Category Archives: Seminars/Talks

5 Dec 2017 @ 11am: PhD Colloquium by Mr. Hariprasad G

Name of student   :  Mr. Hariprasad G
Thesis Title      : “Synthesis, microstructural stability and high temperature  deformation of alumina carbon nanotubes composites”
Faculty advisor   :   Prof. Atul H Chokshi 
Date              :   Tuesday   5th December 2017
Time              :   11.00 A.M
Venue             :    Materials Engineering Lecture Theatre

Alumimium oxide is a structural ceramic material which finds numerous applications in diverse fields.  Poor fracture toughness and high temperature formability are difficulties that restrict its widespread use. Carbon nanotubes (CNT) are possibly ideal reinforcements to overcome some of these shortcomings.  However, a uniform dispersion of carbon nanotubes in alumina poses a significant challenge, which needs to be addressed to realize the potential benefits offered by CNT reinforcement.  This thesis deals with processing techniques to obtain a uniform, well dispersed CNT dispersed alumina composite.  The microstructural stability is assessed through high temperature grain growth experiments.  It is observed that with relatively small CNT additions,the matrix grain size is stabilized to a submicrocrystalline size regime.  A limiting grain size is observed in all composites  above  a nominal CNT volume fraction.  The influence of CNTs in the grain growth behaviour is analyzed through a grain boundary dragging model and the effect of the CNT volume fraction on the limiting grain size is understood using a geometrical model.  The high temperature deformation behaviour of the composites is studied using constant load compression creep experiments.  Steady state creep behaviour is observed for all composites.  At modest temperatures and applied stresses the composites deform with fairly high strain rates.  The influence of CNT reinforcement and the effect of volume fraction is analysed by comparing results with creep data for pure alumina.  In conjunction with microstructural characterization and experimental determination of creep parameters, the deformation mechanism of CNT reinforced alumina composites is deduced as Coble diffusion creep and interface reaction controlled Coble creep.  Based on the recent diffusivity measurements obtained from the literature, it was observed that the creep data agreed well with the theoretical predictions from a Coble creep deformation.

Tea and Coffee: 10.45 AM


4 Dec 2017 @ 2.30pm: Seminar by Sarma Kanchibotla

Department of Materials Engineering
Indian Institute of Science
The Indian Institute of Mineral Engineers, 
Bangalore Chapter 
Speaker & Affiliation  :      Sarma Kanchibotla
                              JKMRC, The University of Queensland
                              Brisbane, Queensland, Australia
Title                 :      “Mine to mill value chain optimisation and its imapct on mining industry”
Date & Time           :      Monday 4th Dec 2017, 02:30 PM
Venue                 :      Lecture Theatre, Materials Engineering
Coffee & Tea - 02.15 PM


24 Aug 2014 @ 3.30pm: Seminar by Prof. Veena Sahajwalla

Speaker & Affiliation :Prof. Veena Sahajwalla
                       Australian Research Council (ARC)
                       Laureate Professor
                       Director, Centre for Sustainable Materials Research & Technology
                       Technology School of Materials Science & Engineering
                       UNSW, Sydney, Australia

Title                 :“Reviving Waste in Green Manufacturing:
                        Creating new solutions through Innovation and Partnerships”

Date & Time           : Thursday, 24th August 2017, 03:30 PM

Venue                 : Lecture Theatre, Materials Engineering

21 Aug 2017 @ 4pm: Prof. BRAHM PRAKASH MEMORIAL LECTURE by Professor V. Ramgopal Rao, Director, IIT Delhi

      The Chairman, Department of Materials Engineering
   The Chairman & Members of The Indian Institute of Metals
                    Bangalore Chapter

           Cordially invite you to Thirty Third


                      on the topic -

         *Bridging Academic R&D with Product Innovation -

          *  A few case studies and a way forward..... *


               Professor V. Ramgopal Rao
        Director, Indian Institute of Technology, Delhi

Scheduled on Monday, August 21, 2017 @ 4:00 p.m. in the Faculty Hall, IISc

                  Professor Vikram Jayaram
          Chairman, Division of Mechanical Sciences,

      has kindly consented to preside over the function.


4.00 P.M.  Welcome -Prof. Satyam Suwas, Hon Chairman, IIM(BC)

4.05 P.M.  Introduction of the Speaker - Prof. Vikram Jayaram

4.15 P.M.  Lecture                     - Prof.V. Ramgopal Rao

5.15 P.M.  Presidential Remarks        - Prof.Vikram Jayaram

5.25 P.M.  Vote of Thanks              - Dr.Abhik N.Choudhury
                                         Hon.Secretary, IIM(BC)
5.30 P.M.  Tea

9 Aug 2017 @ 3.30pm: Seminar by Prof. Laszlo S. Toth, CNRS/Université de Lorraine, France

Speaker : Prof. Laszlo S. Toth

Affiliation : Director, Laboratory of Excellence on Design of Alloy Metals for low-mAss Structures (DAMAS), and Professor, Laboratoire d’Etude des Microstructures et de Mecanique des Materiaux (LEM3), UMR7239, CNRS/Université de Lorraine, F-57045 Metz, France

Aditya Birla Chair Professor, IISc, Bangalore

Title : “Insight in the deformation mechanisms in ultra-fine and nanocrystalline materials during severe plastic deformatiobytexture modeling”

Date & Time : Wednesday 9th August 2017, 03:30 PM

Venue : Lecture Theatre, Materials Engineering