Graduates ME 1970-79

1970

R.T. Bhat

R. Dinkar Babu
(M. Mohan Rao)
Studies on Fe-Mn solvus lines

Jagannath Pujini
(R.M. Mallya)
Intermetallic compounds

S.K. Datta
(R.M. Mallya)
Fundamentals of glass to metal bonding

George Thomas

M.L. Shankar Shastry

T. subba Reddy
(A.A. Krishnan)
Dispersion hardening in nickel-zirconia at low temperatures

A. Shantharam
(K.P. Abraham)
Production of high grade standard grade ferro-chrome from lowgrade
chromite ores of Mysore

1971

Miss H. Chandra
(E.S. Dwarakadasa)
Studies on low temperature plastic deformation in commercial aluminium

R. Kripakaran
(M. Mohan Rao)
Thermal stabilisation

Dwarika Prasad
(K.P. Abraham)
The design, construction and operation of liquid metal solution
calorimeter

K. Ramaraju
(Y.V.R.K. Prasad)
Microstructural aspects of fatigue in Al and Al-Mg alloy

J. Ravindranath Shetty
(K.I. Vasu and Y.V.R.K. Prasad)
Stress corrosion cracking in Cu-12 Al alloy

C. Virupaksha Shastry
(D.H. Sastry and E.S. Dwarakadasa)
The unidirectional solidification of binary eutectic alloys

P.K. Balachandra
(K.P. Abraham)
Smelting of chromite ores in a tilting arc furnace designed and fabricated in the Department

K.L. Bhat
(K.I. Vasu)
High temperature oxidation of Cu and its alloys

Bhushan Lal Dhar
(K.I. Vasu)
Codeposition of Ni-Co alloys from fluoborate bath

Samir Nath Jha
(K.I. Vasu & E.S. Dwarakadasa)
Cavitation erosion of some marine alloys

Chiranjit Lal
(K.P. Abraham)
Production of nodular cast iron by electroslag process

S. Raghavan
(K.P. Abraham)
Thermodynamic properties of binary systems of high temperature solid electrolytes galvanic cell technique

V. Sivan
(K.P. Abraham)
Kinetic studies on the roasting of cadmium sulphide

1972

S. Ananth Padmanabha
(K.I. Vasu)
Electrodeposition of iron group binary alloys

B. Chandrasekhara Pai
(E.S. Dwarakadasa)
Structural studies of unidirectionally solidified eutectic alloys

A.D. Ghopde
(K.I. Vasu)
Design and construction of a vacuum and mass flow type recording thermobalance and studies on initial oxidation of copper

N. Jayaraman
(D.H. Sastry)
Structural and resistometric studies of the order-disorder transfor-mation in Cd-Mg alloys

C. Kannan
(K.P. Abraham)
Electroslag refining of aluminium

S. Ramadurai
(K.P. Abraham)
Studies on chemical vapour deposition

K.R. Ramesh
(K.I. Vasu)
Leaching of chalcopyrite

N.S. Srinivasan
(K.I. Vasu)
High temperature oxidation of Cu and Cu-Th alloys electrodeposition of Fe-Ni & Fe-Co alloy from the fluoborate bath

A.M. Sriramamurthy
(K.P. Abraham & M. Mohan Rao)
Thermodynamics and structural transformation in Sn-antimony system

Surendra Kumar Singh
(K.P. Abraham)
Kinetics of reduction of manganese dioxide pellets with hydrogen

V. Vijaya Prasad
(K.I. Vasu)
Electrolytic leaching of lemenite ore

Vinod Kumar Juneja
(E.S. Dwarakadasa)
Bearing characteristic and aluminium base bearing alloy

1973

R. Sellamuthu
(K.P. Abraham jointly with MRS, ME)
Application of ESR technique for the production of nodular cast iron

S.V. Prasad
(K.P. Abraham)
Electrochemical measurements of oxidation of Cu

T.K. Prasad
(K.I. Vasu)
Diffusion control in solid-fluid reactions

K. Narayan Rao
(K.P. Abraham)
A thermal analysis calorimeter for the determination of heats of transformations

V. Nagarajan
(M. Mohan Rao)
Multiphase diffusion in the system Cd-Zn

R. Lakshminarayan
(K.S. Raman)
Resistometric studies of phase boundaries in Sn-Cd alloy

K.M. Khaji
(K.P. Abraham)
Kinetics of reduction of cobalt oxide by hydrogen in fluidised bed

D.S. Jayasimha
(K.I. Vasu)
Extraction of copper from chalcopyrite concentrate by hydrometal- lurgical treatment

R.K. Galgali
(K.I. Vasu & Y.V.R.K. Prasad)
A study of the microstructural aspects of the fatigue in 70-30 brass

K. Chadramouli
(D.H. Sastry)
Mechanical properties of unidirectionally solidified eutectic alloys

R. Anand
(K.I. Vasu)
Extraction of copper from chalcopyrite concentrate by hydro-metallurgical treatments.

1974

T.L. Prakash
(R.M. Mallya & V.S. Arunachalam (NSL)
Powder metallurgy of chromium

D.L. Saralaya
(K.I. Vasu)
Deformation behaviour of chromium

J. Subramanyam
(K.P. Abraham)
Application of high tempeature solid electrolyte galvanic cell

V. Narayanan
(J.P. Hajra)
Thermodynamics of binary and ternary silicate slags

S. Ramachandran
(P.K. Rohatgi)
Studies on bearing characteristics of Al-graphite composites

H.N. Yogarajan
(K.P. Abraham)
Activities in calcium oxide solid solutions

A. Sreerama Murthy
(K.P. Abraham)
Electroslag remelting of non-ferrous metals and alloys with special performance to titanium

C.L. Srinivasa
(K.I. Vasu & K.S. Raman)
Slat baths for industrial heat treatment

V.N. Mohan
(P.K. rohatgi & K.K. Prasad)
Permanent mould casting – A thermal study

N. Kodanda Rao
(A.K. Lahiri)
Temperature profile in the blast furnace stack

S. Ilangovan
(K.I. Vasu)
Direct electro-recovery of copper from chalcopyrite concentrates used as a slurry anode

A.H. Yagneswaran
(R.M. Mallya)
Power metallurgy of stainless steel: Production of austenitic stainless steel power by intergranular and corrosion

T. Balakrishna Bhat
(Kishore & K.I. Vasu)
Effect of dispersion on ordering in Cu-Au

1975

B.V. Srikanta Pandits
(R.M. Mallya)
Submicron particles produced by freeze drying – preparation of nickel ferrite

Prabhakar Singh
(K.P. Abraham)
Thermodynamic measurements in the MgO-SiO2 by high temperature galvanic – cell technique

B.C. Jana
(P.K. Rohatgi)
Bearing characteristics of Al-graphite composites

V. Babu Sathyan
(K.I. Vasu)
Design and development of acid pumps using high silicon iron

1976

Madhusudhan
(R.M. Mallya)
Studies on metastable phases

M.S. Suryaprakash
(P.K. Rohatgi)
Design, fabrication and characteristics of biogas fired curcible furnace

V. Didolkar
(U.B. Nayak)
Beneficiation of low grade graphite ore from Ganacharpura Mines, Kolar district, Karnataka

Ajay Kumar Mishra
(A.K. Lahiri & K.P. Abraham)
Reduction of haematite with methane

1977

K.P. Panickar
(R.M. Mallya & A.C. Raghuram (NAL)
Mechanical alloying

R.P. Bhat
(M. Mohan Rao)
Studies on the reclamation of Inconel X-750 turbine blades

T.G. Prakash
(K.I. Vasu)
Processing of chalcopyrite concentrations : Ferric chloride leaching and galvanic cementation

K.S. Narayan
(E.S. Dwarakadasa)
Isothermal age hardening characteristics of Al-6Zn alloy with .05 Be addition

U. Balachandran
(K.P. Abraham)
Chemical vapour deposition of titanium carbide on tool steels

1978

K. Mohanan
(K.I. Vasu)
Electrowinning of copper

H.S. Prakash
(K.I. Vasu)
Ferric chloride leaching process for the complex copper-lead-zinc concentrates

M. Ambethkar
(K.I. Vasu)
Surface conversion coatings

1979

Sarma, V.S. Vedula
(Y.V.R.K. Prasad)
Hot working characteristics of EN36A steel : A study by hot torsion technique

V.V.R.S. Sarma
(D.H. Sastry)
Effect of grain size on the high temperature yield stress in zinc and cadmium

M. Rao Arun
(K.S. Raman & M.R. Seshadri)
Studies on inclusion rating and dendrite arm spacing of steel castings

S. Rajendra
(Y.V.R.K. Prasad)
Design and fabrication of hot extrusion die assembly for the 250 ton hydraulic press

Shah, Kamal Kumar
(M. Mohan Rao)
Studies on isothermal decomposition of supersaturated phases in the Cu-Zn systems

S. Gowrishankar
(K.I. Vasu)
Reflectance of metallic mirrors

B. Gopala
(K.I. Vasu & E.S. Dwarakadasa)
Production of iron powder

Ashok Kumar, V. Lad
(K.I. Vasu)
Surface conversion coatings on metals