Past Members (Group
Alumni): |
|
Ph.D. |
|
|
34 |
Mr. Faizan Hijazi |
Thesis: High-throughput
bending tests for investigating creep behavior affected by structural and
microstructural inhomogeneities |
Submitted |
33 |
Mr. Sachin Kumar |
Thesis: |
Submitted |
32 |
Dr. Mahesh Kumar Kumawat |
Thesis: Uniaxial fatigue
behavior of freestanding Platinum Aluminide (Pt-Al) bond coat |
January-2024 |
31 |
Dr. Ananya Tripathi |
Thesis: Comprehensive
investigation of effect of composition, orientation and temperature on
mechanical behavior of NiAl-X (X=Pt,Pd) alloys |
October-2023 |
30 |
Dr. Priya Goel |
Thesis: Extraction of
equivalent uniaxial plastic and viscoplastic behavior from bending using a
mechanistic approach. |
September-2022 |
29 |
Dr. N. Esakkiraja |
Thesis: Processing,
microstructure, and fracture characteristics of high volume fraction (Al2O3/Al-AlN)
matrix composites |
June-2021 |
28 |
Dr. Syed Idrees Afzal Jalali |
Thesis: Bending-Creep,
High Throughput Testing, Size Effects in Creep. |
September-2020 |
27 |
Dr. Devi Lal |
Thesis: Effect of
Sintering on Microstructure and Mechanical Properties of Air Plasma Sprayed 7
wt.% Y203 Stabilized ZrO2. |
June-2020 |
26 |
Dr. Manu S Mohan |
Thesis: Microstructure and
Shape Memory Behavior of Quaternary Ni (50-x)-(Pt/Pd)x-Ti(50-y)-(Hf/Zr)y
Alloys |
June-2020 |
25 |
Dr. Gopakumar P (ERP) |
Thesis: Influence of
surface topography and tribosystem on reciprocating friction in sparsely
lubricated contacts. |
June-2018 |
24 |
Dr. Senthilkumar S (ERP) |
Thesis: Studies on
Internal Reforming Solid Oxide Fuel Cell. |
June-2018 |
23 |
Dr. Kaustubh Venkatraman |
Thesis: Testing
Methodologies for Porbing Site Specific Fatigue Response of Graded Coatings. |
June-2018 |
22 |
Dr. Sumanth G |
Thesis: Effect of humidity
and temperature on wear of TiN and TiAIN coatings |
December-2017 |
21 |
Dr. Adarsh K. Hegde |
Thesis:
Dry Sliding Wear of Saffil Short Fibre Reinforced AZ91D Mg Alloy Composite.
|
2017 |
20 |
Dr. Tomoghna Chakrabarti |
Thesis: Study on Reactive
Hot Pressing of Zirconium Carbide |
2014 |
19 |
Dr. Nagamani Jaya B |
Thesis: Micro-scale
fracture testing of graded (Pt,Ni)Al bond coats |
2014 |
18 |
Dr. Soupitak Pal |
Thesis: Microstructural
Developments and Mechanical Properties of Electroless Ni-B Coatings |
2014 |
17 |
Dr. Manish Patel |
Thesis: Densification,
Oxidation, Mechanical and Thermal Behaviour of Zirconium Diboride (ZrB2) and
Zirconium Diboride-Silicon Carbide (ZrB2-SiC) Composites. |
2014 |
16 |
Dr. Praveena M |
Thesis: Design,
Fabrication and Application of In situ Total Internal Reflection (TIR) Raman
Tribometer For the Chemical analysis of Tribological Systems. |
20104 |
15 |
Dr. Md. Zafir Alam (ERP) |
Thesis: Tensile Behavior
Of Free-Standing Pt-Aluminide(PtA) bond Coats |
2013 |
14 |
Dr. Nisha Verma |
Thesis: Mechanism and
modeling of contact damage in ZrN-Zr and TiAIN-TiN multilayer hard coatings |
2013 |
13 |
Dr. R. Krishnan (ERP) |
Thesis: Investigations on
the properties of TiN, NbN thin films and multilayers by Reactive pulsed
laser deposition |
2011 |
12 |
Dr. Arindam Paul |
Thesis: The Processing,
Consolidation the Deformation Behavior of Bulk Amorphous Al2O3-Y2O3
Ceramics |
2010 |
11 |
Dr. Bhaskar Prasad Saha |
Thesis: Processing of
Zirconia based honeycombs and Evaluation of thermo-mechanical properties |
2009 |
10 |
Dr. L. Rangaraj (ERP) |
Thesis: Reactive Hot
Pressing of ZrB2 Based Ultra High Temperature Ceramic Composites |
2009 |
9 |
Dr. S J Suresha |
Thesis: Processing,
interface microstructure and mechanical properties of monolithic and
multilayer columnar ceramic films |
2007 |
8 |
Dr. Debdutt Patro |
Thesis:Kinetics of
pressureless infiltration of Al-Mg alloys into Al2O3
preforms: A non-uniform capillary model |
2007 |
7 |
Dr. R. Kavitha |
Thesis: Development and
Study of Oxide Films by Combustion Flame Pyrolysis |
2005 |
6 |
Dr. Sanjit Bhowmick |
Thesis: The Nature of
Contact-Induced Deformation and Fracture in TiN Films on Steel |
2004 |
5 |
Prof. Ashutosh Suresh Gandhi |
Thesis: The processing of
bulk metastable amorphous and nanocrystalline ZrO2-Al2O3
ceramics by pressure consolidation of amrophous powders |
2001 |
4 |
Dr. B. Srinivasa Rao |
Thesis: Pressureless
infiltration of A1-Mg based alloys into Al2O3 preforms |
2000 |
3 |
Dr. S. Prakash Narayan |
Thesis: The effect of
strain rate and temperature on the development Of magnetic properties in
nanocrystalline Nd-Fe-B alloy |
1998 |
2 |
Dr. Tania Bhatia |
Thesis: Phase evolution in
MgO-MgAl2O4 under non-equilibrium processing conditions |
1998 |
1 |
Dr. N. Nagendra |
Thesis: Processing,
microstructure and fracture characteristics of high volume fraction (Al2O3/Al-AlN)
matrix composites |
1998 |
M.Sc.
|
Prashant Potnis Ramesh (Jun. 2007), Study of fractur properties of NiAl bondcoats on Nickel supper alloy by three point bending of microbeams |
|
L Rangaraj (Jan 2003), Reactive Hot Pressing of Titanium Nitride (TiN)- Titanium di-boride (TiB2) composites under moderate pressure and temperature |
|
S R Hegde (Oct 2002) Deposition of 8 wt% Yittria Stabilized Zirconia Coatings by Flame Pyrolysis of Solution Presursor |
|
S. Swaminathan (Nov. 2000), Processing and characterisation of bulk Al2O3 p/AIN-Al composites by pressureless infiltration |
|
R. Arvind Singh (Feb. 1997), Studies of abrasion and microresidual stresses of (Al2O3-SiC-[Al, Si]) Composite made by melt oxidation |
|
H. R. Muralidhar (Aug. 1992), Al2O3/Al Composites from Al-Zn alloys : Growth and infiltration mechanisms |
|
S. P. Dhandapani (Jan. 1992), Studies on the growth of Al2O3/Al composite into SiC preforms and Preliminary studies on the processing of intermetallic matrix composites |
M. E.
|
Poorwa Bhagwat (July. 2007), Study of fatigue of TiN coating on stainless steel by four point bending |
|
Hari Srinivas Goripati (July 2006), Deposition of 8 mol% Yttria Stabilized Zirconia by Combustion Flame Pyrolysis and its Thermal Fatigue Study |
|
Sugeetha V (July 2006), A Study of Contact Indentation Fatigue Damage of TiN Thin film on Stainless Steel Substrate |
|
Santhosh Kumar Meghani (July 2005), SynThesis of Titanium Oxide Films by Flame Spray Pyrolysis and their Characterization |
|
Pradeep Kumar Kraleti (July 2005), Contact Fatigue Behaviour of TiN Films by Indentation Technique |
|
Prakash M. Kini (July 2004), Processing of Al2O3 - ZrO2 - SiC Nanocomposites by pressure aided densification of bulk amorphous compacts |
|
S. Vijay Karthik (July
2004), Preparation and characterization of lead zirconate titanate (PZT)
films by flame spray pyrolysis |
|
Satya Pal Singh (Jan
2002), To find out suitable insert parameters for stainless steel turning |
|
Ashis Chowdhury (Jan
2001), Mathematical modeling of the mean flow stress of C-Mn steels during
rolling and the prediction of rolling force |
|
Debdutt Patro (Jan.
2000), Phase evolution studies in ZnO-Al2O3 as synThesised
by spray pyrolysis and by citrate-gel routes |
|
Anupam Panwar (Jan.
2000), Combustion synThesis and consolidation of 3mol% YSZ |
|
Pankaj Kumar Jain (Jan.
1999), Processing and characteriztion of SiCP reinforced (Al-AlN)
matrix composites produced by Directed Melt Nitridation |
|
K. R. Balasubramanian (July
1999), Low temperature synThesis of yttrium aluminate powders and
films via spray pyrolysis route |
|
M. Kumar (Jun
1998), Surface modification of Al2O3/SiCP/Al
composite and hot pressing of Al2O3/SiC whiskers |
|
Ratna Pal (Jan
1998), SynThesis and characterisation of finely dispersed PB in alumina |
|
Rohit Shukla (Jun
1997), Surface modification of SiC/ Al2O3/Al 'Dimox'
composites and / hot pressing of SiCw/ Al2O3 composites |
|
Gautam Mukherjee (Jan
1997), Ball-milling of spray pyrolysed ZrO2-Al2O3
powders |
|
Srinivasan Raghavan (Jan
1996), A study on the processing and 'Levitation-Induction' sintering of
composite powders |
|
D. Srinivasa Murthy (July 1995), Hot deformation behaviour of Al2O3 /AlN/Al comp |
|
Ajay Chauhan (Jan
1995), Phase evolution, segregation and grain coarsening behaviour in Al2O3-MgO
as synthesized using spray pyrolysis |
|
Sandeep Kumar (July
1994), Role of SiC pre-oxidation and alumina coating in processing of SiC/ Al2O3
/Al ceramic matrix composites |
|
Ashutosh S. Gandhi (Jan
1994), Aerodynamic levitation and induction melting for solidification
studies on a high temperature oxide system |
|
M. V. Siva Raman (Jan
1992), Design and fabrication of a HFCVD reactor for synThesis of
diamond thin films |
|
Sanal Kumar S (June
1991), Aerodynamic levitation for undercooling studies on ceramics |
|
H. Gopal (June 1991), On the estimation of
binding energy of a - Al2O3 |