Publications in the Year -2000

---

1. Anuradha, T.V. and Ranganathan, S.
   Mesoporous Materials
   Proc. Int. Symposium on Amorphous and Nanocrystaline Materials (Satellite Meeting of Nano2000), Ed. A. Inoue, Japan Society for the Promotion of Science (2000).
   
   
2. Balaji, S., Abinandanan, T.A., Ayappa, K.G. and Chandrasekhar, N.
   Molecular dynamics study of vacancy diffusion in a forced Lennard-Jones system
   Philos. Mag. A. 80 (2000) 301-310.
   
   
3. Bhat, B.V.R., Mahajan, Y.R. and Prasad,Y.V.R.K.
   Effect of volume fraction of SiCp reinforcement on the processing maps for 2124
   Al metal matrix composites
   Metall. Mater. Trans. 31A (2000) 629-639.
   
   
4. Changdar, S. Ghosh, M. and Dwarakadasa, E.S.
   Study of dry sliding wear in spray formed (-Si alloys
   Proc. Int. Symposium on Materials Ageing and Life Management, Kalpakkam, (Eds.) Baldev Raj, K. Bhanu Sanakara Rao, T. Jayakumar and R.K. Dayal
   Allied Publishers Limited, Chennai (2000)
   
   
5. Chattopadhyay, K.
   Trends and opportunities in basic research in microgravity materials
   processing
   Curr. Sci. 79 (2000) 328-334.
   
   
6. Chinnasamy, C.N., Narayansamy, A., Ponpandian, N., Chattopadhyay, K.,
   Guerault, K. and Greneche, J.M.
   Magnetic structure of nanostructured ferrimagnetic zinc ferrite
   J. Phys.: Condens. Matter 12 (2000) 7795-7805.
   
   
7. Chokshi, A.H.
   Superplastic ceramics
   Trans. Indian Inst. Metals 53 (2000) 129-134.
   
   
8. Chokshi, A.H.
   The role of diffusion creep in the superplastic deformation of 3 mol% yttria stabilized zirconia
   Scripta Mater. 42 (2000) 241-248.
   
   
9. Divakar, M., Hajra, J.P., Jakobsson, A. and Seetharaman, S.
   Thermodynamics of surfaces and adsorption in the Fe-C-S-O system
   Metall. Mater. Trans. 31B (2000) 267-276.
   
   
10. Divakar, M., Gornerup, M. and Lahiri, A.K.
    Simultaneous reduction of oxides and dissolution of Al2O3 from stainless steelmaking slag,
    Proc. Sixth Int. Conf. Molten Slags, Fluxes and Salts, Stockholm, June 2000, (eds.) S.Seetharaman and Du Sichen, paper no.76, pp. 1-27.
    
    
11. Dwarakadasa, E.S.
    Studies on the wear behaviour of thin films and coatings
    Proc. Int.Workshop on Surface Engineering and Coatings, NAL, Bangalore, (2000) pp. 131.
    
    
12. Gibbons, P.C., Kelton, K.F., Ranganathan, S. and Daulton, T.L.
    Kikuchi bands in quasicrystals and their approximants
    Phil. Mag. A 80 (2000) 843-852.
    
    
13. Gururajan, M.P. and Abinandanan, T.A.
    Mean field theory of point defects in (- NiAl alloys
    Intermetallics 8 (2000) 759-767.
    
    
14. Haq, A., Haq, A.J., Banerjee, S. and Dwarakadasa, E.S.
    Fatigue crack growth retardation involving crack bridging by shear ligaments
    Proc. Int. Symposium on Materials Ageing and Life Management, October 3-6, 2000, Kalpakkam, (eds.) Baldev Raj, K. Bhanu Sankara Rao, T. Jayakumar and R.K. Dayal, Allied Publishers Limited, Chennai (2000).
    
    
15. Hoppe, K., Subramanian, S. and Lahiri, A.K.
    Recycling of lead-acid batteries and slag utilization: An Indian case study
    Proc. Sixth International Conference on Molten Slags, Fluxes and Slats, (Eds.) S. Seetharaman and Du Sichen, Sweden and Finland, June (2000) paper 178, 1-5.
    
    
16. Iwai, Y., Honda, T., Miyajima, T., Iwasaki, Y., Surappa, M.K. and Xu, J.F.
    Dry sliding wear behavior of Al2O3 fiber reinforced aluminum composites
    Composites Science and Technology 60 (2000) 1781-1789.
    
    
17. Jacob, K.T. Uda, T., Okabe, T.H. and Waseda, Y.
    The standard enthalpy and entropy of formation of Rh2O3 - A third-law optimization
    High Temp. Mater. Process. 19 (2000) 11-16.
    
    
18. Jacob, K.T. and Waseda, Y.
    Solid state cells with buffer electrodes for measurement of chemical potentials and Gibbs energies of formation : system Ca-Rh-O
    J. Solid State Chem. 150 (2000) 213-220.
    
    
19. Jacob, K.T. and Abraham, K.P.
    Phase relations in the system Sr-Cr-O and thermodynamic properties of SrCrO4 and Sr3Cr2O8
    J. Phase Equilibria 21 (2000) 46-53.
    
    
20. Jacob, K.T., Okabe, T.H., Uda, T. and Waseda, Y.
    Solid-state cells with buffer electrodes for accurate thermodynamic measurements : system Nd-Ir-O
    Electrochim. Acta 45 (2000) 1963-1971.
    
    
21. Jacob, K.T., Hoque, S.M. and Waseda, Y.
    Solute-solute and solute-solvent interactions in transition metal alloys : Pt-Ti system
    Mater. Sci. Tech. 16 (2000) 364-371.
    
    
22. Jacob, K.T., Mishra, S. and Waseda, Y.
    Refinement of thermodynamic properties of ReO2
    Thermochim. Acta 348 (2000) 61-68
    
    
23. Jacob, K.T., Jayadevan, K.P., Mallya, R.M. and Waseda, Y.
    Nanocrystalline MgAl2O4 : measurement of thermodynamic properties using a solid state cell
    Adv. Mater. 12 (2000) 440-444.
    
    
24. Jacob, K.T. and Mishra, S.
    Refinement of the thermodynamic properties of ruthenium dioxide and osmium dioxide
    J. Am. Ceram. Soc. 83 (2000) 1745-1752.
    
    
25. Jacob, K.T. and Jayadevan, K.P.
    System Sr-Pb-O : phase equilibria and thermodynamics using solid state cells with buffer electrodes
    Chem. Mater. 12 (2000) 1779-1786.
    
    
26. Jacob, K.T., Hoque, M.S. and Waseda, Y.
    Synergistic use of thermogravimetric and electrochemical techniques for thermodynamic study of TiOx (1.67 ( x ( 2.0) at 1573 K
    Mater. Trans. JIM 41 (2000) 681-689.
    
    
27. Jacob, K.T., Uda, T. Okabe, T.H. and Waseda, Y.
    Phase equilibria and thermodynamics of the system (silver+rhodium+oxygen)
    J. Chem. Thermodyn. 32 (2000) 1399-1408.
    
    
28. Jacob, K.T., Chandran, A. and Mallya, R.M.
    An assessment of the reduction potential of hydrogen plasma
    Z. Metallkd. 91 (2000) 401-405.
    
29. 
    
30. Jacob, K.T. and Jayadevan, K.P.
    Tie lines and mixing properties of solid solutions in the system CaO-SrO-PbO-O at 1100 K
    J. Phase Equilibria 21 (2000) 350-356.
    
    
31. Jacob, K.T. and Behera, C.K.
    Equilibria involving the reciprocal spinel solid solution (MgxFe1-x)
    (Al yCr1-y)2O4 : Modeling and experiment
    Metall. Mater. Trans.B 31 (2000) 1247-1259.
    
    
32. Jacob, K.T. and Behera, C.K.
    Spinel-corundum equilibria and activities in the system MgO-Al2O3- Cr2O3 at 1473 K
    Metall. Mater. Trans. B 31 (2000) 1323-1332.
    
    
33. Jacob, K.T., Priya, S. and Waseda, Y.
    A thermodynamic study of liquid Cu-Cr alloys and metastable liquid immiscbility
    Z. Metallkd. 91 (2000) 594-600.
    
    
34. Jacob, K.T., Priya, S. and Waseda, Y.
    Measurement of the activity of boron in liquid copper using a four-phase equilibrium technique
    Metall. Mater. Trans. 31A (2000) 2673-2678.
    
    
35. Jacob, K.T., Dasgupta, N., Nafe, H. and Aldinger, F.
    Measurement of Gibbs energy of formation of LaGaO3 using a composition-graded solid electrolyte
    J. Mater. Res. 15 (2000) 2836-2843.
    
    
36. Jayadevan, K.P., Kumar, N.V., Mallya, R.M. and Jacob, K.T.
    Use of metastable, dissociated and charged gas species in synthesis : a low pressure analogue of the high pressure technique
    J. Mater. Sci. 35 (2000) 2429-2434.
    
    
37. Jayadevan, K.P. and Jacob, K.T.
    Trends in the stability of ternary oxides : systems M-Pb-O (M = Ca, Sr, Ba)
    High Temp. Mater. Process. 19 (2000) 399-407.
    
    
38. Jayadevan, K.P. and Jacob, K.T.
    Stability of Cu2Ln2O5 compounds - comparison, assessment and systematics
    High Temp. Mater. Process. 19 (2000) 389-397.
    
    
39. Jayaram, V. and Brandon, D.
    Directed melt oxidation
    Handbook of Ceramic Hard Materials (ed) R. Riedel, Wiley, (2000).
    
    
40. Jog, C.S., Sankarasubramanian, R. and Abinandanan, T.A.
    Symmetry-breaking transitions in equilibrium shapes of coherent precipitates
    J. Mech Phys Solids 48 (2000) 2363.
    
    
41. Kang, S., Saito, M., Jacob, K.T. and Waseda, Y.
    Anomalous X-ray scattering study of local structures in the superionic conducting glass (AgBr)0.4 (Ag2O)0.3 (GeO2)0.3
    Sci. Tech. Adv. Mater. 1 (2000) 37-42.
    
    
42. Kang, S., Saito, M., Jacob, K.T. and Waseda, Y.
    Transport properties of superionic conducting glasses (AgX)0.4 (Ag2O)0.3(GeO2)0.3 (X = I, Br, CI)
    Mater. Trans. JIM 41 (2000) 1670-1674
    
    
43. Karthikeyan, C.S., Murthy, C.R.L., Sankaran, S. and Kishore
    Influence of chopped strand fibres on the flexural behaviour of a syntactic foam
    core system
    Polym. Int. 49 (2000) 158-162.
    
    
44. Karthikeyan, C.S., Kishore and Sankaran, S.
    Comparison of compressive properties of fiber-free and fiber-bearing syntactic foams
    J. Reinf. Plast. Compos. 19 (2000) 732-742.
    
    
45. Kishen, A., Ramamurty, U. and Asundi, A.
    Experimental Studies on the Nature of Property Gradients in Human Tooth Dentine
    J. Biomed. Mater. Res. 51 (2000) 650-659.
    
    
46. Kishore, Sampathkumaran, P., Seetharamu, S., Vynatheya, S., Murali, A. and Kumar, R.K.
    SEM observations on the effects of velocity and load on the sliding wear characteristics of glass fabric-epoxy composites
    Wear 237 (2000) 20-27.
    
    
47. Kishore, Khan, B. and Viswanath, B.
    On the utility of instrumented impact set up to characterise the response of discontinuous buffer strips in carbon-epoxy system
    Adv. Comp. Lett. 9 (2000) 329-333.
    
    
48. Kottada, R.S. and Chokshi, A.H.
    The high temperature tensile and compressive deformation characteristics of magnesia doped alumina
    Acta Mater. 48 (2000) 3905-3915.
    
    
49. Kottada, R.S. and Chokshi, A.H.
    Is there diffusion creep in alumina?
    Key Engg. Mater. 171-174 (2000) 779-786
    
    
50. Kumar, S.
    Cause of inverse behaviour of onset strain
    International Symposium on Materials Ageing and Life Management (ISOMALM), (eds.) Baldev Raj, K. Bhanu Sankara Rao, T. Jayakumar and R. K. Dayal, October 3-6, 2000, Kalpakkam, India, Allied Publishers Limited, pp. 317-320.
    
    
51. Lahiri, A.K.
    Pollutant emission from alternative ironmaking processes
    Proc. Int. Conf. Environmental Management in Metallurgical Industries, Varanasi, December 2000, (ed.) R.C.Gupta, pp. 23-30.
    
    
52. Lord, E.A., Ramakrishnan, K. and Ranganathan, S.
    An algorithm for generating quasiperiodic patterns and their approximants
    Bull. Mater. Sci. 23 (2000) 119-123.
    
    
53. Lord, E.A., Ranganathan, S. and Kulkarni, U.D.
    Tilings, coverings, clusters and quasicrystals
    Curr. Sci. 78 (2000) 64-72.
    
    
54. Manivel Raja, M., Chattopadhyay, K., Majumder, B. and
    Narayanasamy, A.
    Structure and soft magnetic properties of FINEMET alloys
    J. Alloys Compds. 297 (2000) 199-205.
    
    
55. Mazumder, M. and Chattopadhyay, K.
    Aligned monotectic growth in unidirectionally solidified Zn-Bi alloys
    Metall. Mater. Trans. 31A (2000) 1833-1842.
    
    
56. Medeiros, S.C., Prasad, Y.V.R.K., Frazier, W.G. and Srinivasan, R.
    Microstructural Modeling of Metadynamic Recrystallization in hot working of IN 718 superalloy
    Mater. Sci. Engg. A293 (2000) 198-207.
    
    
57. Medeiros, S.C., Frazier, W.G. and Prasad, Y.V.R.K.
    Hot deformation mechanisms in a P/M nickel base superalloy IN625
    Metall. Mater. Trans. A31 (2000) 2317-2325.
    
    
58. Nagendra, N. and Jayaram, V.
    Fracture and R-curves in Al2O3/Al-AlN composites
    J. Mater. Res. 15 (2000) 1131-1144.
    
    
59. Nagendra, N. and Jayaram, V.
    Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3/Al-AlN composites
    J. Mater. Res. 15 (2000) 1145-1153.
    
    
60. Nagendra, N., Ramamurty, U., Goh, T.T. and Li, Y.
    Effect of crystallinity on the impact toughness of a La-based bulk metallic glass
    Acta Mater. 48 (2000) 2603-2615.
    
    
61. Natarajan, K.A. and Namita, D.
    Microbially induced processing of mineral fines
    Processing of Fines (Eds.): P. Bhattacharyya, R. Singh and N.G. Goswami, NML Jamshedpur , vol. 2, (2000) pp. 317-337.
    
    
62. Niranjanappa, A.C., Dwarakadasa, E.S. and Skaria, S.
    Use of ultrasonics for evaluation of composites - A study related to sandwich structures
    Proc. Third International Conference on "Advances in Composites" ADCOMP-2000, Bangalore (2000).
    
    
63. Okabe, T.H., Horiuchi, A., Jacob, K.T. and Waseda, Y.
    Physicochemical studies of lithium nitride in molten LiCl-KCl
    Mater. Trans., JIM 41 (2000) 822-830.
    
    
64. Phanikumar, G., Dutta, P. and Chattopadhyay, K.
    Supercomputing applications in materials engineering
    Curr. Sci. 78 (2000) 847-849.
    
    
65. Phanikumar, G., Chattopadhyay, K. and Dutta, P.
    Numerical simulation of laser welding of dissimilar metals
    Mathematical Modeling of Weld Phenomena V, Institute of Materials, London,
    2000, pp. 885-896.
    
    
66. Pink, E., Kumar, S. and Tian, B.
    Serrated flow of aluminium alloys influenced by precipitates
    Mater. Sci. Engg. A 280 (2000) 17-24.
    
    
67. Priya, S. and Jacob, K.T.
    Activities and immiscibility in the system Cu-Rh
    J. Phase Equilibria 21 (2000) 342-349.
    
    `
68. Paul, A. and Ramamurty, U.
    Strain rate sensitivity in a closed-cell Al foam
    Mater. Sci. Engg. A281 (2000) 1-7.
    
    
69. Peralta, P., Ramamurty, U., Suresh, S., Campbell, G.H., King, W.E. and Mitchell, T.E.
    Crystallographic effects of fatigue fracture of copper-sapphire interfaces
    Phil. Mag. A. 80 (2000) 2109-2129.
    
    
70. Prasad, Y.V.R.K., Sasidhara, S. and Sikka, V.K.
    Characterization of mechanisms of hot deformation of as-cast nickel aluminide
    alloy
    Intermetallics 8/9 (2000) 987-995.
    
    
71. Prasad, Y.V.R.K., Sastry, D.H. and Deevi, S.C.
    Processing maps for hot working of a P/M iron aluminide alloy
    Intermetallics 8/9 (2000) 1067-1074.
    
    
72. Prasad, Y.V.R.K., Seshacharyulu, T., Medeiros, S.C., Frazier, W.G. and Malas, J.C.
    Hot deformation mechanisms in Ti-6Al-4V with a transformed ( preform microstructure: Commercial Vs. ELI grade
    Mater. Sci. Tech. 16 (2000) 1029-1036.
    
    
73. Prasad, Y.V.R.K., Seshacharyulu, T., Medeiros, S.C. and Frazier, W.G.
    Microstructural modeling and process control during hot working of commercial Ti-6Al-4V: Response of lamellar vs. equiaxed performs
    Mater. Manuf. 15 (2000) 581-604.
    
    
74. Prasad, Y.V.R.K.
    Dynamical systems approach for microstructural control in hot working processes
    Proc. Int. Symposium on Materials Ageing and Life Management, Oct. 3-6, 2000, IGCAR, Kalpakkam, (Eds.) Baldev Raj, K.Bhanu Sankara Rao, T.Jayakumar, and R.K.Dayal, Allied Publishers Ltd., Chennai, India, 2000, pp.597-604.
    
    
75. Prasad, Y.V.R.K., Seshacharyulu, T., Medeiros, S.C., Frazier, W.G., Morgan, J.T. and Malas, J.C.
    Effect of prior ( grain size on the hot deformation behavior of Ti-6Al-4V: Coarse vs. Coarser
    J. Mater. Engg. Perform. 9 (2000) 153-160.
    
    
76. Prasad, Y.V.R.K., Seshacharyulu, T., Medeiros, S.C. and Frazier, W.G.
    Effect of perform microstructure on the hot working mechanisms in ELI grade Ti-6Al-4V: Transformed ( vs. equiaxed (((()
    Mater. Sci. Tech. 16 (2000) 511-516.
    
    
77. Prasad, Y.V.R.K., Seshacharyulu, T., Medeiros, S.C., Frazier, W.G., Morgan, J.T. and Malas, J.C.
    Titanium alloy processing
    Adv. Mater. Process. 157 (2000) 85-89.
    
    
78. Raichur, A.M., Wang, X.H. and Parekh, B.K.
    Quantifying pyrite surface oxidation kinetics by contact angle measurements
    Colloids Surfaces A: Physicochemical and Engineering Aspects 167 (2000) 245-251.
    
    
79. Raichur, A.M., Wang, X.H. and Parekh, B.K.
    Comparative studies of the surface acid-base properties of pyrites from coal and ore sources
    Proceedings of the XXI Mineral Processing Congress, Rome, Vol. B,
    July 2000. pp. 171-177.
    
    
80. Raja, M.M., Chattopadhyay, K., Majumdar, B. and Narayanasamy, A.
    Structure and soft magnetic properties of finemet alloys
    J. Alloys Compds. 297 (2000) 199-205.
    
    
81. Ramamurty, U., McNulty, J.C. and Steen, M.
    Fatigue in ceramic matrix composites
    Chapter in Volume 4: Carbon/Carbon, Cement and Ceramic-Matrix
    Composites (Volume Editor: R. Warren) for the Comprehensive Composite
    Materials (Editors-in-Chief: A. Kelly and C. Zweben), Elsevier Science Ltd.,
    2000, pp. 163-219.
    
    
82. Ramamurty, U.
    Fatigue in clad Ti-matrix composites
    Proc.International Symposium on Materials Ageing and Life Management,
    (Eds.) B. Raj, K. B. S. Rao, T. Jayakumar, and R. K. Dayal), Allied
    Publishers Ltd., Chennai, India, 2000, pp. 735-741.
    
    
83. Ranganathan, S., Ramakrishnan, K., Kulkarni, U. D. and Mukhopadhyay, N.K.
    On the relationship between cubic crystalline coincidence site lattices and quasiperiodic superlatttices
    Mater. Sci. Engg. A294-296 (2000) 429-433.
    
    
84. Ranganathan, S., Sastry, D.H., Khincha, H.P., Parbat, R.N., Storen, S., Wathne, E., Larsen, P.K. and Marstrander, R.
    Linkage among academia, industry & market: ALTECH programme as a role model
    Proc. Dr Dara P. Antia Memorial Seminar on " Metals and Materials in the Market Place", Indian Institute of Metals, Calcutta, (2000).
    
    
85. Rath, R.K., Subramanian, S. and Pradeep, T.
    Surface chemical studies on pyrite in the presence of polysaccharide-based flotation depressants
    J. Colloid Interface Sci. 229 (2000) 82-91.
    
    
86. Rath, R.K. and Subramanian, S.
    Investigations into the surface chemistry of some sulphide minerals using a natural polysaccharide
    Proceedings of the XXI International Mineral Processing Congress, Rome, Italy, P. Massacci, (Ed.), Elsevier, Volume B, (2000) B8b 144 -151.
    
    
87. Ravikumar, N.V. and Dwarakadasa, E.S.
    Effect of matrix strength on the mechanical properties of Al-Zn-Mg/SiCp composites
    Composites : Part A31 (2000) 1139-1145.
    
    
88. Santhiya, D., Subramanian, S., Natarajan, K.A. and Malghan, S.G.
    Surface chemical studies on alumina suspensions using ammonium poly(methacrylate)
    Colloids and Surfaces A: Physicochem. Engg. Aspects 164 (2000) 143-154.
    
    
89. Santhiya, D., Subramanian, S. and Natarajan, K.A.
    Surface chemical studies on galena and sphalerite in the presence of Thiobacillus thiooxidans with reference to mineral beneficiation
    Minerals Engineering 13 (2000) 747-763.
    
    
90. Saravanan, R.A. and Surappa, M.K.
    Fabrication and characterisation of pure magnesium-30 vol.% SiCp particle composite
    Mater. Sci. Engg. A276 (2000) 108-116.
    
    
91. Seshacharyulu, T., Medeiros, S.C., Frazier, W.G. and Prasad, Y.V.R.K.
    Mechanism of hot working in extra low interstitial grade Ti-6Al-4V with equiaxed (((() microstructure
    Z. Metallkd. 91 (2000) 775-780.
    
    
92. Seshacharyulu, T., Medeiros, S.C., Morgan, J.T., Malas, J.C., Frazier, W.G. and Prasad, Y.V.R.K.
    Hot deformation and microstructural damage mechanisms in ELI grade
    Ti-6Al-4V
    Mater. Sci. Engg. A 279 (2000) 289-299.
    
    
93. Seshacharyulu, T., Medeiros, S.C., Frazier, W.G. and. Prasad, Y.V.R.K.
    Hot working of Commercial Ti-6Al-4V with an equiaxed (-( microstructure:
    Materials modeling considerations
    Mater. Sci. Engg. A284 (2000) 184-194.
    
    
94. Shabadi, R., Ambat, R., Kumar, S., Dwarakadasa, E.S., Bhat, K.L. and Gopalakrishnan, V.
    Microstructure and corrosion behaviour of trace element modified AZ91C magnesium alloy
    Proc. Int. Conference on Process and Manufacturing of Advanced Metals, Thermec 2000, December 4-8, 2000, Las Vegas, NV, USA.
    
    
95. Sharma, P.K., Hanumantha Rao, K., Natarajan, K.A. and Forssberg, K.S.E.
    Bioprocessing of Sulfide minerals in the presence of heterotrophic and chemolithotrophic bacteria
    Proc. XXI International Mineral Processing Congress, Aug-2000, Elsevier, Amsterdam (2000) pp. B8a-94-103.
    
    
96. Somasundaran, P., Namita, D. and Natarajan, K.A.
    Utility of bioreagents in mineral processing
    Minerals Metall. Process. 17 (2000) 112-115.
    
    
97. Srivastava, D., Mukhopadhyay, P., Banerjee, S. and Ranganathan, S.
    Morphology and substructure of Lath Martensites in dilute Zr-Nb alloys
    Mater. Sci. Engg. A 288 (2000) 101-110.
    
    
98. Sudhakar, K.V. and Dwarakadasa, E.S.
    A study on fatigue crack growth in dual phase martensitic steel in air environment
    Bull. Mater. Sci. 23 (2000) 193-199.
    
    
99. Sudhakar, K.V., Sampathkumaran, P., Dwarakadasa, E.S.
    Dry sliding wear in high density Fe-2% Ni based P/M alloys
    Wear 242 (2000) 207-212.
    
    
100. Surappa, M.K.
     Discontinuously reinforced aluminium matrix composites: current status and prospects
     Proc International Symposium on Materials Ageing and Life Management (ISOMALM 2000), Kalpakkam, India, (Eds.) Baldev Raj, K.Bhanu Sankara Rao, T.Jayakumar, and R.K.Dayal, Allied Publishers Ltd., Chennai, India, vol. I 2000, pp. 713-719.
     
     
101. Uda, T., Okabe, T.H., Waseda, Y. and Jacob, K.T.
     Contactless electrochemical reduction of titanium (II) chloride by aluminium
     Metall. Mater. Trans. B 31B (2000) 713-721.
     
     
102. Uda, T., Jacob, K.T. and Hirasawa, M.
     Technique for enhanced rare earth separation
     Science 289 (2000) 2326-2329.
     
     
103. Vaidyanathan, R., Dunad, D.C. and Ramamurty, U.
     Fatigue crack-growth in shape memory NiTi and NiTi-TiC composites
     Mater. Sci. Engg. A289 (2000) 208-216.
     
     
104. Wang, R.M., Song, Y.G., Qu, S.Y. and Surappa, M.K.
     Microstructure and interface structure of SiCp-reinforced Mg(AZ91) metal-matrix composite
     Proc. Second Israeli Int. Conf. on Magnesium Science & Technology, (Eds.) E. Aghion and D. Eliezer, 2000, pp. 229-234.
     
     
105. Books
     
     Raj, Baldev, Shyamsunder, M.T. and Ranganathan, S. ( editors)
     NDE science and technology for quality improvement
     Indian National Academy of Engineering, New Delhi, 2000.
     
     

---