Publications in the Year -1993
-
A. Bandopadhyay, U. Ramamurthy and E.S. Dwarakadasa
Strain localization behaviour of Al-Cu and Al-Li-Cu-Mg-Zr alloys due to
cathodic charging
J. Mat. Sci. Lett. 12 (1993) 555-557.
-
A. Bandopadhyay, U. Ramamurty and E.S. Dwarakadasa
Effect of cathodic charging on 8090-T851 under stressed and unstressed
conditions
in " Microstructuires and Mechanical Properties of Aging Material"
(Eds.) P. K. Liaw, R. Viswanathan, K. L. Murty, E. P. Simonen and D. Frear,
The Minerals, Metals& Materials Society,(1993) 519.
-
T.A. Bhaskaran, R.V. Krishnan, S. Ranganathan and K.F. Kelton
TEM studies of quasicrystals in a Ti-37 at% Mn alloy
in "Metastable Microstructures" (Eds.) D. Banerjee and
L. A. Jacobson, Oxford & IBH Publ.Co. Pvt. Ltd., New Delhi, (1992)
93-102.
-
T. Chandrasekaran and Kishore
Development of a new wear index in slurry erosion tests on steels
J. Mat. Sci. Lett. 12 (1993) 96-98.
-
T. Chandrasekaran and Kishore
Effect of microstructure and hardness on the grinding abrasive wear resistance
of a ball bearing steel
Wear 161 (1993) 105-109.
-
T. Chandrasekaran and Kishore
On the roughness dependence of wear of steels: a new approach
J. Mat. Sci. Lett. 12 (1993) 952-954.
-
K. Chattopadhyay
Growth and morphology of quasicrystals
Phase Traansitions 44 (1993) 69-79.
-
A. Dahlstedt, M.S. Ramanachalam, K.T. Jacob and S. Seetharaman
Matched thermochemical diagram for vacuum decarburization of ferroalloys
Scand. J. Metallurgy 22 (1993) 17-23.
-
R. Giridhar and M.K. Surappa
Effect of ageing on impact fracture behaviour of 2024 Al- Al2O3
composites made by casting route
Proc. of the ninth Internatl. Conf. on Composite Materials (ICCM/9), Madrid,
1993, p.219.
-
R. Goswami and K. Chattopadhyay
The superheating of Pb embedded in a Zn matrix: The role of interface melting
Phil. Magazine Lett. 68 (1993) 215-223.
-
R. Goswami, S. Banerjee, K. Chattopadhyay and A.K. Raychaudhuri
Superconductivity in rapidly quenched metallic systems with nanoscale structure
J. Appl. Phys. 73 (1993) 1-
-
A. Goyal, B.S. Murty and S. Ranganathan
Crystallization studies on amorphous Al-Y-Ni and Al-Y-Cu alloys
J. Mater. Sci. 28 (1993) 6091-6095.
-
J.P. Hajra and P. Rajasekharam
Thermodynamics of surfaces and adsorption in binary metallic systems
Scrpta Metall. Mater. 29 (1993) 1297-1302.
-
K.T. Jacob, T. Mathews and J.P. Hajra
Phase relations in the system Cu-Gd-O and Gibbs energy of formation of
CuGd2O4
Metall. Trans. 24A (1993) 1655-1660
-
K.T. Jacob, Sukanya Mukhopadhyay and A.K. Shukla
Gradient solid-electrolyte for use with dissimilar gas electrodes
Solid State Ionics 62 (1993) 27-37.
-
K.T. Jacob, Tom Mathews and J.P. Hajra
Gibbs' free energies of formation of Cu2Ln2O5
(Ln = Tb,Dy,Er,Yb) compounds
High Temperature Materials and Processes12 (1993) 251-258.
-
K.T. Kashyap, S. Murali, K.S. Raman and K.S.S. Murthy
Casting and heat treatment variables of Al-7Si-Mg alloy: Overview
Mat. Sci.& Technol. 9 (1993) 189-203.
-
S. Laiju, V. Rema, P. Devasia and K.A. Natarajan
Surface properties of thiobacillus ferrooxidans and its adhesion to mineral
surfaces
Curr. Sci. 65 (1993) 974-978.
-
J.S. Laskowski, S. Subramanian and G.A. Nyamekye
Polysaccharides - emerging non-toxic modifiers for differential flotation
of sulphides
in "XVIII International Mineral Processing Congress", The Australian
Institute of Mining and Metallurgy,(1993) 593-600.
-
H.K. Lee, M.G. Frohberg and J.P. Hajra
Surface tension measurements of liquid iron-nickel-sulphur ternary system
using the electromagnetic oscillating droplet technique
ISIJ International, 33 (1993) 833-838.
-
H.K. Lee, M.G. Frohberg and J.P. Hajra
The determination of the surface tensions of nickel-sulphur alloys using
the electromagnetic oscillating droplet technique
Can. Met. Q. 32 (1993) 289-294.
-
R.K. Mandal, S. Lele and S. Ranganathan
Twinning of quasicrystals and related structures
Phil. Mag. Lett. 67 (1993) 301-305.
-
T. Mathews and K.T. Jacob
Phase relations in the systems Cu-O-R2O3 (R = Tm,
Lu) and Gibbs energies of formation of Cu2R2O5
compounds
J. Mater. Chem. 3 (1993) 1025-1029.
-
T. Mathews and K.T. Jacob
Decomposition temperatures of Cu2Ln2O5(
Ln= Tb, Dy, Ho, Er, Tm, Yb, and Lu ) compounds
J. Mater. Res. 8 (1993) 3015-3018.
-
Tom Mathews, J.P. Hajra and K.T. Jacob
Phase relations and thermodynamic properties of condensed phases in the
system Ca-Cu-O
Chem. Mater. 5 (1993) 1669-1675
-
S. Murali, K.T. Kashyap, K.S. Raman and K.S.S. Murthy
Inhibition of delayed ageing by trace additions in Al-7Si- 0.3Mg cast alloy
Scipta Metall. Mater. 29 (1993) 1421-1426.
-
B.S. Murty
Mechanical alloying-a novel synthesis riute for amorphous phases
Bull. Mater. Sci., 16 (1993) 1-17.
-
B.S. Murty, M. Mohan Rao and S. Ranganathan
Nanocrystalline phase formation and extension of solid solubility by mechanical
alloying in Ti-based systems
NanoStructured Materials 3 (1993) 459-467.
-
B.S. Murty, S. Ranganathan and M. Mohan Rao
Thermodynamics of solid state amorphization by mechanical alloying
in "Metastable Microsctructures" (Eds.) D. Banerjee and L.A.
Jacobson, Oxford & IBH Publishning Co. Pvt. Ltd., New Delhi (1992)
239.
-
K.A. Natarajan
Biotechnology in gold processing
Bull. Mater. Sci. 16 (1993) 501-508.
-
K. Padmanabhan and Kishore
The looping behaviour of kevlar fibres
Scripta Metall. Mater. 28 (1993) 367-370.
-
D. Padmavardhani and Y.V.R.K. Prasad
Effect of zirconium on the processing maps for hot working of alpha and
alpha-beta brass
Z. Metallkd. 84 (1993) 1.
-
D. Padmavardhani and Y.V.R.K. Prasad
Processing maps for hot working of Cu-Ni-Zn alloys: Part I: alpha-nickel
silver
J. Mater. Sci. 28 (1993) 5269-5274.
-
D. Padmavardhani and Y.V.R.K. Prasad
Processing maps for hot working of Cu-Ni-Zn alloys Part II: alpha-ß
nickel silver
J. Mater. Sci. 28 (1993) 5275-5279.
-
R. Pragasam, C. Srinivasan, V.R.K. Murthy, B. Viswanathan, J. Sobhanadri,
K.M. Satyalakshmi and M.S. Hegde
Comparison of the effect of processing parameters and degradation on the
dc and microwave properties of thin films and polycrystalline bulk high
Tc superconducting materials
Supercond. Sci. Technol. 6 (1993) 402
-
T. Pramila, R. Sujatha, K.A. Natarajan, G. Ramananda Rao and C. Durga Rao,
Some genetic engineering aspects of development of copper resistance in
Thiobacillus ferrooxidans
Proceedings of the International Conferenceon "Advances in Chemical
Metallurgy" (Eds.) C.K. Gupta and M.K. Totlani, Bhabha Atomic Research
Centre, Bombay (1993) 95-97.
-
D. Preston, K.A. Natarajan, D.N. Sathyanarayana and G. Ramananda Rao
Surface chemistry of Thiobacillus ferrooxidans relevant to adhesion on
mineral surfaces
Applied and Environmental Microbiology, 59 (1993) 4051-4055.
-
D. Preston, K.A. Natarajan and G. Ramananda Rao
Attachment of Thiobacillus ferrooxidans to solid substrates
Proceedings of the International Conference on "Advances in Chemical
Metallurgy" (Eds.) C.K. Gupta and M.K. Totlani, Bhabha Atomic Research
Centre, Bombay (1993) 189-193.
-
K.V.R. Prasad, K.B.R. Varma, A.R. Raju, K.M. Satyalakshmi, R.M. Mallya
and M.S. Hegde
Growth and ferroelectric properties of Bi2VO5.5 thin films with metallic
LaNiO3 electrodes
Appl. Phys. Lett. 63 (1993) 1898-1900.
- A. Rajan and E.S. Dwarakadasa
Effect of chloride ion concentration during corrosion of medium strength
aluminium alloys 8090, 2091 and 2014
Brit. Corr. J. 28 (1993) 142-148.
-
A. Rajan and E.S. Dwarakadasa
Influence of enriched coppper on the corrosion of 8090 (aluminium-lithium
alloy) in chloride solutions
Aluminium India 4 (1993) 1-5.
-
U. Ramamurty, A. Bandopadhyay and E.S. Dwarakadasa
Effect of heat treatment environment on Li depletion and on mechanical
properties in Al-Li alloy sheets
J. Mat. Sci. 28 (1993) 6340-6346.
-
S. Ranganathan
Quasicrystals, crystals and twins- INSA Materials Science Prize Lecture-1991
Proc. Indian natn. Sci. Acad. 59A (1993) 533-548.
-
S. Ranganathan and B. Roy
Coindcidence site lattices revisited
in "Interfaces : Structure and Properties" (Ed.) S. Ranganathan,
C. S. Pande, B. B. Rath and D.A. Smith, Oxford & IBH Publishing Co.
Pvt. Ltd., New Delhi,(1992) 21-
-
S. Ranganathan, A. Singh, R.K. Mandal and S. Lele
Twinning of quasicrystals and related crystals
in "Crystal-Quasicrystal Transitions" (Ed.) M. J. Yacaman and
M. Torres, Elsevier Science Publishers B.V., (1993) 83-101
-
N. Ravichandran and Y.V.R.K. Prasad
Characterizatics of dynamic recrystallization domain in the processing
map for hot working of OFHC copper
Z. Metallkd. 84 (1993) 2-
-
A. Ravindra, E.S. Dwarakadasa, T.S. Srivatsan, C. Ramanath and K.V.V. Iyengar
Electron-beam weld microstructures and properties of aluminium-lithium
alloy 8090
J. Mater. Sci. 28 (1993) 3173-3182.
-
S. Ravindra Reddy and J.P. Hajra
Thermodynamics and phase equilibria in the system Ga-In using multi-parameter
functions
Calphad 17 (1993) 151-156.
-
S. Ravindra Reddy and J.P. Hajra
Thermodynamics and phase equilibria in the Ga-Sb system
Mat. Sci. & Engg. B20 (1993) 308-311.
-
K. Raviprasad and K. Chattopadhyay
The influence of critical points and structure and microstructural evolution
in iron rich Fe-Si alloys
Acta metall. mater. 41 (1993) 609-624.
-
K. Raviprasad, K. Aoki and K. Chattopadhyay
The nature of dislocations and effect of order in rapidly solidified Fe-
(5.5-7.5) wt.% Si alloys
Materials Science and Engineering A172 (1993) 125-135.
-
V. Sampath and E.S. Dwarakadasa
A study of the fatigue, impact and fracture toughness characteristics of
electroslag refined IS:7670 alloy
Can. Met. Q. 32 (1993) 57-67.
-
J. Sarkar and M.K. Surappa
Hot deformarion behaviour of 6061 Al-SiCpcomposites synthesised by casting
route
Proc. Intl. Conf. on Advanced Composite Materials,
(Eds.) T. Chandra and A. K. Dhingra, The Minerals, Metals & Materials
Society, 1993, pp. 1051.
-
J. Sarkar, Y.V.R.K. Prasad and M.K. Surappa
The constitutive flow behaviour of 6061 Al-SiCpcomposites at elevated temperature
Proc. of the ninth Internatl. Conf. on Composite Materials (ICCM/9), Madrid,(1993)
240.
-
V.K. Satish, Y.V.R.K. Prasad and S.K. Biswas
Microstructural features of flow instability in _-titanium cylinders under
high strain rate compression at 25 to 400
Metall. Trans. 24A (1993) 2503.
-
K.M. Satyalakshmi, R.M. Mallya, K.V. Ramanathan, X.D. Wu, B. Brainard,
D.C. Gautier, N.Y. Vasanthacharya and M.S. Hegde
Epitaxial metallic LaNiO3 thin films grown by pulsed laser deposition
Appl. Phys. Lett. 62 (1993) 1233-1235.
-
S. Seetharaman and K.T. Jacob
A new matched thermochemical diagram for vacuum refining of nickel and
cupronickel alloys
Proc. of The Paul E. Queneau Internatl. Symp. on "Extractive Metallurgy
of Copper, Nickel and Cobalt Volume I., Fundamental Aspects", (Eds.
R.G. Reddy and R.N. Weizenbach), The Minerals, Metals & Materials Society,
1993 pp. 41-58.
-
A. Singh and S. Ranganathan
Quasicrystalline and crystalline phases and their twins in rapidly solidified
Al-Mn-Fe alloys
J. Noncryst. Solids 153&154 (1993) 86-91.
-
A. Singh, A.K. Srivastava and S. Ranganathan
Electron microscopy of multiple twins in "Microstructure of Materials"
(Eds.) Kannan M. Krishnan, San Fransisco Press,Inc., USA, (1993) 152-158.
-
S.B. Singh,R. Goswami and K. Chattopadhyay
Hardness behaviour of ultrafine dispersed materials with soft dispersoid:
the case of rapidly solidified Zn-Bi immiscible alloy
Scipta Metall Mater. 28 (1993) 1507-1512.
-
O. Sivakesavam, I.S. Rao and Y.V.R.K. Prasad
Processing map for hot working of as cast magnesium
Mat. Sci & Technol. 9 (1993) 805-810.
-
A.K. Srivastava, S. Ranganathan and S.N. Ojha
Effect of processing on the microstructural development in a rapidly solidified
Al- Fe_V-Si alloy
From "Processing and Fabrication of Advanced Materials for High Temperature
Applications-II" (Eds.) V. A. Ravi and T. S. Srivatsan,The Minerals,
Metals & Materials Society, (1993) 253-265.
-
D. Srivastava, K. Madangopal, S. Banerjee and S. Ranganathan
Self accommodation morphology of martensite variants in Zr- 2.5 wt% Nb
alloy
Acta metall. mater. 41 (1993) 3445-3454.
-
S. Subramanian and J.S. Laskowski
Adsorption of dextrin onto graphite
Langmuir, 9 (1993) 1330-1333.
-
S. Subramanian, K.A. Natarajan, K.S. Gandhi and R. Kumar
Studies on bacterial leaching of Malanjkhand copper ores
Proceedings of the International Conference on "Advances in Chemical
Metallurgy" (Eds.) C.K. Gupta and M.K. Totlani, Bhabha Atomic Research
Centre, Bombay (1993) 697-718.
-
M. Sukanya and K.T. Jacob
Thermodynamic study of mixed anionic solid solutions using gradient solid
electrolytes - system K2CO3-K2SO4
J. Electrochem. Soc. 140 (1993) 2629-2635.
-
M.K. Surappa
On the nature of particle flow during extrusion of cast 6061 Al/SiCp
composites
J. Mat. Sci. Lett. 12 (1993) 1272-1273.
-
M.K. Surappa and P. Sivakumar
Fracture toughness evaluation of 2040-Al/Al2O3 particulate
composites by instrumented impact
Composites Science and Technology 46 (1993) 287-292.
-
K.R. Udupa, S. Subramanian, D.H. Sastry and G.N.K. Iyengar
Studies on includion characterization in electroslag refined En 24 steel
Materials Forum 17 (1993) 225-234.
-
S. Venugopal, S.L. Mannan and Y.V.R.K. Prasad
Influence of state of stress on the processing map for hot working of stainless
steel type AISI 304L: compression vs.torsion
Mat. Sci. Engg.A160 (1993) 63-69.
-
S. Venugopal, S.L. Mannan and Y.V.R.K. Prasad
Processing map for mechanical working of stainless steel type AISI 316L
Scripta Metall. Mater. 28 (1993) 715-720.
-
S. Venugopal, S.L. Mannan, S. Sasidhara and Y.V.R.K. Prasad
Design and fabrication of silicon carbide split furnace for high-speed
compression tests upto 1573K
Experimental Techniques, March/April 1993, p.36-40
-
S. Venugopal, S.L. Mannan and Y.V.R.K. Prasad
Processing map for hot working of as- cast stainless steel type AISI 304
Metals Materials And Processes, 5 (1993) 1-12.
-
S. Venugopal, S.L. Mannan and Y.V.R.K. Prasad
Processing map for cold and hot working of as-cast stainless steel type
AISI 304
J. Mat. Sci. Lett. 12 (1993) 1875-1878.
-
S. Venugopal, S.L. Mannan and Y.V.R.K. Prasad
Influence of cast versus wrought microstructure on the processing map for
hot working of stainless steel type AISI 304
Materials Lett. 17 (1993) 388-392.
-
S. Venugopal, S.L. Mannan and Y.V.R.K. Prasad
Processing map for cold and hot working of stainless steel type AISI 304
J. Nuclear Mat. 206 (1993) 77-81.
-
S. Venugopal, S.L. Mannan and Y.V.R.K. Prasad
Processing map for hot working of stainless steel type AISI 316L
Mat. Sci. & Technol. 9 (1993) 899-906