International Conference on “Aluminium (INCAL
2003)” Eds.
S. Subramanian and D.H. Sastry The
Aluminium Association of |
107.
|
Proceedings of the Altech Indo-Norwegian Seminar on “Aluminium
Products - Design and Manufacture” Eds.
D.H. Sastry and S. Storen,
(2003) 147 pages. |