Publications in the Year -1997
- Abinandanan, T.A.
Continuum and atomistic modelling of precipitation in stressed solids
Bull. of Mater. Sci. 20 (1997) 901.
- Ananth, D., Gothe, N.N. and Subramanian, S.
Studies on beneficiation of limestone from Salem
J. Mines, Metals and Fuels XLV (1997) 216-219.
- Ananthasivan, K., Kaliappan, I., Anthonysamy, A., Vasudeva Rao,
P.R., Mathews, C.K. and Jacob, K.T.
Stabilities of ternary carbides UWC1.75 and UWC2
High Temp. Mater. Process. 16 (1997) 255-260.
- Bag, A., Menon M, Ray, K.K. and Dwarakadasa, E.S.
Tensile behaviour of intercritically treated high martensite dual-phase steel
in Advances in Fracture Research
Proc. of the Ninth Intl. Conf. on "Fracture", Sydney, Vol.1, Failure
Analysis, Remaining Life Assessment, Life Extension and Repair, (1997)
611.
- Bag, A., Ray K.K., Aprameyan,K., Dwarakadasa, E.S. and Sudhakar,
K.V.
Fracture and fatigue crack growth behaviour of high martensite dual-phase
steel, in Advances in Fracture Research
Proc. of the Ninth Intl. Conf. on "Fracture", Sydney, Vol.1, Failure
Analysis, Remaining Life Assessment, Life extension and Repair, (1997)
1549.
- Banerjee, S., Roychaudhuri, A.K., Goswami, R. and Chattopadhyay,
K.
Quantum correction in low temperature resistivity and magnetoresistance
of Al-Cu-Cr quasicrystals
J. Phys. : Cond. Mater. 9 (1997) 6643.
- Bhatia, T., Chattopadhyay, K. and Jayaram, V.
Effect of liquid precursor pyrolysis on phase selection in the MgO-
MgAl2O4 system
Mat. Sci. and Engg. A226-228 (1997) 930-937.
- Bhattacharya, P. and Chattopadhyay, K.
Synthesis and phase transformation study of nanodispersed Pb in SiO2 and
Al2O3 matrices
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi ,(1997) 817-824.
- Chattopadhyay, K..
Synthesis and properties of nanodispersed granular materials
Mat. Sci. and Engg. A226-228 (1997) 1012-1018.
- Chattopadhyay, K., Ravishankar, N. and Goswami, R.
Shapes of quasicrystals,
Prog. Crystal Growth and Characterisation 34 (1997) 237-249.
- Chattopadhyay, K. and Goswami, R.
Melting and superheating of metals and alloys
Prog. Mater. Sci. 42 (1997) 287-300.
- Chitra, K., Seshacharyulu, T., Sashidhara, S. and Prasad, Y.V.R.K.
Processing map for hot working of cupronickel
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Chitralekha, J., Gopal ,E.S.R. and Chattopadhyay, K.
Studies on elemental tellurium under high pressure
J. Mater. Sci. 32 (1997) 2177-2180.
- Chokshi, A.H.
The influence of grain size on cavitation in superplasticity
Mater. Sci. Forum (Eds.) T. Sakuma, T. Aizawa and K. Higashi
Special Issue 233-234 (1997) 89-108.
- Chokshi, A.H.
A comparative examination of superplastic flow and fracture in metals and
ceramics,
Mater. Sci. Engg. A234-236 (1997) 986-900.
- Das, A., Modak, J.M. and Natarajan, K.A.
Studies on multi-metal ion tolerance of Thiobacillus ferrooxidans
Minerals Engineering 10 (1997) 743-749.
- Das, K.K., Pradip and Natarajan, K.A.
The effect of constituent metal ions on the electrokinetics of chalcopyrite
J. Colloid Interface Sci. 196 (1997) 1-11.
- Dheepa, S. and Chattopadhyay, K.
Nanocomposite microstructure in a melt spun Al-Cu-Zr alloy
Proc. of Intl. Conf. on "Superplasticity in Advanced Materials, ICSAM-
97", Materials Science Forum, Special Issue (Eds.) A.H. Chokshi,
Bangalore, (1997), pp. 251-256.
- Deshpande, R.J., Natarajan, K.A., Kittur, S.G. and Rao, T.R.R.
Reverse flotation of silica from Kudremukh iron ore : Part I Selection of
cationic reagents
Trans. Indian Inst.Metals 50 (1997) 391-396.
- Deshpande, R.J., Natarajan, K.A., Kittur, S.G. and Rao, T.R.R.
Reverse flotation of silica from Kudremukh iron ore : Part 2. Optimization
of flotation processes
Trans. Indian Inst.Metals 50 (1997) 397-402.
- Divakar, M. and Hajra, J.P.
The effect of temperature on the surface tension and adsorption functions
of the Fe-S-O melts - an analysis based on interaction parameters
Steel Research 68 (1997) 417-423.
- Divakar, R., Sundararaman, D. and Ranganathan, S.
Studies of interfaces in Al65 Cu20 Fe15
Bull. Mater. Sci. 20 (1997) 519-523.
- Dong, C., Wang, D.H., Wang, Y.M., Ge, F., He, F.Z., Zhang, Q.H.,
Chattopadhyay, K. and Ranganathan, S.
The structural relations between quasicrystals and B2-Based approximants
Proc. 6th Int. Conf. on Quasicrystals, Tokyo, (1997) 223-226.
- Dutta, B., Saravanan, R.A. and Surappa, M.K.
Synthesis of discontinuously reinforced metal matrix composites,
(DRMMCs) and their property evaluation
Proc. of the 3rd Japan-India Joint Seminar on "Manufacturing Science of
Advanced Composites", Tokyo, (1997) 13-20.
- Dutta, B. and Surappa, M.K.
Studies on age-hardening characteristics of ceramic particle/matrix
interfaces in Al-Cu-SiCp composites using ultra low-load-dynamic
microhardness measurements
J. Mater. Res. 12 (1997) 2773-2778.
- Gandhi, A.S., Jayaram, V. and Chokshi, A.H.
Low temperature consolidation of metastable phases in alumina-
zirconia
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Gandhi, A.S., Jayaram, V. and Chokshi, A.H.
Phase evolution and densification of spray pyrolysed ZrO2-Al2O3
powders
Proc. of Intl. Conf. on "Superplasticity in Advanced Materials, ICSAM-
97", Materials Science Forum, Special Issue (Ed.) A.H. Chokshi,
Bangalore, (1997) pp. 251-256.
- Gayathri, N., Goswami, R. and Banerjee, S.
Electrical resistivity and point contact studies on Al-Pd-Mn icosahedral
quasicrystals
Bull. Mater. Sci. 20 (1997) 531-534.
- Gupta, D., Chakrovarty, S. and Lahiri, A.K.
Asymmetry and oscillation of the fluid flow pattern in continuous casting
mould : A water model study
ISIJ Int. 37 (1997) 564.
- Gupta, M., Surappa. M.K. and Qin, S.
Effect of interfacial characteristics on the failure-mechanism mode of a
SiC reinforced Al based metal-matrix composite,
J. Mater. Process. Technol. 67 (1997) 94-99.
- Hajra, J.P., Jayaganthan, R. and Divakar, M.
Representation of thermodynamic properties of quaternary systems using
interaction parameters
Steel Research 68 (1997) 375-382.
- Iyengar, G.N.K., Balasubramanya, R. and Jacob, K.T.
A phenomenological treatment of cation distribution in spinels: System
(Ni1xAlx)t[NixAl2x]0O4
High Temperature Materials and Processes 16 (1997) 39-48.
- Jacob, K.T.
Discussion of use of solid electrolyte galvanic cells to determine the
activity of CaO in the CaO-ZrO2 system and standard Gibbs free energies
of formation of CaZrO3 from CaO and ZrO2
Metall. Mater. Trans. 28B (1997) 723-725.
- Jacob, K.T. and Jayadevan, K.P.
Combined use of oxide and fluoride solid electrolytes for the measurement
of Gibbs energy of formation of ternary oxides: System Bi-Ca-O
Materials Trans. JIM 38 (1997) 427-436.
- Jacob, K.T. and Jayadevan, K.P.
Measurement of the Gibbs energy of formation of Ca2PbO4 using a solid
state cell with three electrodes
J.Mater.Chem. 7 (1997) 2407-2413.
- Jayaganthan, R. and Hajra, J.P.
Applicability of a dilute quaternary model in interpreting the
thermodynamic properties of the Fe-Ni-Ta-N system
Scripta Mater. 37 (1997) 1539-1544.
- Johannesson, B., Ogin, S.L. and Surappa, M.K.
Effect of reinforcement geometry of matrix stresses in aluminium matrix
composites : some preliminary results
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Kishore, and Venkataraman, S.
The role of interface in foam bearing glass epoxy composites subjected to
impact loading
Composite Interfaces 5 (1) (1997) 55.
- Krishnakumar, R., Sinha, S.K. and Lahiri, A.K.
Modelling of the cooling process on the runout table of hot strip mill - A
parallel approach
IEEE Trans. Ind. Appl. 33 (1997) 807.
- Kumar, S. and Pink, E.
Serrated flow in aluminium alloys containing lithium
Acta Mater. 45 (1997) 5295-5301.
- Kutty, T.R.G., Ganguly, C. and Sastry, D.H.
Studies on UAl3 to UAl4 transformation by high temperature dilatometry
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Kutty, T.R.G., Ganguly, C. and Sastry, D.H.
Impression creep testing of Al-22U and Al-22U-2Zr alloys
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Laha, K., Chandravathi, K.S., Bhanu Sankara Rao, K., Mannan, S.L.
and Sastry, D.H.
Creep behaviour of post-weld heat-treated 9Cr-1Mo ferritic steel base
metal and weldments
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Lord, E.A.
Triply-periodic balance surfaces
Colloids Surfaces A: Pysicochem Eng. Aspects 129-130 (1997) 279-
275.
- Majumdar,B.,Manivel Raja,M.,Narayanasamy,A.and Chattopadhyay,
K.
Structural and magnetic investigations on the metastable phases of the
mechanically alloyed Fe-Cu system
J. Alloys Compounds 248 (1997) 192.
- Mudakavi, J.R. and Narayana, B.V.
Toxic heavy metal contamination of the soil and biota: Part I-Generic and
element specific sources
Indian J. Environmental Protection 17 (1977) 752-760.
- Murali, S., Arvind, T.S., Raman, K.S. and Murthy, K.S.S.
Fatigue properties of sand cast, stircast and extruded Al-7Si-0.3Mg
alloy
with trace additions of Be and Mn
Mater. Trans., JIM 38 (1997) 28-36.
- Murali S., Ramachandra M., Murthy K.S.S. and Raman K.S.
Electropolishing of Al-7Si-0.3Mg cast alloy by using perchloric and nitric
acid electrolytes
Materials Characterization 38 (1997) 273-286.
- Murali, S., Arunkumar, Y., Chetty, P.V.J., Raman, K.S. and Murthy,
K.S.S.
The effect of preaging on the delayed aging of Al-7Si-0.3Mg
J. Metals (1997) 29.
- Murali, S., Muthukkaruppan, S., Raman, K.S. and Murthy, K.S.S.
Stir cast and extruded Al-7Si-0.3Mg alloy containing iron and beryllium
Materials Science and Technology 13 (1997) 337.
- Murali, S., Raman, K.S. and Murthy, K.S.S.
A review of rheocasting
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Murthy, K.S.N., Subramanian, S. and Dwarakadasa ,E.S.
Corrosion behaviour of 8090-T851 Al-Li alloy and aluminium in pH 2
solution containing cupric ions
Br. Corros. J. 32 (1997) 63-67.
- Nagarajan, R., Ranganathan, S., Aoki, K. and Chattopadhyay, K.
Metastable microstructures in rapidly solidified Ni rich TiNi alloys
Mater. Trans. JIM 38 (1997) 406-412.
- Nagarajan R., Manjini S., Chattopadhyay K. and Aoki K.
The effect of ternary addition of silicon on the structure and
microstructure of rapidly solidified equiatomic TiNi alloys
J. Mater. Sci. 32 (1997) 6021-6027.
- Nagarajan, R., Aoki, K. and Chattopadhyay, K.
Synthesis of nanodispersed phases during rapid solidification and
crystallisation of Ti 75-Ni25 glasses
Metall. Mater. Trans. 28A (1997) 2223.
- Namita, D. and Natarajan, K.A.
Surface modification and beneficiation of some oxide minerals using
Bacillus polymyxa
Miner. and Metallurgical Processing (1997) 32.
- Namita, D. and Natarajan, K.A.
Interaction of Bacillus polymyxa with some oxide minerals with reference
to mineral beneficiation and environmental control
Minerals Engg. 10 (1997) 1339-1354.
- Natarajan, K.A., Modak, J.M. and Anand, P.
Some microbiological aspects of bauxite mineralization and beneficiation
Minerals and Metallurgical Processing (1997) 47.
- Natarajan, K.A.
Biocorrosion in industrial applications
Proc. Int. Conf. on "Corrosion CONCORN `97", India, (1997) 107.
- Owen, D.M., Chokshi, A.H. and Nutt, S.R.
The nucleation and growth characteristics of cavities during the early
stages of tensile creep deformation in a superplastic zirconia-20 wt%
alumina composite
J. Am. Ceram. Soc. 80 (1997) 2433-2436.
- Padmapriya, P., Abinandanan, T.A. and Jayaram, V.
Coarsening of an interconnected microstructure in an Al-Al2O3 composite
Scripta Mater. 37 (1997) 1883-1888.
- Pan, J., Liu, B.W., Yang, D.M., Surappa, M.K. and Zhuo, Y.
Preparation and properties of SiC/MoSi2 composites
in Proc. of ICCM-11, Gold Coast, Australia III (1997) 653.
- Prasad, P.M. and Subramanian, S.
Problems and prospects of red mud utiisation
Trans. Indian Inst. Metals 50 (1997) 427-442.
- Ranganathan, S.
Golden Solids, (Professor N.P. Gandhi Memorial Lecture 1996)
The Banaras Metallurgist 14 & 15 (1997) 1-7.
- Rao, S., Narayana, B.V. and Subramanian, S.
Optimization studies on limestone beneficiation
Indian J. Engg. & Mat. Sci. 4 (1997) 139-144.
- Rao, T.V.L.N., Bhat, M.V., Simha, K.R.Y. and Sastry, D.H.
On the evaluation of KISCC by a single specimen technique
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Rath, R.K. and Subramanian, S.
Studies on adsorption of guar gum onto biotite mica
Minerals Engineering 10 (1997) 1405-1420.
- Rath, R.K., Subramanian, S. and Laskowski, J.S.
Adsorption of dextrin and guar gum onto talc - A comparative study
Langmuir 13 (1997) 6260-6266.
- Rath, R.K. and Subramanian, S.
Selective separation of mica from galena using dextrin
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Ravikiran, A. and Surappa, M.K.
Oscillations in coefficient of friction during dry sliding of A356 Al-30
wt% SiCp MMC against steel
Scripta Mater. 36 (1997) 95-98.
- Ravikiran A. and Surappa M.K.
Effect of sliding speed on wear behaviour of A356 Al-30 wt% of SiCp
MMC
Wear 206 (1997) 33-38.
- Ravikiran, A., Jayaram, V. and Biswas, S.K.
Sliding wear of Al2O3-SiC-Al, Si composites against steel counterface
J. Am. Ceram. Soc. 80 (1997) 219.
- Ray, A.K., Das, S.K., Maity, S., Mukhopadhyay, N.K., Tarafdar,S. and
Dwarakadasa, E.S.
Impact fatigue and indentation fracture toughness studies on an alumina-
based wear-resistant ceramic
Interceram. 46 (1997) 184-187.
- Ray, K.K., Bag, A., Bandopadhyay, P. and Dwarakadasa, E.S.
Fracture behaviour of a dual phase steel having a high percentage of
martensite in Proc. of "Thermac 97", Wollongong, Australia, 1997.
- Saki, K. and Chokshi, A.H
High temperature deformation and densification in alumina-yttria
composites in Proc. of Intl. Conf. on "Superplasticity in Advanced
Materials, ICSAM-97", Materials Science Forum, Special Issue (Ed.) A.H.
Chokshi, Bangalore, (1997), 243-245, 369-374.
- Sandeep Kumar and Jayaram, V.
Degradation of Al2O3-SiC-Al composites prepared by oxidative growth of
Al-alloys into SiC particulate
J. Mat. Sci. 32 (1997) 4719.
- Sankarasubramanian, R. and Abinandanan, T.A.
Morphology of ?2 precipitate in ? matrix in Ti-Al system
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Saravanan, R.A., Surappa, M.K. and Pramila Bai, B.N.
Erosion of A356 Al-SiCp composites due to multiple particle impact
Wear 207 (1997) 154-164.
- Saravanan, R.A. and Surappa, M.K.
Sliding wear behaviour of AMCs during cyclic loading in Proc. of 5th
Japan International SAMPE Symp., Japan, October, 1997.
- Saravanan, R.A., Seshan, S. and Surappa, M.K.
Dry sliding wear behavior of A356-10 vol. % SiCp composites during
cyclic loading
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Saravanan, R.A., Seshan, S. and Surappa, M.K.
Processing and characterization of pure magnesium matrix composites in
Proc.of 5th Japan International SAMPE Symp., Japan, October,
1997.
- Sau, A. and Lahiri, A.K.
On the asymmetry of flow in bifurcated channel
Acta Mechanica 12 (1997) 79.
- Sen, S., Abinandanan, T.A. and Aprameyan, K.
Dimensional changes during solid-solid phase transformations
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Shah, S.R. and Chokshi, A.H.
An investigation of the sinter-forging characteristics of alumina-magnesia
composites: Implications for superplasticity
Proc. of Intl. Conf. on "Superplasticity in Advanced Materials, ICSAM-
97", Materials Science Forum, Special Issue (Ed.) A.H. Chokshi,
Bangalore, (1997), pp. 381-386,
- Shashikala, H.D. and Sastry, D.H.
X-ray fourier line profile analysis in deformed single phase Ti3Al-Nb alloy
in
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Singh, A., Ranganathan, S. and Bendersky, L.A.
Quasicrystalline phases and their approximants in Al-Mn-Zn alloys
Acta Mater. 45 (1997) 5327-5336.
- Sridhar, K. and Chattopadhyay, K.
Synthesis by mechanical alloying and thermoelectric properties of
Cu2Te
J. Alloys Compounds 264 (1997) 293-298.
- Singh, A. and Ranganathan, S.
Ordering and twinning in quasicrystals
Progress Mater.Sci. 42 (1997) 393-407.
- Somasundaran, P., Yelloji Rao, M.K., Yuzhi Ren and Natarajan,
K.A.
Applications of biological processing in metallurgy,
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Srinivasan, S. and Ranganathan, S.
Wootz steel: An advanced material of the ancient world
in "Iron & Steel Heritage of India " (Ed.) S. Ranganathan, ATM 97,
Jamshedpur, (1997) 69-82.
- Srinivasan, V.S., Sandhya, R., Valsan, M., Rao, K.B.S., Mannan, S.L.
and Sastry, D.H.
Effect of dynamic strain ageing on high temperature low cycle fatigue
behaviour of AISI 316L (N) stainless steel in
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Srivastava, A.K. and Ranganathan, S.
Twinning in quasicrystals and related crystals
Prog. Crystal Growth and Charact. 34 (1997) 251-262.
- Srivastava, D., Banerjee, S. and Ranganathan, S.
Criterion for preference of mode in Zr-2.5Nb (BCC-HCP) martensitic
transformation
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Surappa, M.K.
Microstructure evolution during solidification of DRMMCs
(Discontinuously Reinforced Metal Matrix Composites): state of art,
J. Mater. Process. Technol. 63 (1997) 325-333.
- Vana Varamban, S. and Jacob, K.T.
Relation between integral and partial properties of ternary solutions along
different composition trajectories
High Temp. Mater. Process. 16 (1997) 227-242.
- Vana Varamban, S. and Jacob, K.T.
Thermodynamic constraints along isograms in ternary systems:
application to three-phase equilibria
Mater. Sci.and Engg. B49 (1997) 100-109.
- Viswanathan, N.N., Srinivasan, M.N. and Lahiri, A.K.
Mathematical modelling of divided blas cupola
Steel Research 68 (1997) 192.
- Viswanathan, N.N., Srinivasan, M.N. and Lahiri, A.K.
Steady state 3D model for cupola
Ironmaking & Steelmaking 24 (1997) 476.
- Viswanathan, N.N., Srinivasan, M.N. and Lahiri, A.K.
Scientific rationale towards cupola design
Trans. AFS (1997) 665.
- Viswanathan, N.N., Srinivasan, M.N. and Lahiri, A.K.
Post combustion in cupola for pollution control
Trans. AFS (1997) 685.
- Viswanathan, N.N. and Lahiri, A.K.
Modelling strategy for counter current shaft reactor design
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Wang, R.M., Surappa, M.K., Li, C.Z. and Yan, M.G.
Microstructure and interface structure studies of SiCp-reinforced Al
(6061) metal-matrix composites
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Yelloji Rao, M.K., Natarajan, K.A. and Somasundaran, P.
Growth and attachment of Thiobacillus ferrooxidans during sulfide
mineral leaching
Inter. J. Miner. Process. 50 (1997) 203-210.
- Yu Fuxiao, Dwarakadasa, E.S. and Ranganathan, S.
Microstructure studies of Al-10 wt% Pb composite made by liquid phase
co-spray forming
Proc. Int. Conf. on "Recent Advances in Metallurgical Processes", (Eds.)
D.H. Sastry, E.S. Dwarakadasa, G.N.K. Iyengar and S. Subramanian, New
Age International Publishers, New Delhi, (1997) 925-930.
- Chokshi A.H. (Ed.)
Proceedings of the International Conference on "Superplasticity in
Advanced Materials", ICSAM-97, Special Issue of Materials Forum,
January, 243-245, 1997.
- Prasad, Y.V.R.K. and Sasidhara S. (Eds.)
Hot Working Guide - A Compendium of Processing Maps, ASM
International, May, 1997.
- Ranganathan S. (Ed.)
Iron and Steel Heritage of India, The Indian Institute of Metals and Tata
Steel, November, 1997.
- Ranganathan S., Abinandanan T.A., Bhaduri A.K. and Rodriguez P.
(Eds.)
Special Issue on 50 Years of Metallurgy - Retrospect and Prospect,
Transactions of the Indian Institute of Metals, December, 1997.
- Sastry D.H., Dwarakadasa E.S., Iyengar G.N.K. and
Subramanian S. (Eds.)
Proceedings of the International Confereence on "Recent Advances in
Metallurgical Processes", New Age International Publishers, New Delhi,
Volumes I & II, July, 1997.
- Subramanian S. and Natarajan K.A. (Eds.)
Special Issue on Mineral Processing, Transactions of the Indian Institute
of Metals, October, 1997.