|
CV |
|
Education |
|
|
|
1984 |
Ph. D. Materials Science & Engineering: Stanford University |
|
|
1978 |
B.A. Natural Sciences: Cambridge University |
|
|
Experience |
|
|
|
2022-present |
Honorary Professor, Department of Materials Engineering, Indian Institute of Science, Bangalore |
|
|
2015-2021 |
Chairman (Dean), Division of Mechanical
Sciences, Indian Institute of Science, Bangalore |
|
|
2009-2015 |
Chairman, Department of Materials Engineering, Indian Institute of Science, Bangalore |
|
|
2002-2009 |
Professor, Department of Materials Engineering (Metallurgy), Indian Institute of Science, Bangalore |
|
|
1996-2002 |
Associate Professor, Department of Materials Engineering (Metallurgy), Indian Institute of Science, Bangalore |
|
|
1990-1996 |
Assistant Professor, Department of Materials Engineering (Metallurgy), Indian Institute of Science, Bangalore |
|
|
1987-1989 |
Assistant Research Engineer, University of California, Santa Barbara Research in the fields of Rapid solidification of Ceramics, Fabrication of Ceramic Composites, Fracture of Interfaces |
|
|
1984-1986 |
Staff Scientist, Lawrence Berkeley Laboratory Research in the field of Ceramic metal adhesion, Fracture Toughness of Interfaces, Phase transformations and precipitations in Alumina |
|
|
1978-1984 |
Research Assistant, Department of Materials Science & Engineering, Stanford University Ph.D Dissertation on "Crack Initiation and Deformation in WC-Co" Teaching of Laboratory Courses and Problem Sessions on the Application of Crystallography and Diffraction in Materials Science |
|
|
Honours |
|
|
|
2020 |
Lifetime Achievement Award,
Electron Microscopy Society of India |
|
|
2017 |
JC Bose Fellowship, Department of
Science & Technology, Govt. of India |
|
|
2013 |
GD Birla Gold Medal, Indian Institute of Metals |
|
|
2012 |
JC Bose Fellowship, Department of Science & Technology, Govt. of India |
|
|
2010 |
Fellow, American Ceramic Society |
|
|
2009 |
Fellow, Indian National Science Academy, Indian Institute of Metals |
|
|
2008 |
Satish Dhawan Professor, Indian National Academy of Engineering |
|
|
2006 |
Alumni Award for Excellence in Research for Engineering, Indian Institute of Science |
|
|
2005 |
Fellow, Indian Academy of Engineering |
|
|
2004 |
Fellow, National Academy of Sciences |
|
|
2003 |
Fellow, Indian Academy of Sciences |
|
|
2000 |
National Metallurgist Day Award, Indian Institute of Metals |
|
|
1997 |
Materials Research Society of India Medal Lecture |
|
|
1983 |
Presidential Scholar, Electron Microscopy Society of America |
|
|
1972 |
Commonwealth Scholarship to study for the Advanced Level in the UK |
|
|
Professional activities (*at present) |
|
|
|
President |
Indian Structural
Integrity Society* |
|
|
Research Council |
Defence Metallurgical Research Laboratory Advanced Research Centre International (Chairman, Technical Advisory Board)* Sree Chitra Tirunal Institute of Medical Science & Technology Board of School of Engg. Sciences & Tech., Univ. of Hyderabad National Institute of Engineering (Mysore) Kongu Engineering College, Erode* |
|
|
Chairman |
Materials, Metallurgy and Minerals Programme Advisory Committee, DST Project Assessment and Review Committee (Coatings-GTMAP- Aeronautical R&D Board) |
|
|
Associate Editor |
Journal of the American Ceramic Society* Materials Science & Engineering-B* Bulletin of Materials Science Trans. IIM, Trans. ICerS |
|
|
Member |
Empowered Committee
(SERB)* Research Council-AMPRI Bhopal American Ceramic
Society Materials Research Society of India Indian Institute of
Metals |
|
|
Reviewer |
Journal of the American
Ceramic Society Journal of Materials
Research Materials Science and
Engineering J Materials Science,
etc. |
|
|
Patents |
|
|
A Process for Producing Wear Resistant Ceramics No.860/Mas/94, Inventors: V. Jayaram, R. Manna, M. G. Kshetrapal and S. K. Biswas |
|
|
A Method of Making Aluminum Matrix Composites by Pressureless infiltration of Liquid Metal No.2359/Mas/97, Inventors: B. Srinivasa Rao and V. Jayaram |
|
|
A Method of Making Al rich and AlN rich Matrix Composites by Pressureless infiltration of molten Aluminum Alloys using an Exteranl Getter No.365/Mas/2000, Inventors: B. Srinivasa Rao and V. Jayaram |
|
|
An
improved anode composition for internal reforming solid oxide fuel cell and a
process for fabrication thereof S Senthil
Kumar, S T Aruna and B Shri Prakash (National Aerospace Laboratories) and
Vikram Jayaram (IISc) |
|
|
A system and method for determination of
power law creep parameters from a single bending test Syed Idrees
Afzal Jalali, Praveen Kumar, Vikram Jayaram IN Patent App. 201,941,028,031 |
|